Scott Steele

yep, i do the exact.

Bayou, less powder to make MPF. Never had an issue, I do chamber check every round.

Congratulations!That's a nice pistol.

Same thing happened to me. STI must have packaged it wrong.

I thought those type dents were from the brass deflector on most uppers.

Very nice Chuck. Looks like some time went into that.

+1

I have the newer model. No problems.

+1 Sarge, you know you have one you prefer. Go with it.

Yay, I can post from my phone again. ~3 months

Test

http://www.youtube.com/watch?v=jkm1i2o6Ri8

Search "Enos" and it will show up as Brian's forum.But it still won't work, hasn't worked since November for me.

Tapacrap

Best person to answer those questions is JP. They know their rifles. Congratulations on getting a great rifle. I have a heat sink simply because I wanted one.

Is there a little bit of space on the bottom side? It seems like the picture with the executive fits much cleaner. The frame you see that has a gap is a newer frame with a relief cut for a slide stop.It does look cleaner with the older frame. Scott

I think if .3" stroke is added to the slide by extending the frame rail guide, then .3" needs to be removed from the back side of the recoil plug tunnel. If this is done, then the only way to hide the .3" removed from the tunnel is to use a long dust cover frame and cut it back from the front just to hide the gap. If you extend the rail guide and don't cut the recoil plug tunnel you are not getting the "stroke".

Yep, me too. It acts like its frozen on since Dec 9.

Who is only using the RT 1200B to fully size their .223 brass along with trimming? If you use a sizing die before the RT 1200B please tell me why? I plan to use a universal decapping die in station 1, Rt 1200B in station 3.

Rocky, go after Blue Bell ice cream.

Thanks for this information. Tell me when its best to do neck expansion. Because I was looking at putting in station 1 - Dillon FL size/deprime/neck expander for .223 or Redding equivalent. 2 - GS custom primer pocket swage 3 - Dillon rapid trim 1200B for .223 5 - Lyman neck expander M die. Sure seems to be a lot of neck expanding. Am I missing something? On the load head 1 - Dillon universal deprimer 2 - primer/powder 3 - powder check 4 - Dillon bullet seater or Redding equivalent. 5 - Dillon tapper crimp or Redding equivalent.

The manifold on the Dillon trimmer is large enough in diameter that it prevents the ability of installing dies into a 650 tool head in adjacent stations. So you can put the trimmer at 3 and have dies in one and 5 but 2 and 4 are blocked. You will also need to make or modify the front tool head retaining pin to use the trimmer in #3. Thanks for this information.

What neck resizer at station four? Tell me a name brand and model. Thanks Scott

Nope

Call Fords in Florida as an option.