mach1soldier Posted July 19, 2016 Share Posted July 19, 2016 Anyone using TG with a 200 grain bullet out of a glock .40? Looking to make 150 PF or at least enough to cycle a stock glock 22. Would like to use xtreme 200 grain with titegroup since I have an abundance. Any load data would help. Link to comment Share on other sites More sharing options...
BrocDowns Posted July 23, 2016 Share Posted July 23, 2016 i think i was at around 160pf with 3.5 of TG with a 200gr BBI out of a 35. So id try 3.3ish see where that gets you Link to comment Share on other sites More sharing options...
Norone Posted September 14, 2016 Share Posted September 14, 2016 3.8 gets me 169 Link to comment Share on other sites More sharing options...
Foxj66 Posted September 16, 2016 Share Posted September 16, 2016 NOT A GLOCK an STI but with 200s at 1.185 3.9 gives me 169 so taking that info and the fact that you will load to about 1.135 I would start in the 3.2 range. Link to comment Share on other sites More sharing options...
rdinga Posted September 17, 2016 Share Posted September 17, 2016 I tried several loads looking for something light in my glock 22. Settled on 3.8 grains of WST with the SNS 180 no groove bullet. Link to comment Share on other sites More sharing options...
Audia6 Posted October 16, 2016 Share Posted October 16, 2016 3.3 gr tg and 1.135 Link to comment Share on other sites More sharing options...
3GDad Posted January 4, 2017 Share Posted January 4, 2017 Xtreme 200 grain 40 with 3.4 grains of Titegroup at 1.150 OAL out of my Glock 35 gave me a 147 PF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now