rootacres Posted April 5, 2017 Share Posted April 5, 2017 Ok so I have installed a delta hammer with the xtreme 1 piece sear and a bolo. I was messing with my gun and realized that the factory firing pin block isn't blocking my xtreme FP from going forward without depressing the trigger. What could be causing this? What is the fix, extended FPB? I personally don't care if it works, this is a competition gun only but technically to shoot USPSA Production I need it to work. Link to comment Share on other sites More sharing options...
emjei Posted April 5, 2017 Share Posted April 5, 2017 Once you go Delta / Titan / BOLO route you pretty much need the Extended FPBSent from my SAMSUNG-SM-G900A using Tapatalk Link to comment Share on other sites More sharing options...
johnbu Posted April 6, 2017 Share Posted April 6, 2017 The 1 piece sear nearly always requires the extended FPB. Link to comment Share on other sites More sharing options...
haiedras Posted April 6, 2017 Share Posted April 6, 2017 And be prepared for the extended FPB to interfere with your firing pin a lot...or just buy a bunch of fpbs while you figure out just how much material to take off so the fpb works...but doesn't interfere with the fp movement ever so slightly during the firing sequence. 8) Link to comment Share on other sites More sharing options...
Ck867 Posted April 6, 2017 Share Posted April 6, 2017 cheapest place to buy the extended firing pin block with shipping? Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 6, 2017 Share Posted April 6, 2017 patriotdefense.com benstoegerproshop.com Link to comment Share on other sites More sharing options...
Ck867 Posted April 7, 2017 Share Posted April 7, 2017 On 4/6/2017 at 7:02 AM, MemphisMechanic said: patriotdefense.com benstoegerproshop.com Does this look correct? http://benstoegerproshop.com/xtreme-eaa-tanfoglio-firing-pin-block/ Link to comment Share on other sites More sharing options...
MemphisMechanic Posted April 7, 2017 Share Posted April 7, 2017 (edited) 1 hour ago, Ck867 said: Does this look correct? http://benstoegerproshop.com/xtreme-eaa-tanfoglio-firing-pin-block/ Except that it's not in stock. Same $15 and in stock, here: https://patriotdefense.com/product/xtreme-firing-pin-safety-block/ Edited April 7, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
Ck867 Posted April 7, 2017 Share Posted April 7, 2017 1 hour ago, MemphisMechanic said: Except that it's not in stock. Same $15 and in stock, here: https://patriotdefense.com/product/xtreme-firing-pin-safety-block/ Thanks! Is a new spring needed? Link to comment Share on other sites More sharing options...
waktasz Posted April 7, 2017 Share Posted April 7, 2017 nope Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now