Filishooter Posted December 8, 2008 Share Posted December 8, 2008 Stats: Local USPSA Match: Titusville FL B Class Production (would like to move up to A!) HF 6.6293 TIME: 19.61 POINTS: 130 (out of 140) http://www.youtube.com/watch?v=CrQVUBwmsm4 I know...I missed the first shot off the draw! Any other advice would be appreciated! Thanks, Andy Link to comment Share on other sites More sharing options...
HoMiE Posted December 8, 2008 Share Posted December 8, 2008 Looked good, just at first position you seem to move/shuffle your feet quite a bit. Link to comment Share on other sites More sharing options...
PINMAN44 Posted December 8, 2008 Share Posted December 8, 2008 I liked it. You flow well. Link to comment Share on other sites More sharing options...
shooterbenedetto Posted December 8, 2008 Share Posted December 8, 2008 You lost time on the first shot! Try not making any mistakes. Otherwise, your movement is good..need better hits. Great looking video and stage! Link to comment Share on other sites More sharing options...
Jake Di Vita Posted December 8, 2008 Share Posted December 8, 2008 Don't have much time - but at a glance, the only glaring issue was in the first shooting position, you had to shuffle your feet in order to engage all the targets. Make sure you get all the targets within your stance when setting up. Link to comment Share on other sites More sharing options...
taco101 Posted December 9, 2008 Share Posted December 9, 2008 I see your problem. You are holding your gun in the wrong hand. Your movement looked quick. Nice run. Link to comment Share on other sites More sharing options...
Filishooter Posted December 9, 2008 Author Share Posted December 9, 2008 Thanks, I'm working on getting my points! I've gotten better but its an uphill battle. Actually, I think the way that this stage was setup, favored a lefty. Going right first exposed all the center targets that you couldn't see from the left side of the bianchi barricade. I'll work on shooting wide targets from the same position. Would you recommend shooting that first position stationary, lining up to the middle and swinging through with no footwork shifting? That will take some work for me...thanks just what I was looking for. Link to comment Share on other sites More sharing options...
Jake Di Vita Posted December 9, 2008 Share Posted December 9, 2008 Just make sure when you set up for an array that if you drew two imaginary lines from heel to toe to berm - all targets you are shooting from that position are within those two lines. Link to comment Share on other sites More sharing options...
Ron Ankeny Posted December 9, 2008 Share Posted December 9, 2008 Are you sure you shot the second array in the most efficient manner? I wasn't there, but I am not certain I would have shot it the same way. Link to comment Share on other sites More sharing options...
Filishooter Posted December 9, 2008 Author Share Posted December 9, 2008 Are you sure you shot the second array in the most efficient manner? I wasn't there, but I am not certain I would have shot it the same way. No, I'm not sure...thats why I'm asking! I have tried it other ways (on similar stages and other days). Starting right to left and also going in deep and shooting left to right. Right now I can't say one is faster than the other. But I do notice that different ways of engagement can give different results. I usually would go right to left shooting the first target I see going in so my last target has me lined up for the exit to the left but it felt a little tight on walkthrough. Seeing it in video, I did have space to do it that way but I already had a plan in my head. I chose to leave the far right target for last so I could shoot it on the move out of position. Right now I'm keeping it flexible and its kind of experimentation for me. I don't really have a set way that I'm always going to engage targets a certain way. Link to comment Share on other sites More sharing options...
Filishooter Posted December 9, 2008 Author Share Posted December 9, 2008 Just make sure when you set up for an array that if you drew two imaginary lines from heel to toe to berm - all targets you are shooting from that position are within those two lines. Got it, thanks. Link to comment Share on other sites More sharing options...
FLL1911 Posted December 9, 2008 Share Posted December 9, 2008 What I learned (and still learning) from A and M shooter from my local club is that your body should by leaning towards the next position as you fire and follow-through the last shot in the current position, actually starting moving to the next position (also mentioned by Saul Kirsch in the “Master Class” video). It looks like you where completely stand still on the last shot on position one. Was the last target a steel and where you waiting to see if it fail? Link to comment Share on other sites More sharing options...
Filishooter Posted December 9, 2008 Author Share Posted December 9, 2008 (edited) What I learned (and still learning) from A and M shooter from my local club is that your body should by leaning towards the next position as you fire and follow-through the last shot in the current position, actually starting moving to the next position (also mentioned by Saul Kirsch in the “Master Class” video). It looks like you where completely stand still on the last shot on position one. Was the last target a steel and where you waiting to see if it fail? The last target was paper about 30 yards downrange across the bay. It seemed like a difficult shot for me as it was cross range (reduced A zone perspective) and the distance. It was an easier shot from position 3 but then I would have had to do a standing reload. Hopefully as I improve I'll be able to extend my ranges of where I can shoot on the move and with a stationary weight shift, but for my current ability I felt that I had to be as stable as I could be in my platform and follow through to get my As. I do try to get a head-start like you mention on closer open targets, so the seed is being planted, but I just didn't have the confidence yet on a shot of that difficulty. I did see other M and GM shooters do it the way you prescribe though. I'm just not there yet! Thanks, Andy Edited December 9, 2008 by Filishooter Link to comment Share on other sites More sharing options...
FLL1911 Posted December 9, 2008 Share Posted December 9, 2008 Andy, 30 yards is a long shot, and probable I would like to be as still a could be, but far from that, most of the targets on an average stage design are not that far. What I learned very soon was that is quite easy to lean toward any side while shooting (still with both feet on the ground) without loosing accuracy. It is like there is a barricade I have to lean over to get the sight picture. The point is to break the inertia of the body weight just before start moving. What is still not easy for me is to actually start moving as soon the last shot breaks - sometimes it starts a little early, sometimes a little late. This and other things are my next steps for improvement. Not there yet, too. Link to comment Share on other sites More sharing options...
Filishooter Posted December 9, 2008 Author Share Posted December 9, 2008 Andy, What is still not easy for me is to actually start moving as soon the last shot breaks - sometimes it starts a little early, sometimes a little late. I hear you brother!...I've pulled many a shot off target leaving (or getting ready to leave) a position too early. I seem to be able to pull this off better on close to medium range targets. It's the long range and close hoser targets that I tend to start pulling shots. I think as long as we are aware of it and keep at it we'll eventually get it! Link to comment Share on other sites More sharing options...
Cy Soto Posted February 2, 2009 Share Posted February 2, 2009 I can't offer a critique other than to say that it looks good to me but, on a VERY DIFFERENT subject... With the amount of smoke being produced I need to assume that you are shooting lead bullets. What brand of powder are you using? And, have you switched to a "less smoky" powder? Link to comment Share on other sites More sharing options...
Filishooter Posted March 6, 2009 Author Share Posted March 6, 2009 (edited) I can't offer a critique other than to say that it looks good to me but, on a VERY DIFFERENT subject... With the amount of smoke being produced I need to assume that you are shooting lead bullets. What brand of powder are you using? And, have you switched to a "less smoky" powder? Thanks, yes, I'm shooting 125gr LRN from a local caster with 3.5gr of Clays. Makes around 1080fps. Best lead load I have found so far, but if you have any suggestions on powder I'd be willing to try it! I do have other loads using Precision, Berrys or MGs... I just use the cheap lead loads for local matches. Edited March 6, 2009 by Filishooter Link to comment Share on other sites More sharing options...
kamikaze1a Posted March 14, 2009 Share Posted March 14, 2009 I'm kind of amazed to hear that you load Clays because I find it less smoky than most. I can tell you that BE would be even MORE smoky...it could be the lube. Is the lube Brown? Alox is Brown and creates more smoke than most other lubes but leaves your barrel clean and shiny... Link to comment Share on other sites More sharing options...
Cy Soto Posted March 19, 2009 Share Posted March 19, 2009 I agree, it could be the lube because I have never had trouble with CLAYS being that smoky. For a moment I thought you were going to tell me that was Titegroup because that is about as much smoke as I was having with TG and lead (it kept the bees away). <) Though I haven't tried it myself, some say that SOLO 1000 or WST is the way to go with lead. Link to comment Share on other sites More sharing options...
Filishooter Posted March 19, 2009 Author Share Posted March 19, 2009 The lube is clear, not brown. Not sure what it is? I buy them from a local caster. Do you think I could tumble the lube off before loading to reduce the smoke? Also, I notice a lot more smoke in the early morning than in the afternoon, especial when shooting into the sun! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now