HoboBrasser Posted June 15, 2015 Share Posted June 15, 2015 I am thinking of switching from a C-more Railway to an RTS 2 on my open gun. If you have done this, what do you think? Link to comment Share on other sites More sharing options...
Trent1k1 Posted June 15, 2015 Share Posted June 15, 2015 http://www.brianenos.com/forums/index.php?showtopic=185447&hl=+rts2&page=1is a HUGE thread about RTS2. Link to comment Share on other sites More sharing options...
JMike Posted June 15, 2015 Share Posted June 15, 2015 I like mine a lot. Just ordered another for my back-up gun. Brownells has them for $340. Look at slickguns website for free shipping code. I have about 1500 rounds on mine with no issues. Others have had problems. I use the Cheely mount. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
echotango Posted June 16, 2015 Share Posted June 16, 2015 I just switched back to slide rides on 2 open guns from RTS2's. Link to comment Share on other sites More sharing options...
JMike Posted June 16, 2015 Share Posted June 16, 2015 I just switched back to slide rides on 2 open guns from RTS2's. Did you have problems or did you just not like them? I will say that if there was one thing I could change about these sights, it would be to go to some kind of rheostat switching mechanism rather than the push button design. After every stage, at the ULSC command, I have to tell the RO...give me 4 seconds to turn the damn thing off... Link to comment Share on other sites More sharing options...
rishii Posted June 16, 2015 Share Posted June 16, 2015 I just leave mine on all match I went from a tube sight to a serendipity to a side more to the rts2 yes I'm old and have been doing this a while my 1st rts2 lasted a couple of months till it broke, sent it back for repair they replaced it my 2nd one has so far lasted over a year I've also re-bodied a couple of sliderides due to them cracking at the windage screw blew up a few tasco pdp 2 and 3's a buddy broke a aimpoint anoher one broke a trijicon none of those were abused, my point is no one has designed a totally bullet proof scope the main advantage of it over the railway is it's lighter and shorter it's short enough that it does not cover the ejection port so you no longer have to tune the extractor and ejector to kick the brass out sideways it also leaves the back of the slide open so you don't need a racker the dot height is inbetween a sidemore and the serendipity the 2 thing wish they would change is the battery drawer is flimsey and I'd like a bigger dot than a 6MOA Link to comment Share on other sites More sharing options...
echotango Posted June 16, 2015 Share Posted June 16, 2015 No problems at all, they ran perfectly. I just prefer the glass size, dot size options and brightness of the railway/slide ride. Link to comment Share on other sites More sharing options...
echotango Posted June 16, 2015 Share Posted June 16, 2015 They now offer a 8moa rts2. Link to comment Share on other sites More sharing options...
HoboBrasser Posted June 16, 2015 Author Share Posted June 16, 2015 http://www.brianenos.com/forums/index.php?showtopic=185447&hl=+rts2&page=1is a HUGE thread about RTS2. I read through this, interesting, but I did not find the answer to my specific question, Thanks. Link to comment Share on other sites More sharing options...
JMike Posted June 16, 2015 Share Posted June 16, 2015 Thanks EchoTango! Link to comment Share on other sites More sharing options...
Aircooled6racer Posted June 16, 2015 Share Posted June 16, 2015 Hello: I would stick with what you have. It works and is proven to be a good sight after all these years. Why spend the money on something that may give you problems? Thanks, Eric Link to comment Share on other sites More sharing options...
scooterj Posted June 17, 2015 Share Posted June 17, 2015 I really like the 8 moa RTS2. The dot isn't much larger than the 6 moa, but it is much brighter. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now