Nemesis Lead Posted October 18, 2010 Share Posted October 18, 2010 Has anyone run the SWSA Glock dry fire kit? My link Does it replicate the Glock trigger or is it junk? Also, are there other reset kits and are they any good? Link to comment Share on other sites More sharing options...
Jman Posted October 18, 2010 Share Posted October 18, 2010 Can't say if it's junk. I personally have no use for any "dry fire kit". Seriously, a little piece of paper shoved between the barrel hood and the frame works just fine for dry fire practice. Jim Link to comment Share on other sites More sharing options...
kevin c Posted October 18, 2010 Share Posted October 18, 2010 Can't say if it's junk. I personally have no use for any "dry fire kit". Seriously, a little piece of paper shoved between the barrel hood and the frame works just fine for dry fire practice. Jim I do this as well, though there isn't a "break" in the trigger with the paper "out of battery" method. Now, if this new kit actually can closely approximate the normal break in the trigger, I might consider it, but, if not, well, my piece of paper costs me nothing to use. Link to comment Share on other sites More sharing options...
Nemesis Lead Posted October 20, 2010 Author Share Posted October 20, 2010 Wow--either this kit is really new or it is junk. I figure if this thing were good people would be all over it. Really? No one has used this? Link to comment Share on other sites More sharing options...
JohnGaultsGun Posted October 20, 2010 Share Posted October 20, 2010 I use it and like it. It doesn't have the striker-break feeling to it but the pull weight is heavy enough for me to see if I'm pulling a shoot on something during dry fire. I have a dedicated frame I use for dry-fire with this kit installed. For me, it's close enough. Link to comment Share on other sites More sharing options...
Flashooter Posted November 24, 2010 Share Posted November 24, 2010 Can't say if it's junk. I personally have no use for any "dry fire kit". Seriously, a little piece of paper shoved between the barrel hood and the frame works just fine for dry fire practice. Jim Jman & Kevin C, I can't figure out how to position the paper. Do I place the paper between the hood and SLIDE or the hood and FRAME? Do I shove the paper with the gun assembled or do I remove the slide and barrel? I assume I cut the paper to the width of the hood, but how thick is the paper? I feel like an idiot but I can't figure it out. Thanx in advance! Link to comment Share on other sites More sharing options...
RangeHooligan Posted November 25, 2010 Share Posted November 25, 2010 Flashooter, the piece of folded paper/card stock will be slipped in where the breechface and the rear of the barrel hood contact each other. This keeps the action slightly out of battery so the striker spring is compressed when the trigger is pulled but the striker will not be released. I've found that using a thin piece of plastic, like the material the clasp for a loaf of bread is made of, works well. Just size one so it fits into the breechface and you're in business. RH Link to comment Share on other sites More sharing options...
Flashooter Posted November 25, 2010 Share Posted November 25, 2010 Flashooter, the piece of folded paper/card stock will be slipped in where the breechface and the rear of the barrel hood contact each other. This keeps the action slightly out of battery so the striker spring is compressed when the trigger is pulled but the striker will not be released. I've found that using a thin piece of plastic, like the material the clasp for a loaf of bread is made of, works well. Just size one so it fits into the breechface and you're in business. RH RangeHooligan, thanx for your detailed description, explanation and tip about the bread clasp! Even a caveman like me can understand it. I will definitely give this a try. Thanx for your help!! Link to comment Share on other sites More sharing options...
SeaTact Posted November 27, 2010 Share Posted November 27, 2010 I use it and like it. It doesn't have the striker-break feeling to it but the pull weight is heavy enough for me to see if I'm pulling a shoot on something during dry fire. I have a dedicated frame I use for dry-fire with this kit installed. For me, it's close enough. JGG-- is the kit any better than using the cardboard trick? I thought there was going to be something close to a striker-break. Link to comment Share on other sites More sharing options...
Flatland Shooter Posted November 27, 2010 Share Posted November 27, 2010 I found that my wife's VISA card was just the right thickness. Trim to fit and I not only get my dry fire practice in but save a few bucks to boot. Bill Link to comment Share on other sites More sharing options...
Duane Thomas Posted November 27, 2010 Share Posted November 27, 2010 You can also save a few bucks (in more ways than one) by cutting up your Visa card. Link to comment Share on other sites More sharing options...
Rodan Posted November 28, 2010 Share Posted November 28, 2010 That would be a great use for a VISA card lol Link to comment Share on other sites More sharing options...
SeaTact Posted December 2, 2010 Share Posted December 2, 2010 I just figured another alternative to the cardboard / credit card / breadloaf tag tip -- drop a snap cap directly through the chamber into the barrel, then slowly ride the slide closed. The extractor's claw will come to rest on the cap and the slide will remain out of battery. Link to comment Share on other sites More sharing options...
JohnGaultsGun Posted December 15, 2010 Share Posted December 15, 2010 I use it and like it. It doesn't have the striker-break feeling to it but the pull weight is heavy enough for me to see if I'm pulling a shoot on something during dry fire. I have a dedicated frame I use for dry-fire with this kit installed. For me, it's close enough. JGG-- is the kit any better than using the cardboard trick? I thought there was going to be something close to a striker-break. I've never used the cardboard trick so I can't give you a comparison. There is something that is out but it costs hundreds of $$$. It's one of the glock laser training pistols with the resetting trigger. Very much like the glock trigger. But they are not cheap. I forgot what they are called. Someone had it at the range and I tried it out. This model came with 2 lasers ... one green and one red. The red laser shows where your gun is aiming. When you squeeze the trigger, the green one snaps on and shows you where the shot broke. Seemed very nice if you can afford it. Link to comment Share on other sites More sharing options...
1760yds Posted June 22, 2011 Share Posted June 22, 2011 Has anyone run the SWSA Glock dry fire kit? Does it replicate the Glock trigger or is it junk? Also, are there other reset kits and are they any good? I know this post is old but somebody has to have tried this by now. Anybody else have anything to say about these kits? Dillon Precision is selling them now. Do they feel like a real Glock trigger? Link to comment Share on other sites More sharing options...
Delta Mike Posted June 22, 2011 Share Posted June 22, 2011 I have one and I like it. It replicates a stock Glock trigger pull with a more realistic feel than the cardboard trick, including the trigger reset. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now