DrLove Posted August 2, 2013 Share Posted August 2, 2013 folks, those of you using a Carver mount on Glocks/Xdms. Are you ever having issues of rounds bouncing off the mount or getting stuck under it? If so, how did you fix that? Link to comment Share on other sites More sharing options...
DrLove Posted August 2, 2013 Author Share Posted August 2, 2013 anyone? Link to comment Share on other sites More sharing options...
Iceman2733 Posted August 2, 2013 Share Posted August 2, 2013 I think this a common problem and part of the reason I think he recommends having the ejection port lowered. I know that is what I was told when I was looking at building an open glock Link to comment Share on other sites More sharing options...
Naka16 Posted August 3, 2013 Share Posted August 3, 2013 On my unfinished project xd 40 I have that exact problem. Will probably try to play with the ejector angle a little at a time. Haven't opened up the ejection port yet. Was also thinking of taking a little off of the bottom of the mount where the cases are getting stuck. Link to comment Share on other sites More sharing options...
Naka16 Posted August 3, 2013 Share Posted August 3, 2013 Btw, do you have a glock or xdm? Link to comment Share on other sites More sharing options...
BoyGlock Posted August 3, 2013 Share Posted August 3, 2013 I tried tuning all variables but still ended up w/ a jam from time to time. Guess its due to inconsistencies in 9 brass. I changed to the Hunter model w/c is a bit higher w/ more room for ejection. The problem went away for good. And no, it didnt cause any difficulty in my dot index to target. Link to comment Share on other sites More sharing options...
melissa5 Posted August 3, 2013 Share Posted August 3, 2013 Yep, you've got to have the ejection port lowered. Link to comment Share on other sites More sharing options...
EkuJustice Posted August 3, 2013 Share Posted August 3, 2013 Ya ejection port needs to be lowered on the verticle mounts. Link to comment Share on other sites More sharing options...
Iceman2733 Posted August 4, 2013 Share Posted August 4, 2013 Also to add I think some guys with the glocks run a 40 extractor. Suppose to have a different angle of where it ejects the case too Link to comment Share on other sites More sharing options...
practical_man Posted August 7, 2013 Share Posted August 7, 2013 Yep. With my XDm. Gave away the Carver mount and use the pistol for production Link to comment Share on other sites More sharing options...
canuk Posted August 7, 2013 Share Posted August 7, 2013 my coment is redundant but I lowered the ejection port on my glock with a dremmel, problem solved for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now