Any secret to not losing safety dentents during SP-01 Shadow detail st

[bofe954]

Last time I detail stripped my Shadow I was lucky not to lose them, then spent 45 minutes with a tweezers and pick with the gun in a freezer bag putting them back in...I have to be missing something.

[TennJeep1618]

I've never had any problem. I just put my hand over the frame when installing or removing them. Mine always seem to pop right into place.

[ejevans45]

I used some grease to hold them in place during assembly. Worked pretty well after losing one the first time.

Edited August 13, 2015 by ejevans45

[andrewtac]

Yep a good portion of grease to hold them in place works well.

[huskerlrrp]

As long as I have a bag of extras I don't lose any.

[himurax13]

Well the best way to not lose parts on your shadow is to not detail strip it in the first place. My CZ's only get detail stripped if I am modding or replacing parts. The rest of the time, a quick blast of non-chlorinated brake cleaner is more than enough for the pieces in the frame. Just make sure you remove your grips if you are not running the aluminum ones.

[bafsu92]

Put the frame in a gallon (or larger) zip lock bag and then pop them out so the bag catches them. Like huskerlrrp said though as long as you have spares on hand you won't lose them.

[asimonp79]

Sure, here is a hint- be extreme carefull. Some people do it in plastic bag ( I mean safety dent dissasembly, and not what you thouhgt)