Harmon Posted April 19, 2008 Share Posted April 19, 2008 post your time/hits and class i find this one really gets your trigger finger relaxed. my results: COLD Glock 21 comp-tac kydex holster Limted master 2.27 seconds -1pt felt sloppy on the draw at 1.10 and the last shot was a charlie. after two runs getting increasingly faster, i managed a 2.06 run, clean. there were four .13 splits consecutive. the rest were .15s or less. kinda fun watching the sight bounce up and down in the A-zone like that...and those .13 splits sound like the gun doubled....alot. anyone get it under 2.0 with an iron sighted gun and still shoot clean? Harmon Link to comment Share on other sites More sharing options...
ChrisStock Posted April 28, 2008 Share Posted April 28, 2008 Hmmmmm 8 shots vs. 5 I may toy with it tomorrow with my M&P .40 LTD pistola. I have a hard enough time controlling 5 shots that fast with the lightweight frame it has, so this should be a challenge. I can hit 1's pretty consistent cold to get it rolling, but after that, it tends to go downhill at a a quick rate. I'll let you know tomorrow PM. Link to comment Share on other sites More sharing options...
boba Posted April 29, 2008 Share Posted April 29, 2008 post your time/hits and classi find this one really gets your trigger finger relaxed. my results: COLD Glock 21 comp-tac kydex holster Limted master 2.27 seconds -1pt felt sloppy on the draw at 1.10 and the last shot was a charlie. after two runs getting increasingly faster, i managed a 2.06 run, clean. there were four .13 splits consecutive. the rest were .15s or less. kinda fun watching the sight bounce up and down in the A-zone like that...and those .13 splits sound like the gun doubled....alot. anyone get it under 2.0 with an iron sighted gun and still shoot clean? Harmon Harmon is this done by shooting at a single target or multiple. I ask because I have been practicing with my 22 pistol at 21 feet with 4 targets....2 shots at each. I don't own a timer yet but I did video tape so I suppose I could guess...however I am sure I am over 2 seconds Link to comment Share on other sites More sharing options...
kgunz11 Posted April 29, 2008 Share Posted April 29, 2008 I thought the Bill Drill was 6 rounds? Link to comment Share on other sites More sharing options...
JThompson Posted April 29, 2008 Share Posted April 29, 2008 I thought the Bill Drill was 6 rounds? It is... he's just bragging. Link to comment Share on other sites More sharing options...
Harmon Posted May 2, 2008 Author Share Posted May 2, 2008 (edited) still cant get it under 2.0 clean. i may dust off my open gun and try that, i may be able to get some more accuracy out of it. im going to try this again tomorrow and see( with the glock 21) i just have to load some more 45 ammo. Brian Enos claimed he has done 18 round bill drills if i remember correctly(from his book) Edited May 2, 2008 by Harmon Link to comment Share on other sites More sharing options...
Flexmoney Posted May 2, 2008 Share Posted May 2, 2008 If you are running 0.13-0.15 splits, then I'd look at pulling time off the draw. Link to comment Share on other sites More sharing options...
Harmon Posted May 4, 2008 Author Share Posted May 4, 2008 for some reason, i shave time off the draw, my splits slow down i can get it under two seconds, but i give up the alpha on the draw.... with gas, bullets, and primers so expensive, looks like i will just play with this from time to time as you learn nothing more doing this, vs a real bill drill. anyone else try it? Harmon Link to comment Share on other sites More sharing options...
sargenv Posted May 5, 2008 Share Posted May 5, 2008 Hmm.. today I did an 8 round bill drill with a 627 loaded to minor in 2.93 seconds.. All alphas. Not too bad for a round gun shooter Link to comment Share on other sites More sharing options...
JThompson Posted May 5, 2008 Share Posted May 5, 2008 Hmm.. today I did an 8 round bill drill with a 627 loaded to minor in 2.93 seconds.. All alphas.Not too bad for a round gun shooter I'd say that's a good run for me with a bottom feeder. Nice job Link to comment Share on other sites More sharing options...
want2race Posted July 1, 2008 Share Posted July 1, 2008 I wish I would have reviewed the shots. I shot a 15 round bill drill in 5.96 with a plain jane single stack. I'll give this one a shot next time out. Doing the math, I "shouldn't" be able to get under 2. My splits are .16 to .18 and my consistant draws are .95-1.05. 2.3 is where I the math puts me at. That means a sub 2 is a good personal goal. Should be fun. If I calculate my fastest draw from sunday (.78), then I can hit 1.98 with the same trigger speed. Hmmmm. Link to comment Share on other sites More sharing options...
SharonAnne9x23 Posted July 1, 2008 Share Posted July 1, 2008 I think BEs 18 rd Bill Drill was in 3 seconds. Need to check THE BOOK. Link to comment Share on other sites More sharing options...
want2race Posted July 1, 2008 Share Posted July 1, 2008 That would be pretty cool if there was a reload involved. Link to comment Share on other sites More sharing options...
Kingman Posted July 1, 2008 Share Posted July 1, 2008 3 seconds 18 rd bill drill, that is impressive. Link to comment Share on other sites More sharing options...
Harmon Posted August 2, 2008 Author Share Posted August 2, 2008 I did it in with my open gun today Open glock 40 cal 160 pf ammo with cast bullets 8 A's in 1.98 seconds. Stupid WST being inversely temp sensitive. Harmon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now