helocat Posted April 11, 2020 Share Posted April 11, 2020 I really like how the CP2000 can have the swage station moved to the other side of the press. This would allow the swager to be in the normal spot but then put in the Immortobot Primer Pocket Probe at station 7 on the other side to confirm the primer pockets are in good shape. BUT if I am going to go to the cost to automate another press and install the sensors, for the $400 more, to just get the RL1100 so it can do double duty. Mainly for resale too, I doubt a case processor sells as fast as a reloading machine when the time comes to sell. For now I am running two 1050 with Ammobots and after 4 months on order I received the Immorto sensors I ordered. (for one machine) I like them so much I am going to order another set of sensors for the other 1050 and am kicking around getting enough to do a dedicated case prep machine since the first set took so long. Link to comment Share on other sites More sharing options...
chevrofreak Posted April 11, 2020 Share Posted April 11, 2020 I've read that it requires you to buy parts to do it. I do like the idea of being able to run the probe and also swage on the same processing pass. Link to comment Share on other sites More sharing options...
AHI Posted April 11, 2020 Share Posted April 11, 2020 I believe you can not on the 1100 , you can on the CP2000. Link to comment Share on other sites More sharing options...
helocat Posted April 13, 2020 Author Share Posted April 13, 2020 Maybe someone with th RL1100 can post a photo of the left side of the press. @chevrofreak I saw that too on the AmmoBot website you have to call Dillon and order the parts to set up the 2nd primer pocket station. The few photos I have seen of the RL1100 it looks like the frame casting is same as the CP2000. Attached is the drawing from AmmoBot showing the parts you have to buy from Dillon. The plate part number #13064 looks like it goes on the two cast threaded points on the left side of the frame. Link to comment Share on other sites More sharing options...
HOGRIDER Posted April 14, 2020 Share Posted April 14, 2020 (edited) 1 hour ago, helocat said: Maybe someone with th RL1100 can post a photo of the left side of the press. @chevrofreak I saw that too on the AmmoBot website you have to call Dillon and order the parts to set up the 2nd primer pocket station. The few photos I have seen of the RL1100 it looks like the frame casting is same as the CP2000. Attached is the drawing from AmmoBot showing the parts you have to buy from Dillon. The plate part number #13064 looks like it goes on the two cast threaded points on the left side of the frame. helo: From this pic (post #2) it appears the holes are there.....but does the tool head need that window that's on the right side? Edited April 14, 2020 by HOGRIDER sp Link to comment Share on other sites More sharing options...
SeattleDude Posted April 14, 2020 Share Posted April 14, 2020 Left side of the RL1100 does NOT have provisions to install Swage Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now