Mikelindsey Posted March 7, 2015 Share Posted March 7, 2015 How many times can you use corncob media for tumbling? Link to comment Share on other sites More sharing options...
45 Raven Posted March 7, 2015 Share Posted March 7, 2015 Dozens and dozens, with an occasional refreshing with an additive designed specifically for cleaning brass such as Dillon Rapid Polish 290 or as provided by several other manufacturers. Typically, I replace the media when it begins to darken/discolor significantly or if I observe the grain size beginning to break down. Link to comment Share on other sites More sharing options...
Sarge Posted March 7, 2015 Share Posted March 7, 2015 same here. I use it until it turns black/green and quits polishing as well. Link to comment Share on other sites More sharing options...
Mikelindsey Posted March 7, 2015 Author Share Posted March 7, 2015 Thanks Link to comment Share on other sites More sharing options...
427Cobra Posted March 8, 2015 Share Posted March 8, 2015 I don't use corn cob media, but 2 bags of walnut media from the pet store, renewed with Nu Finish car wax has lasted me 10 years, and should last another 10 years of weekly use. Link to comment Share on other sites More sharing options...
BeerBaron Posted March 9, 2015 Share Posted March 9, 2015 I've used plain corncob and crushed walnut with and without dillon rapid polish and found it was all sub par. What really works for me is the Lyman green corncob. It's amazing how well it cleans and polishes and how long it lasts. I shoot an average of around 200 rounds per week. When brand new it'll clean a tumbler full of brass in 40-60min! As it gets older the time creeps up. Once it needs 3 hours it's almost done. At that point it's usually more than a year or 10,000 rounds plus. Yes it's more expensive that plain corncob but it cleans better and lasts many many times longer. Try it once. Link to comment Share on other sites More sharing options...
Service Desk Posted March 9, 2015 Share Posted March 9, 2015 Put a teaspoon or two full of Mothers a Mag Wheel polish into a can with an ounce of Prepsol and mix to a slurry, pour onto the tumbler media and let it run for an hour to evaporate the Prepsol. The media will be good for another 5000. Link to comment Share on other sites More sharing options...
BanjoGunner Posted March 9, 2015 Share Posted March 9, 2015 I use mine until a residue just starts to accumulate on the walls of the tumbler. Replace the media, the residue comes off with the first batch, repeat... Link to comment Share on other sites More sharing options...
StealthyBlagga Posted March 9, 2015 Share Posted March 9, 2015 (edited) I have two tumblers. Tumbler #1 is for polishing dirty brass prior to reloading, and Tumbler #2 is used for removing case lube from processed .223 brass and live pistol ammo. Living in the Sonoran Desert, my fired brass picks up course sand and small rocks, and these accumulate in the Tumbler #1 media over time. About once a year I ditch the media from Tumbler #1 (and with it all the sand/rocks), replacing it with the clean-but-greasy media from Tumbler #2, plus a tablespoon full of Dillon polishing compound. Tumbler #2 in turn gets fresh corn cob media (but no polish). One tip to try: I throw a used clothes dryer sheet in with each lot of brass I tumble. The antistatic additive seems to help the media flow better during emptying/filling, the mesh of the sheet removes assorted detritus from the media (especially trimming swarf), and it makes the media smell nicer . Throw the sheet in the trash after each batch. Edited March 9, 2015 by StealthyBlagga Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now