Glouglou Posted April 26, 2020 Share Posted April 26, 2020 This brandis supposed to be imported in France at this end of this summer and the distributor is my principal sponsor. I’ll have to equip it to make a full IPSC race gun. wich modifications would you recommend? i was thinking of an hiperfire trigger , but no real idea for the comp. your advise is very welcome Link to comment
Supertrunk Posted April 27, 2020 Share Posted April 27, 2020 I've got a matched upper and lower from them, Taccom Extreme bolt, a Ballistic Advantage barrel, and the Hyperfire 24C trigger. It's a better shooter than I am, runs like a Swiss watch, and eats everything I throw at it. The now have some "kits" that are ready to assemble and run. Hope this helps. Link to comment
OptimiStick Posted April 27, 2020 Share Posted April 27, 2020 Yeah. I got their stage 2 kit and it runs great. Link to comment
pjb45 Posted April 27, 2020 Share Posted April 27, 2020 I have a two hyperfire triggers. I like them. I went from JP to them. The light JP springs had some issues with harder primers and russian ammo. Their lighter spring weight is ok, not as light as my JPs. Look at the new JP comps. Very very nice. Link to comment
OptimiStick Posted April 27, 2020 Share Posted April 27, 2020 Agree on the Hiperfires. The NFA kits come with them, it was my first Hiperfire,and it's now my favorite trigger. Just make sure you check compatibility with your safety selector , esp if you go Ambi. Link to comment
Glouglou Posted April 27, 2020 Author Share Posted April 27, 2020 Thanks! does their SI recoil réduction work like the JP silent capture or do I have to take another silent capture? Link to comment
stick Posted April 27, 2020 Share Posted April 27, 2020 I run hiperfire 24C's in 3 PCC's. the trigger is awesome. Beware that not all ambi safety's work with the Hiperfire triggers. Link to comment
Glouglou Posted April 27, 2020 Author Share Posted April 27, 2020 6 hours ago, stick said: I run hiperfire 24C's in 3 PCC's. the trigger is awesome. Beware that not all ambi safety's work with the Hiperfire triggers. I’m very interested by this particular point because I’m lefty... wich brands will work? Link to comment
stick Posted April 27, 2020 Share Posted April 27, 2020 36 minutes ago, Glouglou said: I’m very interested by this particular point because I’m lefty... wich brands will work? copied from Hiperfire's website Safety/Selectors: HIPERFIRE® knows of six safety selectors that will not work with HIPERTOUCH® 24 series triggers: Seekins Precision Ambi Safety (60 and 90 deg throws) V SEVEN HYBRID 3 GUN/SPORT SELECTORS Elftmann Slide Safety Selector Talon Ambidextrous 45/90 Safety Selector – Tungsten Grey 2 Lever BAD-CASS or BAD-ASS Short Throw Safety Selector KE Arms Ambi Safety Selector (45/90 deg throws) Link to comment
Glouglou Posted April 27, 2020 Author Share Posted April 27, 2020 Thanks a lot for this great informations. somebody tried coda titanium compensator? It looks good for the money Link to comment
OptimiStick Posted April 27, 2020 Share Posted April 27, 2020 (edited) Odinworks AMS ambi works also. That's the one I used. I could only get it to work with the 45 degree setting, not the 90. Also you can use anti rotation pins, it'll change the trigger feel a bit. But I kept snapping the wimpie hammer pins. I'm using KNS. Edited April 27, 2020 by OptimiStick Link to comment
Glouglou Posted April 28, 2020 Author Share Posted April 28, 2020 A friend of mine just talk to me about the elftman ambi safety? what do you think about it? Link to comment
avastcosmicarena Posted April 30, 2020 Share Posted April 30, 2020 (edited) On 4/28/2020 at 1:33 AM, Glouglou said: A friend of mine just talk to me about the elftman ambi safety? what do you think about it? I love the Elftmann ambi speed safety (push button style instead of swivel). A lot of AR fanboys will tell you that it's a gimmick, it's unnecessary, etc., but it's just because they're traditionalists. In my opinion, on a civilian semiauto gun, where there is no capability to switch between single shot, burst, & full auto, there is no need for a swivel style selector safety. The push-button safety makes more sense. It's either on safe or it's on fire. That's it. It's also more ergonomic/faster, IMO. However, be warned that the Elftmann safety doesn't work with the Hyperfire triggers. I use it with the TriggerTech Diamond trigger on 3 different guns and have no issues. Edited April 30, 2020 by avastcosmicarena Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now