LeviSS Posted February 18, 2017 Share Posted February 18, 2017 (edited) I have a few punches for my CZ. I was wondering if I need any others to tear down a Tanfo. I have: -Starter punch -2mm pin punch -3mm pin punch -2mm roll pin punch -3mm roll pin punch -Assorted standard size pin punches What else is required? Edited February 18, 2017 by LeviSS Link to comment Share on other sites More sharing options...
Brozonelayer Posted February 18, 2017 Share Posted February 18, 2017 I have a 1/16 punch made by Grace USA bought on amazon. It fits the safety pin perfectly. Link to comment Share on other sites More sharing options...
homewrecker07 Posted February 18, 2017 Share Posted February 18, 2017 I have a 1/16 punch made by Grace USA bought on amazon. It fits the safety pin perfectly.Got a link for a set? I should get one Link to comment Share on other sites More sharing options...
aandabooks Posted February 18, 2017 Share Posted February 18, 2017 Buy a full set of roll pin punches. Should have 8 starting with 1/16". Link to comment Share on other sites More sharing options...
LeviSS Posted February 18, 2017 Author Share Posted February 18, 2017 So are they standard sizes? CZ is all metric. Link to comment Share on other sites More sharing options...
ryridesmotox Posted February 18, 2017 Share Posted February 18, 2017 Grace USA - Steel Roll Spring Punch Set - RS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories https://www.amazon.com/dp/B007WADKN0/ref=cm_sw_r_cp_apa_y5iQyb7KQVYHZ Tanfos are metric. But grace doesn't make a metric set that I'm aware of, or they don't advertise one. That set works. I use it myself. Link to comment Share on other sites More sharing options...
MissionaryMike Posted February 18, 2017 Share Posted February 18, 2017 4 hours ago, ryridesmotox said: Grace USA - Steel Roll Spring Punch Set - RS7 - Gunsmithing - Steel Punches - 7 piece - Gunsmith Tools & Accessories https://www.amazon.com/dp/B007WADKN0/ref=cm_sw_r_cp_apa_y5iQyb7KQVYHZ Tanfos are metric. But grace doesn't make a metric set that I'm aware of, or they don't advertise one. That set works. I use it myself. I use this set. Got it from a Midwayusa sale. Might still be running. Link to comment Share on other sites More sharing options...
V2plus25 Posted February 19, 2017 Share Posted February 19, 2017 The Grace punch set is awesome and I have used it many times on my tanfo. Highly recommended. The little bump in the very tip helps keep the punch from moving off the end of the roll pin during repeated hammer strikes on the punch. Link to comment Share on other sites More sharing options...
LeviSS Posted February 19, 2017 Author Share Posted February 19, 2017 No one knows the exact sizes required? If I can get by with just buying a punch or two, I'd rather do that than buy the set. Link to comment Share on other sites More sharing options...
aandabooks Posted February 19, 2017 Share Posted February 19, 2017 1/16" and a 1/8" will get you by. Link to comment Share on other sites More sharing options...
MemphisMechanic Posted February 20, 2017 Share Posted February 20, 2017 (edited) That sounds correct. I can confirm tomorrow night, but you need exactly two. They live in the small toolkit in my range bag. (And only one punch if you don't have an ambi safety.) Edited February 20, 2017 by MemphisMechanic Link to comment Share on other sites More sharing options...
MemphisMechanic Posted February 23, 2017 Share Posted February 23, 2017 1/16" for the ambi safety roll pin. 3/32" for the trigger pin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now