Help with getting compensator on Match 10mm

[MarkR929]

targets4fun, did you find mount online?

[MarkR929]

Well, I finally got the Guide spring rod refitted to work properly and it looks really nice, now my next job(s) is to figure out colors and I'm going to try some Cerakote.

[Dugiv]

Here is my match all done. I loaded up some 10mm with 180gr fmj on *10.4 grains* (IIRC DONT USE) of blu dot and it shoots dramatically different. Before the comp I had 20lb recoil springs in it and it felt correctly sprung at that point but ive had to come down to 18lb now and 16lb would still be ok brass is landing a little close. Oh and the shock wave thats emitted from the 2 ports is incredible. It was literally blasting the acoustic tile above me to pieces, twas bringing down the house it was

With faster burning unique powder using 155gr bullets the compensator had less effect, still some help bringing the muzzle down but the heavier loads definitely felt more effected by the comp. Ill try to max load some 200gr with accurate No. 9 and see what happens. I only did a few of those before and the kick was excessive.

Edited September 12, 2013 by Dugiv

[bikerburgess]

For maximum effect run a light bullet (like a 135 or 155) with slow powder like Be Dot or no.9 that way you get the most gass on the comp.

Mike

[Nealio]

Or try Power Pistol. It meters a lot better than Blue Dot.

[Dugiv]

Or try Power Pistol. It meters a lot better than Blue Dot.

Ill have to try some of that. Lighter bullets an power pistol. How is the flash on power pistol? Blue dot is like a fire cracker.

[Nealio]

Or try Power Pistol. It meters a lot better than Blue Dot.

Ill have to try some of that. Lighter bullets an power pistol. How is the flash on power pistol? Blue dot is like a fire cracker.

Its flashy and boomy.. Good shock and awe effect..

[redman3410]

I have managed to put a barrel extention using  a interface fit and use a squeeze type compensator 

On a eaa 10mm witness-p

[Apolo]

Hey @kneelingatlas how's it going lol.