newshooter

Yes i was talking about the precision black bullets not the delta precision. Thanks for the super quick reply!!! i have seen you post to almost all of the questions that i have ever posted/asked. Thanks again. Saw that you are planning on making it down to the single stack match here in Pharr texas. looking forward to meeting you and hopefully making it up to CC for a match or two

Hello i tried to do a search and didn't come up with much luck. I was wondering if there were any problems with shooting precision bullets in an open gun at 175pf's leading etc.. I am planning on putting an order in for some 40 caliber bullets and wanted to know on the 38super since they are cheaper than your FMJ's

Hello to all and merry Christmas to every one! I just opened up my present which was a case feeder for a 650. I was wondering on how the clutch system works on it. Is there any adjusting that needs to be done or it should be set at the factory already. Thanks for taking the time to reading this post just another question i had. Joey

here is my new my space site www.myspace.com/jstang66

Was strolling through some web sites and come up on this one. I didnt know where i could post this so every one could see this. What class would you think this pistol would fall under?? haha

I wish i could get a 1050 only thing i see is that the caliber conversions are way more pricier if you plan to load more than one caliber and want to have complete tool heads and shell plates. I currently have a 650 and happy with it maybe for christmas i will get a casefeeder for it and it is about half the price of a 1050. I guess if i had the money i would have gotten a 1050.

Hello at the moment i am using a kimber conversion on my kimber 1911 it seems to work really well when using CCI mini mag ammo and plenty of oil. I have had my eye on a ruger and would like to put a Tactical solution barrel on it. A lot of the people here locally like to shoot rugers. The TS stuff is really nice looking also.

that helps to keep you in line with the front sight. If you are not lined up properly, the sight is not completely visable. Mushrooming the front of the optic rod does not help secure the rod becausee it is the rear of the rod that gets the most "hammer" from the recoil. It is best to use some superglue to secure the rod to the sight. That way you don't have to mushroom the rear or sight end of the rod. You don't want a big blob staring at you, just a dot. When super gluing a rod in does it leave a mess when you replace it? do you have to find a small enough drill bit just to clean out the hole for the new rod that you are going to put into it?? Also i was wondering when i super glue some stuff around the house some of it tends to turn white will this happen with the F/O rod also?? Thanks for the Websites for the F/O rod thats a deal compared to the local gun shop that wants 9 dollars for a 5 or 6 inch peace.

How many of you shoot moly indoors i was wondering how much smoke you get from them???

Which powders would you list on a poll for .40? what is most common out of the bunch Titegroup, Vhita????? all i have used so far is TG

Thanks for taking the time to read my post and taking my poll. I can see that the majority of the shooters like to use 180 grain bullets that are FMJ/JHP. I my self use 180s but that what a friend had for me to use at this point in time i am using what ever i can get my hands on haha. I think im going to try some 200 grain next

I was wondering where you find these 3ft. peace's of FO rod. I am starting to run low on red and other colors which i have not tried cause i only have out 3 inches of yellow and green. I was trying to find some places that sale this stuff.

Mine are around .422 it has been working good for me. I remember asking question while back about crimping a lot of people say as long as its not tighter than .420 So i put mine around .422 Hope this helps some.

Hello everyone I was just curious in what is the most popular bullet weight that everyone use's in there guns. Also wanted to try making a poll at the same time Thanks for taking the time to looking at the post Joey

Hello i think i had a similar problem as you did. I asked the same question a while back and just found where i posted up my question with a few pictures. Take a look at it and see if your brass looked similar to what mine was doing. Hope this helps you some. Heres the link to my question on sizing http://www.brianenos.com/forums/index.php?...38+super+sizing Joey

Soooouuuttthhh texas RGV to be exact are weather here is always hott except for next few days it will be in the 70's which is a break for us down here our winter down here seems like a week long haha then back into the hott weather. Normal temp. down here is in the 90's and sunny. So i was kind of leading toward to leaving the gun alone but now I am back to thinking of H.C. it since it is a good protection/lubing to the gun. I guess if I spent 1500 on the gun might as well invest in some coating to help it last longer

HAHA you know i really don't know why. first i guess it looks nicer and second blue shows wear quickly i guess it is just cosmetic. Maybe i will just leave it alone as it is and mess with it later on when the $ isn't to big of a problem haha. My way of thinking at this moment is buy things now before i have bills later. But i think i will hold off on the chroming there are more important things i need at the moment like LEAD haha i can't seem to ever have enough. Thanks for the quick replies everyone

I did a search and i couldn't find any thing i am thinking about sending my Edge off to get hard chromed and to hard chrome the pistol including the barrel is around 210 and also stated that if you don't hard chrome the barrel its 180 dollars. I was wondering if there is any reason/advantages to having a barrel hard chromed. I can sure use the extra thirty dollars on primers ammo powder etc. haha i can barely afford this addicting sport because of not having a job "college student with ours that wont let me work" So i was just wondering why to hard chrome a barrel or not. Thanks for taking the time to read this Joey

I have heard of some swat teams running drills shooting compress laundry detergent bullets at each other. Any one heard of this? was wondering if there is such thing as that. I bet they would give a good bruise getting it. I think the used paintball mask's to protect there faces also. No idea if that is what they used any of you every heard or seen any of these so called compressed detergent bullets???

I have been looking around for the same. Every one i shoot with here locally is telling me that the blade tech DOH is one of the best SS holsters out. I my self am not to sure cause i have not tried one or bought one yet planning on it becoming a Christmas gift haha hopefully. Time will tell if not i will be purchasing one my self.

Thanks for taking responding and clearing that up for me. I have the 771s for my SS and run the 773 double stack for my sti. I wasnt aware that they made771 in double i figured 771 ment it was for a single stack magazine. O well now i know a little more Thanks Joe W. Joey

This is a little off topic but the Cmore is what you all are talking about sort of in this post i was wondering how do you all clean your lenses? what do you use??? curious thanks for the time Joey

i have a Set of 771 mag pouches for single stack which were tight at first i just left my mags in them all the time and had the screws loose on them they have become a lot looser now. I also have the 773 mag pouches i was getting confused cause are the safariland 773 mag pouches for your double stack magazines?? and the 771 pouches for your single stack magazines.

Hello i have a quick question i have a kimber 22lr conver. and i was wondering if i could use it on my 2011 limited. Where would i find mags to fit the double stack? i emailed marvel asked them if there magazines would work they told me they would not. i was wondering if they were just saying that so i could buy a whole other conversion. Does any know of any 22lr magazines that will work in a kimber conver. on a 2011??

Hello every one i was wondering how come you never really hear much about sig guns in uspsa to me all i see are springfield XDs and glocks. I was curious in why sig isn't to much around i thought they were decent pistols one questions that i had back in my mind. haha another reason im asking is because i have a sig 226. That i would possibly use for production only problem is it has fixed sights