ER_STL Posted March 12, 2009 Share Posted March 12, 2009 I'm about 75% of the way through my (first) reloading bench when I started to realize that it's going to be too short for me. I followed this design. The frame is done so replacing the legs with longer boards would be a hassle. Has anyone here tried to build on to the legs of a bench to make it taller? If so, how did you do it? I'm considering cutting 4 inch "extensions" and attaching them to the bottom of the legs and connecting them with yet another, similar piece of wood. I'm even considering pieces on two of the four sides of each leg to ensure it's strong enough. Any ideas? Link to comment Share on other sites More sharing options...
steel1212 Posted March 12, 2009 Share Posted March 12, 2009 I'm about 75% of the way through my (first) reloading bench when I started to realize that it's going to be too short for me. I followed this design.The frame is done so replacing the legs with longer boards would be a hassle. Has anyone here tried to build on to the legs of a bench to make it taller? If so, how did you do it? I'm considering cutting 4 inch "extensions" and attaching them to the bottom of the legs and connecting them with yet another, similar piece of wood. I'm even considering pieces on two of the four sides of each leg to ensure it's strong enough. Any ideas? How about build it on top of another low shelf? Link to comment Share on other sites More sharing options...
Flexmoney Posted March 12, 2009 Share Posted March 12, 2009 Just get the Strong Mount to go with your Dillon? Link to comment Share on other sites More sharing options...
joecefus Posted March 12, 2009 Share Posted March 12, 2009 (edited) hi! you mentioned adding a 4" extension to each leg. think about doing it this way if you need 4 more inches. adding a 4" extension to each leg would realy be a pain for you plus it would look funny an would have a chance of being unstable. i would just run a 4X4 from front to back on each leg.or maybe i should say side this would be much more stable an would look like you ment for it to be this way from the start. this would be much more stable also. i would much rather be lucky than good. an you should always be able to fix a f@@kup with out it being noticed... from an old boss.! Edited March 12, 2009 by joecefus Link to comment Share on other sites More sharing options...
h2osport Posted March 12, 2009 Share Posted March 12, 2009 If it was mine, I would instal new legs. The cost in time and materials will pale in comparison to my frustration everytime I looked at the extensions. You will probably be using this bench for many years, so the little amount of lost time and money now will pay off in the long run. I have made similar mistakes, and it has always been faster to back up and fix the mistakes, than to try and modify the design. Just my opinion Randy Link to comment Share on other sites More sharing options...
Greg Bell Posted March 12, 2009 Share Posted March 12, 2009 You could cut the existing legs off at the bottom of your shelf, then "sister" full length replacements right along side. It would be solid and not look as dorky as extensions. Link to comment Share on other sites More sharing options...
uscbigdawg Posted March 12, 2009 Share Posted March 12, 2009 Just get the Strong Mount to go with your Dillon? This would be my solution. Rich Link to comment Share on other sites More sharing options...
ER_STL Posted March 12, 2009 Author Share Posted March 12, 2009 (edited) Thanks for the responses. After thinking it over I'm going to replace the legs with longer ones. I considered going with the Strong Mount for the press but I'd rather have the entire bench raised up. I'll post pictures when I have it finished. Edited March 12, 2009 by ER_STL Link to comment Share on other sites More sharing options...
lynn jones Posted March 12, 2009 Share Posted March 12, 2009 Thanks for the responses. After thinking it over I'm going to replace the legs with longer ones. I considered going with the Strong Mount for the press but I'd rather have the entire bench raised up.I'll post pictures when I have it finished. try this, it will save you some time: Link to comment Share on other sites More sharing options...
bgary Posted March 12, 2009 Share Posted March 12, 2009 i would just run a 4X4 from front to back on each leg.or maybe i should say side +1. Kinda like a "skid" on each end. At the very least, it would let you try out the new height without having to tear it all apart and rebuild it first. Link to comment Share on other sites More sharing options...
uscbigdawg Posted March 12, 2009 Share Posted March 12, 2009 That would be a good solution that lynn jones suggested. Just sister a 2x4 to tie the short leg to a 4" extension piece. Rich Link to comment Share on other sites More sharing options...
icecold29 Posted March 15, 2009 Share Posted March 15, 2009 If you just add the 4x4's, drill holes in the bottom and put in T-bolts that are tapped for a set of refridgerator legs. This will give you about an inch of final adjustment, also makes it easy to level on concrete. I built two benches together and it cost about $10 per bench. Link to comment Share on other sites More sharing options...
boz1911 Posted March 15, 2009 Share Posted March 15, 2009 Thanks for the responses. After thinking it over I'm going to replace the legs with longer ones. I considered going with the Strong Mount for the press but I'd rather have the entire bench raised up.I'll post pictures when I have it finished. That's what I would do. You can use the "old" legs for shelf and worktop supports. Link to comment Share on other sites More sharing options...
sirveyr Posted March 19, 2009 Share Posted March 19, 2009 I think the cheapest and easiest option is just to crouch down or hunch your back a little bit. It burns the quads at first, but you'll get used to it. Link to comment Share on other sites More sharing options...
chirpy Posted March 19, 2009 Share Posted March 19, 2009 Think about building a frame of 2 X 4's on edge and cradeling the whole thing inside it. A 2 X 4 isn't exactly 4" but close. Maybe add adjustable legs or stubby legs. FWIW Richard Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now