CC3D Posted March 3, 2023 Share Posted March 3, 2023 Does anybody have a SRO slide mounted to their TSO that can share pictures? Looking into possibilities for LO with my TSO. If you have pictures please post them here! Link to comment Share on other sites More sharing options...
Timido Posted March 10, 2023 Share Posted March 10, 2023 Just got an EGW mount here is the dovetail mount behind the frame mount on Czechmate TS. This is an option for you . I will let you know how it works out. Link to comment Share on other sites More sharing options...
CC3D Posted March 11, 2023 Author Share Posted March 11, 2023 Nice. Have my eye on this one for a temporary solution while the division is provisional. Would love to see it once the SRO is mounted! Link to comment Share on other sites More sharing options...
ohsevenflhx Posted March 11, 2023 Share Posted March 11, 2023 I just mounted the EGW plate for a Burris FF3 on my TS today. The EGW needed a little filing to fit in the dovetail. I still needed an arbor press to get it in. The EGW sits pretty low. I'll sight it in tomorrow. Link to comment Share on other sites More sharing options...
bravofox Posted March 11, 2023 Share Posted March 11, 2023 I would keep a really close eye on that mount, I had one on my P320 that failed after about 50 rounds. the dovetail portion of the mount deformed and my optic almost fell off the gun. Link to comment Share on other sites More sharing options...
CC3D Posted March 11, 2023 Author Share Posted March 11, 2023 12 hours ago, ohsevenflhx said: I just mounted the EGW plate for a Burris FF3 on my TS today. The EGW needed a little filing to fit in the dovetail. I still needed an arbor press to get it in. The EGW sits pretty low. I'll sight it in tomorrow. Let us know how it works out! Link to comment Share on other sites More sharing options...
ohsevenflhx Posted March 11, 2023 Share Posted March 11, 2023 I put 200 rounds through it this morning. Everything went well. No problems with the plate or the Burris FF3. I normally use Trijicon SRO red dot but I'm experimenting with my TS that been sitting in the gun safe for 3 years. The Burris FF3 has been in the box for 2 years also. The EGW plate was 49.99. Playing with Provisional Limited Optics in 40S&W. Link to comment Share on other sites More sharing options...
Timido Posted March 11, 2023 Share Posted March 11, 2023 13 hours ago, ohsevenflhx said: I just mounted the EGW plate for a Burris FF3 on my TS today. The EGW needed a little filing to fit in the dovetail. I still needed an arbor press to get it in. The EGW sits pretty low. I'll sight it in tomorrow. Did you just need to file fit the 60° cut on the adapter. I started to test fit mine and it will need fitted a little Link to comment Share on other sites More sharing options...
ohsevenflhx Posted March 11, 2023 Share Posted March 11, 2023 I filed the flat part of the dovetail until it slid in about 1/3 to 1/2 way then I pressed it in the rest of the way with my arbor press. I started the plate from the left side of the slide, if it makes a difference I don't know. Link to comment Share on other sites More sharing options...
ohsevenflhx Posted March 11, 2023 Share Posted March 11, 2023 Link to comment Share on other sites More sharing options...
ohsevenflhx Posted March 11, 2023 Share Posted March 11, 2023 (edited) x Edited March 11, 2023 by ohsevenflhx Link to comment Share on other sites More sharing options...
CC3D Posted March 11, 2023 Author Share Posted March 11, 2023 Nice. Seems to sit really far back on the slide Link to comment Share on other sites More sharing options...
Neomet Posted March 12, 2023 Share Posted March 12, 2023 SRO on an original TS from CZC. Link to comment Share on other sites More sharing options...
asierra350 Posted March 13, 2023 Share Posted March 13, 2023 Neomet, who did your slide cuts? Link to comment Share on other sites More sharing options...
CC3D Posted March 13, 2023 Author Share Posted March 13, 2023 51 minutes ago, asierra350 said: Neomet, who did your slide cuts? CZC per his post. Seems to be the best option 7 hours ago, Neomet said: SRO on an original TS from CZC. Any issues with the set up? Link to comment Share on other sites More sharing options...
Neomet Posted March 13, 2023 Share Posted March 13, 2023 Sorry, I was unclear there. The TS was from CZC. The slide and dustcover cuts were from a guy who is out of business now. Springer Precision did the optics cut/plate for the SRO. Just got it back from Springer and it has worked fantastic the one time I was able to get to the range. More rounds needed down the pipe to give a reliability report but Springer's stuff has always been top notch in my experience. Link to comment Share on other sites More sharing options...
asierra350 Posted March 13, 2023 Share Posted March 13, 2023 Ok thanks, I’m trying to find someone to do some slide panel/lightening cuts on a gen 1 TSO Link to comment Share on other sites More sharing options...
CC3D Posted March 13, 2023 Author Share Posted March 13, 2023 12 hours ago, Neomet said: Sorry, I was unclear there. The TS was from CZC. The slide and dustcover cuts were from a guy who is out of business now. Springer Precision did the optics cut/plate for the SRO. Just got it back from Springer and it has worked fantastic the one time I was able to get to the range. More rounds needed down the pipe to give a reliability report but Springer's stuff has always been top notch in my experience. Ah I misread your post, my bad. 1 hour ago, asierra350 said: Ok thanks, I’m trying to find someone to do some slide panel/lightening cuts on a gen 1 TSO CGW will do them as far as I know, patriot defense will do a top window as well. Link to comment Share on other sites More sharing options...
BRuss Posted May 8, 2023 Share Posted May 8, 2023 I had Impact Machine do mine. Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted May 8, 2023 Share Posted May 8, 2023 Patriots defense Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now