ogiebb Posted May 7, 2014 Author Share Posted May 7, 2014 Ogiebb, what rear sight did you end up getting? i used the stock one but had the rear sight ion bonded to blacken out the dots and to make sure it remains black. Link to comment Share on other sites More sharing options...
kneelingatlas Posted May 18, 2014 Share Posted May 18, 2014 (edited) Here's a little project I've been playing with: I still need to shoot it Monday with the new sights but I thing I'm going to need to take some off the front (it came from a Desert Eagle .50!) Edited May 18, 2014 by kneelingatlas Link to comment Share on other sites More sharing options...
tanfogliocoe Posted June 5, 2014 Share Posted June 5, 2014 What is the ideal OAL for a baby eagle in 9mm?? Link to comment Share on other sites More sharing options...
kneelingatlas Posted June 5, 2014 Share Posted June 5, 2014 What is the ideal OAL for a baby eagle in 9mm?? That depends on the bullet, nothing longer than 1.170" to avoid mag issues, but anywhere from 1.100" should work. I use 1.135" as my to go for Production loads. Link to comment Share on other sites More sharing options...
hal1955 Posted June 6, 2014 Share Posted June 6, 2014 1.105 oal..... VV 320.....124 or147 gr. for production loads. Link to comment Share on other sites More sharing options...
TheRook Posted February 4, 2015 Share Posted February 4, 2015 Greetings all, Really enjoying this thread - lots of great info. I have an older Jericho 941 FB (steel compact/ frame safety/ 9mm). I am looking to replace the stock thumb safety with an extended (non-ambi) Tanfoglio safety. Could someone direct me to the proper part? Thanks, J Link to comment Share on other sites More sharing options...
ogiebb Posted October 1, 2015 Author Share Posted October 1, 2015 ok bringing this back to life , I just picked up a a Jericho 941 with frame safety and no FPB .. will be posting pics soon Link to comment Share on other sites More sharing options...
snipe Posted December 7, 2015 Share Posted December 7, 2015 Hi there I just acquired a second hand Jericho 941F two toned in 9mm. Safefty is frame mounted and barrel has a polygonal rifling. The 1st owner acquired this unit way back in 2000 before moving to Australia. I got my eyes glued to this topic since last week after I got this gun. Great thread and lots of info. BTW, Im based here in Manila Philippines and former Glock 17 user he he Link to comment Share on other sites More sharing options...
jondextan Posted September 24, 2016 Share Posted September 24, 2016 Planning on getting a 941F, anybody here still using their BE2s in production? what have you done to the gun to make it shoot better than stock? Link to comment Share on other sites More sharing options...
ogiebb Posted September 24, 2016 Author Share Posted September 24, 2016 2 hours ago, jondextan said: Planning on getting a 941F, anybody here still using their BE2s in production? what have you done to the gun to make it shoot better than stock? I got rid of my Be2 and built another using the 941 .. was able to use a modified tanfo firing pin to fix my light strike issues. Link to comment Share on other sites More sharing options...
jondextan Posted September 24, 2016 Share Posted September 24, 2016 I was thinking to use it for production class, the SP-01 is around 20k pesos more than the 941F, maybe some polishing and a main spring/recoil spring change will make it good enough for local matches? Will you recommend it or should i look somewhere else? Link to comment Share on other sites More sharing options...
philippshen Posted September 29, 2016 Share Posted September 29, 2016 On 9/24/2016 at 7:19 AM, ogiebb said: I got rid of my Be2 and built another using the 941 .. was able to use a modified tanfo firing pin to fix my light strike issues. Did you use the small frame extended firing pin from Henning shop? Thx Link to comment Share on other sites More sharing options...
ogiebb Posted September 29, 2016 Author Share Posted September 29, 2016 7 minutes ago, philippshen said: Did you use the small frame extended firing pin from Henning shop? Thx I used a stock large frame firing pin I cut the tip and rounded until it cleared the breech face. a long henning will work well too and might be better since its lighter. Link to comment Share on other sites More sharing options...
philippshen Posted September 29, 2016 Share Posted September 29, 2016 Just now, ogiebb said: I used a stock large frame firing pin I cut the tip and rounded until it cleared the breech face. a long henning will work well too and might be better since its lighter. So, no need for modification if I use a henning small frame pin right? just drop it in? BTW, can I use an extended mag release from stock2 on the Jericho? Thx Link to comment Share on other sites More sharing options...
ogiebb Posted September 29, 2016 Author Share Posted September 29, 2016 2 hours ago, philippshen said: So, no need for modification if I use a henning small frame pin right? just drop it in? BTW, can I use an extended mag release from stock2 on the Jericho? Thx im not sure on the small frame FP.. I think that might be a tad short as the slides are different on the 941 and Tanfoglio. on the mag release yes its a direct drop in fit... but if you use a Tanfoglio as per rules you cannot mix and match parts as its an external mod.. the thing is I have a extended mag release from a 941 and an ext mag release from a Tanfo and I could not tell the difference. Link to comment Share on other sites More sharing options...
philippshen Posted September 30, 2016 Share Posted September 30, 2016 6 hours ago, ogiebb said: im not sure on the small frame FP.. I think that might be a tad short as the slides are different on the 941 and Tanfoglio. on the mag release yes its a direct drop in fit... but if you use a Tanfoglio as per rules you cannot mix and match parts as its an external mod.. the thing is I have a extended mag release from a 941 and an ext mag release from a Tanfo and I could not tell the difference. Thanks a lot, is there any way I can change the hammer pin from a roll pin to a solid pin? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now