thompsoncustom Posted March 16, 2013 Share Posted March 16, 2013 Just kind of wondering who's got the lowest trigger pull in a DA/SA gun and what your numbers are? If you don't run with it that's fine just as long as you confirmed your gun having that pull at one point. Link to comment Share on other sites More sharing options...
kneelingatlas Posted March 16, 2013 Share Posted March 16, 2013 I have a Jericho which runs about 2.5#/6.5#, but I heard Stuart got a 75 down around 2#/4#... Link to comment Share on other sites More sharing options...
thompsoncustom Posted March 16, 2013 Author Share Posted March 16, 2013 (edited) Ya I heard of a couple CZ's now around 2lb/4lb never heard of a sub 1 tho I think anything under 2lb is really pushing the limits. Edited March 16, 2013 by thompsoncustom Link to comment Share on other sites More sharing options...
eerw Posted March 17, 2013 Share Posted March 17, 2013 Lowest that runs? Or just lowest? Haha Link to comment Share on other sites More sharing options...
kneelingatlas Posted March 17, 2013 Share Posted March 17, 2013 I think if I tried hard enough I could get my TS under a pound, it's between 1-1.5 right now depending on the hammer spring. Link to comment Share on other sites More sharing options...
Neomet Posted March 17, 2013 Share Posted March 17, 2013 1.75/3.5. Shadow. Needless to say it only runs on Federals. Link to comment Share on other sites More sharing options...
thompsoncustom Posted March 17, 2013 Author Share Posted March 17, 2013 (edited) Lowest that runs? Or just lowest? Haha Lol ya has to run normally, no re cutting or sanding the hammer hooks under 100rd rounds or anything crazy like that 1.75/3.5 is very impressive and ya I would image no one under 2lb is running anything than Feds. Edited March 17, 2013 by thompsoncustom Link to comment Share on other sites More sharing options...
DownUnder Posted March 17, 2013 Share Posted March 17, 2013 I'm assuming that these mods include relaxing the tension on the trigger reset spring by lifting it from the front, toward the hammer. Doing that on its own can drop the single action trigger weight below 2 lb in a gun with 13 lb mainspring and 11 lb recoil spring. Link to comment Share on other sites More sharing options...
thompsoncustom Posted March 28, 2013 Author Share Posted March 28, 2013 What part of the trigger do you hook to measure the pull from? My CZ is down right now so I measured my Glock 17 and from the middle of the trigger it measures 6.50 and from the bottom of the trigger its 4.75lb I'm guessing it from the extra leverage so what is the correct way to measure it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now