Load for shadow two using these components

[jeremy kemlo]

Shadow 2. 9mm 147 grain flat point bayou bullets. mixed brass Federal small pistol primers titegroup powder. 

Who’s got a good recipe for me?

[rocket99]

Start at 2.9gr at an OAL that works for your chamber and work your way up to the power factor you desire


Sent from my iPhone using Tapatalk

[Eman]

I’d try 3.0gr and work up. With your barrel, you will probly hit power factor around 3.1-3.2ish. I can’t tell you OAL length. Do the plunk test to figure it out. 

[Single Stack]

I use 3.2 grains @ OAL of 1.15.  Gives me a 137 pf out of a Shadow.  I throated my barrel as well so I could load out longer.

[Dwbsig]

I got a shadow 2 a few months back can't say about the  powder but the oal that is working good for me is 1.110 oal using acme 147 f/p coated don't know if the bayou profile is close to the same or not but you have to load on the short side for the Cz.

[Bulldog317]

3.2 Grains 1.135 and I run Blue Bullets 147 Flat Nose out of my Shadow.