Wrathen Posted July 29, 2022 Share Posted July 29, 2022 So I have a SP-01 Manual safety, that has the full trigger kit from CGW. https://cajungunworks.com/product/75115-production-legal-pro-package-kit-for-manuel-safety/ its been fine for 200-300 rounds since I did the kit install. Yesterday while at the range for some reason Double Action stopped working. When you pull the trigger with hammer down nothing happens, if hammer is back trigger drops just like normal. Fairly new to CZs as this is my only one. What should I check first? Quote Link to comment Share on other sites More sharing options...
ramnj Posted July 29, 2022 Share Posted July 29, 2022 (edited) This is your problem. https://cajungunworks.com/disconnector-timing/ Edited July 29, 2022 by ramnj Quote Link to comment Share on other sites More sharing options...
DesertTortoise Posted July 29, 2022 Share Posted July 29, 2022 Check the trigger bar tension spring. It has most likely popped out of place. Quote Link to comment Share on other sites More sharing options...
Wrathen Posted July 29, 2022 Author Share Posted July 29, 2022 Short video https://imgur.com/a/MuIPmNI Quote Link to comment Share on other sites More sharing options...
mveto Posted July 30, 2022 Share Posted July 30, 2022 I would say it’s the pre travel screw, it’s come loose and started to back out not allowing the trigger to reset. Saw it happen to a friend a few weeks ago at a match. Quote Link to comment Share on other sites More sharing options...
Wrathen Posted July 30, 2022 Author Share Posted July 30, 2022 Found why… but not sure what to do to fix. https://imgur.com/a/ISnq1yV Quote Link to comment Share on other sites More sharing options...
Wrathen Posted July 30, 2022 Author Share Posted July 30, 2022 Found more while playing with it… don’t know what to do to fix it but it’s the problem https://imgur.com/a/Dh97ekr https://imgur.com/a/NLjf5BQ PS oh and yes the little Y spring thing that attaches to the same place as the mag release is there and seems to be working and keeping upward pressure Quote Link to comment Share on other sites More sharing options...
mveto Posted July 30, 2022 Share Posted July 30, 2022 The top screw on the trigger (pre travel screw) has backed out not allowing the trigger to move far enough forward to allow the trigger bar to reset properly turn it in (tighten it), that should solve the issue Quote Link to comment Share on other sites More sharing options...
Wrathen Posted July 30, 2022 Author Share Posted July 30, 2022 1 minute ago, mveto said: The top screw on the trigger (pre travel screw) has backed out not allowing the trigger to move far enough forward to allow the trigger bar to reset properly turn it in (tighten it), that should solve the issue Thanks Ill give this a try here after I make dinner Quote Link to comment Share on other sites More sharing options...
Wrathen Posted July 30, 2022 Author Share Posted July 30, 2022 (edited) 24 minutes ago, mveto said: The top screw on the trigger (pre travel screw) has backed out not allowing the trigger to move far enough forward to allow the trigger bar to reset properly turn it in (tighten it), that should solve the issue Woot!!! This did indeed fixed it… turns out I missed Loctiting that screw the other one was but this guy was free spinning. thanks a ton! Edited July 30, 2022 by Wrathen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.