spb Posted February 18, 2011 Share Posted February 18, 2011 Looking to find some more 9x21 loads. I have a sheet that was posted by Jeff Maass back in 2001 so I thought I would see if anybody has anything new. Thanks in advance spb Link to comment Share on other sites More sharing options...
GrumpyOne Posted February 18, 2011 Share Posted February 18, 2011 (edited) 9x21 is pretty dated. Most everyone uses either 9mj or a 38 super variant, but there may be a few around. Try a 9x21 search on here, something should pop up. BTW, Jeff Maass is a member here on the forum, so do a search for him as well, he might be able to help... And, most importantly, Welcome to the forum! Here is one of Jeff's pages on the web... http://www.k8nd.com/ Edited February 18, 2011 by GrumpyOne Link to comment Share on other sites More sharing options...
Yardbird Posted February 18, 2011 Share Posted February 18, 2011 Don't know if you are looking for major or minor loads, but pretty much any load you find for 9x19 can be used in 9x21. Link to comment Share on other sites More sharing options...
noylj Posted February 18, 2011 Share Posted February 18, 2011 9x21 has two historical uses: 1) As a legal substitute for 9x19 in countries that will not let civilians use military calibers. Here, they tend to load short and the round is no more than a 9x19. 2) In the US action pistol area it was loaded long and hot. These are not SAAMI or European ordnance group approved. Link to comment Share on other sites More sharing options...
gng4life Posted February 18, 2011 Share Posted February 18, 2011 My first Open gun in 1997 was a 9x21. I had it re-barreled for 38Super after about 5 years, it was getting harder to find brass/load data/etc. You might want to think about having that done and using something more readily available like 38Super or 9mm Major. I thought I still had my old data but I can't find it. Good luck... Link to comment Share on other sites More sharing options...
jmnjoeyd1 Posted February 18, 2011 Share Posted February 18, 2011 "9x21 is pretty dated" Link to comment Share on other sites More sharing options...
eerw Posted February 18, 2011 Share Posted February 18, 2011 need to know what your OAL will be. many loads are loaded out to 38 super OAL or they are loaded short to 9x19 OAL. this will decide a lot on what powder charges to use. Link to comment Share on other sites More sharing options...
flack jacket Posted February 18, 2011 Share Posted February 18, 2011 My P9 at the time was 9x21. Loaded 9x19 length Used AA#7 130 or 135 FMJ by D&J Sorry I don't have any load data written down since 1992 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now