OPENB Posted October 7, 2005 Share Posted October 7, 2005 I have a Schuemann barreled open gun with Bedell comp. I had been using .355 Hornady FMJ's. I used a case of .356's, and now I get key-holing and erratic accuracy. I found a post recently about not going back and forth, but too late. I had been looking for reason to re-barrel in 9mm anyhow, so now that I'm ready, I can't find a decent barrel. The simple solution is to get a Clark/Para Schuemann from Brownells, but they are out of stock, and Shooter's Connection took them off the website. I've been reading the problems with KKM's chambering, and do not feel like fighting with the guy about it. Anyone have a suggestion on a decent barrel for a decent price at a decent wait Link to comment Share on other sites More sharing options...
rtr Posted October 7, 2005 Share Posted October 7, 2005 Call Brazos, he gets STI barrel blanks and cuts his own comp into them, I have one in my Major 9 open gun as seen here: http://www.brianenos.com/forums/index.php?showtopic=28090 Link to comment Share on other sites More sharing options...
OPENB Posted October 7, 2005 Author Share Posted October 7, 2005 I think those are Wilson/Nowlin ramped, and I need a Clark/Para. Correct me if I'm wrong. How much, if I can ask? Thanks. Link to comment Share on other sites More sharing options...
rtr Posted October 7, 2005 Share Posted October 7, 2005 I dunno what kinda ramp it is or the cost of just the barrel, I bought a pre-fit slide, frame and barrel for about $1400. Best suggestion is just call Bob at Brazos he can give you all the details. Link to comment Share on other sites More sharing options...
BrianH Posted October 7, 2005 Share Posted October 7, 2005 You're gonna have a hard time finding clark cut bull barrels anywhere. Link to comment Share on other sites More sharing options...
OPENB Posted October 7, 2005 Author Share Posted October 7, 2005 How come? I think it's easier to machine a frame for the Clark cut. Is there a supply problem or demand? I don't suppose I could modify the ramp bottom of a W/N to fit in my Clark frame, could I? But Brownell's is out of W/N Schuemann's as well, so I guess I'm stuck with my key-holing Super for now. Suggestions still welcome. Link to comment Share on other sites More sharing options...
warpspeed Posted October 7, 2005 Share Posted October 7, 2005 Call Barsto Precsion Machine ( they are closed on Fridays) 760-367-2747 Link to comment Share on other sites More sharing options...
Guy Neill Posted October 7, 2005 Share Posted October 7, 2005 Check directly with Barsto (760-367-2747) or Nowlin (918-342-0689) or Schuemann (541-490-2993) and see what they can do. Guy Link to comment Share on other sites More sharing options...
OPENB Posted October 7, 2005 Author Share Posted October 7, 2005 Thanks for the phone #'s, Guy. For you guys that have gone with the KKM 9mm barrel, was it worth the work? Just thinking about one more option. Link to comment Share on other sites More sharing options...
Bob Hostetter Posted October 8, 2005 Share Posted October 8, 2005 We make them.......... Link to comment Share on other sites More sharing options...
Kingman Posted October 8, 2005 Share Posted October 8, 2005 why not call Jim Clark Directly. Link to comment Share on other sites More sharing options...
OPENB Posted October 8, 2005 Author Share Posted October 8, 2005 Email sent to you, Bob. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now