Dewberry Posted June 28, 2013 Share Posted June 28, 2013 I'm looking to stipple the back strap of my m&p that I use in competition. I just peeled some grip tape off it. The grip tape I used was some 2 inch wide tape that we put on the steps of ladders at work. It the most aggressive tape I could find. I have some pretty tough hands to the more aggressive the better for me. All of the grip minus the back strap is covered by the tape, I just can't get they tape to conform to the blackstrap. So I decided to stipple it. The problem is the few stippled guns I have held are not quite aggressive enough for me. So my question for y'all is what the best way to get the most aggressive stipple job possible? Can I make some kinda special tip or use a special technique? I'm not to worried about looks, just function. Thanks and Gig'em Dewberry Link to comment Share on other sites More sharing options...
pawe Posted June 28, 2013 Share Posted June 28, 2013 I used a soldering iron on my xdm 5.25 Soldering irons have different size tips too for your preference on how aggressive you want it to be. Link to comment Share on other sites More sharing options...
Agney5 Posted June 28, 2013 Share Posted June 28, 2013 I did a good friend of mines M&P with a wood burning kit I purchased at Lowes. It had a variety of tips and I was able to get a super aggressive texture on it. If you have soft hands undoubtedly to aggressive, I'll try getting some pictures posted of the kit and how the grip turned out. Sent from my DROID RAZR Link to comment Share on other sites More sharing options...
Dewberry Posted June 28, 2013 Author Share Posted June 28, 2013 Thanks for the helpful responses, I have just a few questions for y'all I used a soldering iron on my xdm 5.25 Soldering irons have different size tips too for your preference on how aggressive you want it to be. Do smaller or larger give you a more agressive texture? I would think larger equals rougher until you hit a certain point I did a good friend of mines M&P with a wood burning kit I purchased at Lowes. It had a variety of tips and I was able to get a super aggressive texture on it. If you have soft hands undoubtedly to aggressive, I'll try getting some pictures posted of the kit and how the grip turned out.Sent from my DROID RAZR What kinda tip did you use? If you get a chance to take pictures would you take a picture of the tip you used. Link to comment Share on other sites More sharing options...
blairmckenzie1 Posted June 28, 2013 Share Posted June 28, 2013 Bigger the tip, more aggressive. IMO. Take a look at Zev tech. They have some of the best stippling around. Its grippy but not rough. Link to comment Share on other sites More sharing options...
Bentsight Posted June 28, 2013 Share Posted June 28, 2013 I just mixed some black 2-part epoxy, applied a thin "skim coat" over the areas I wanted textured and sprinkled Black oxide sand blast media on it. Shake off the excess after drying and lightly file it for desired roughness. This process works very well on rounded and flat surfaces. Link to comment Share on other sites More sharing options...
Mliebs Posted June 28, 2013 Share Posted June 28, 2013 I just mixed some black 2-part epoxy, applied a thin "skim coat" over the areas I wanted textured and sprinkled Black oxide sand blast media on it. Shake off the excess after drying and lightly file it for desired roughness. This process works very well on rounded and flat surfaces. Good idea, i like it Link to comment Share on other sites More sharing options...
pawe Posted June 29, 2013 Share Posted June 29, 2013 Here's a picture of what a small size soldering tip looks like on your grip. Link to comment Share on other sites More sharing options...
Agney5 Posted June 29, 2013 Share Posted June 29, 2013 It isn't the prettiest, but man does it grab the hand. I'll try and get the head of the burner tomorrow. Sent from my DROID RAZR Link to comment Share on other sites More sharing options...
pushpullpete Posted June 29, 2013 Share Posted June 29, 2013 (edited) It isn't the prettiest, but man does it grab the hand. I'll try and get the head of the burner tomorrow. Sent from my DROID RAZR Not the prettiest, true. However, pretty don't help your control much. Grip does. Edited June 29, 2013 by pushpullpete Link to comment Share on other sites More sharing options...
Dewberry Posted June 29, 2013 Author Share Posted June 29, 2013 I just mixed some black 2-part epoxy, applied a thin "skim coat" over the areas I wanted textured and sprinkled Black oxide sand blast media on it. Shake off the excess after drying and lightly file it for desired roughness. This process works very well on rounded and flat surfaces. I'm really interested by this. It's a good idea. I think I'm going to try and stipple it tomorrow and if it doesn't work of if its not grippy enough I will probably sand it smooth and do this. Thanks for sharing the great idea Link to comment Share on other sites More sharing options...
practical_man Posted June 29, 2013 Share Posted June 29, 2013 Seeding iron. Grind tip big and to a square or polygon shape for more texture. Hope this helps. Link to comment Share on other sites More sharing options...
Ken_Bird Posted June 30, 2013 Share Posted June 30, 2013 Where do you find the Black Oxide sand? Does it come in different size grit or just one. I have a Zev lower the used Black Oxide on and I really do like it. Thanks Link to comment Share on other sites More sharing options...
Bentsight Posted June 30, 2013 Share Posted June 30, 2013 Where do you find the Black Oxide sand? Does it come in different size grit or just one. I have a Zev lower the used Black Oxide on and I really do like it. Thanks I found the products at Harbor Freight and at local welding supply companies. It is available in different sizes and if you want the "Bling" effect it was in multiple colors as well. Link to comment Share on other sites More sharing options...
Dewberry Posted June 30, 2013 Author Share Posted June 30, 2013 Well yesterday I grabbed one of the back straps I don't use and tried some different patterns. I found that the more messy the pattern looked the more aggressive the texture was. After placing with it for a while I had a pattern down that I liked, unfortunately it looked like something that had just been fed through a wood chipper. Lol so today I'm going to steal some sand blasting media from my dad sand blaster and give that a try. Based on looking at it earlier I think it's pretty fine media but I think it should provide plenty of traction. I'll let y'all know how it turns out. Link to comment Share on other sites More sharing options...
madmike283 Posted July 10, 2013 Share Posted July 10, 2013 (edited) I prefer "messy" to a certain pattern as well. I got a cheap wood burning kit from the craft store and dug in. I first used a tip like this one. It was good, but I wanted a little more aggressiveness. I decided to put this tip on and use the pointed end. It ended up like this... Edited July 10, 2013 by madmike283 Link to comment Share on other sites More sharing options...
madmike283 Posted July 10, 2013 Share Posted July 10, 2013 Wow those phone photos are pretty crappy. A not so close view... Link to comment Share on other sites More sharing options...
Dewberry Posted July 11, 2013 Author Share Posted July 11, 2013 Mad mike, that stippling looks awesome and very grippy. I might have to buy another back strap and try that. I ended up mixing up some 2 part epoxy and spreading it on my back strap and sprinkling blasting sand all over it a couple times. The sand is higher grit than the tape on the rest of the grip but it is still very high traction. I haven't live fired it yet but I Did some dry fire practice with it and I'm loving it so far. Thanks for the help guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now