CPD7119 Posted September 1, 2020 Share Posted September 1, 2020 Short version is the motor on my case feeder is starting to give out. The high speed is equal to the low speed on my other case feeder and the low speed barely rotates the case feeder plate. I've done some looking and saw Dillon will replace the motor for around $150. I was curious if anyone has just gone out and purchased a replacement motor not through dillon. I have seen a few other companies sell kits but they are practically the same cost. If you have purchased a motor which one did you get and where did you get it. Thanks Link to comment Share on other sites More sharing options...
Sarge Posted September 1, 2020 Share Posted September 1, 2020 2 hours ago, CPD7119 said: Short version is the motor on my case feeder is starting to give out. The high speed is equal to the low speed on my other case feeder and the low speed barely rotates the case feeder plate. I've done some looking and saw Dillon will replace the motor for around $150. I was curious if anyone has just gone out and purchased a replacement motor not through dillon. I have seen a few other companies sell kits but they are practically the same cost. If you have purchased a motor which one did you get and where did you get it. Thanks My motor from Dillon was $60 or so. You have to call or email them since they don’t list the older motor, but they do have them. The 150 price was for variable speed motor no? Link to comment Share on other sites More sharing options...
camaross400 Posted September 2, 2020 Share Posted September 2, 2020 I know that you were asking if anyone has purchased a motor from another company other than Dillon. However, I bought the Dillon variable speed motor and installed it. I wanted more speed to keep up with my auto drive. I am happy with it. I made a short video of the process. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
JatCarver Posted September 20, 2020 Share Posted September 20, 2020 My 10 year old motor was also getting pretty tired. I sprung for the variable speed upgrade and it seems like a improvement. Link to comment Share on other sites More sharing options...
steyr556 Posted February 5 Share Posted February 5 which direction does motor turn cw or ccw Link to comment Share on other sites More sharing options...
steyr556 Posted February 5 Share Posted February 5 when looking down in case feeder the motor shaft turns cw but when ordering a motor which side of motor is considered the actual direction i believe the direction is considered from the shaft facing you so it would be a cw motor is this correct? Link to comment Share on other sites More sharing options...
dillon Posted February 6 Share Posted February 6 CLockwise, looking down from the top Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now