chetc Posted April 27, 2015 Share Posted April 27, 2015 Since i am a toolmaker , machinist, i am curious if anyone has ground down the hooks on the hammer where the sear engages, i have a new CZ 75B SA with about 20 shots out of it, but i see it has a mile of creep, so far i am going to order the SAO trigger. remove the firing pin block, remove the lever and replace with a spacer, and change some springs, if i dont grind down the hooks and reharden them, i may try the race or competition hammer. am i missing anything while i have it apart, will also do a polishing of some mating parts. Chet when i remove the firing pin block, can i leave it as is, or do i need to put something in the hole, i cant seem to quite understand what needs to go in the hole for what purpose. Link to comment Share on other sites More sharing options...
kneelingatlas Posted April 27, 2015 Share Posted April 27, 2015 I've reshaped the hooks of the factory hammer and achieved a crisp sub 2# trigger on a 75SA. And no, you don't need to fill the hole. Link to comment Share on other sites More sharing options...
himurax13 Posted April 29, 2015 Share Posted April 29, 2015 OP, it almost sounds like you want a CZ 75 Shadow with a competition hammer Link to comment Share on other sites More sharing options...
jon49erfan Posted April 29, 2015 Share Posted April 29, 2015 The 75 Shadow SA is $300 more than the normal SA and has a different hammer, sights, and a non FPB slide. To me, I'd get the standard SA and do the work yourself and save money. Since the gun isn't Production legal anyway, pulling the fpb isn't a big deal. Link to comment Share on other sites More sharing options...
himurax13 Posted April 29, 2015 Share Posted April 29, 2015 (edited) The 75 Shadow SA is $300 more than the normal SA and has a different hammer, sights, and a non FPB slide. To me, I'd get the standard SA and do the work yourself and save money. Since the gun isn't Production legal anyway, pulling the fpb isn't a big deal. Well besides the cooler looking rollstamp, I prefer not to have guns that use a crosspin to retain the firing pin. It also comes with the 75 champion hammer, 1.5mm Fiber Optic Front & Fixed Rear Sights, Alimunum SAO trigger with overtravel adjustment, and a lighter recoil and main springs. http://czcustom.com/CZ75SHADOWSABLACK.aspx Edited April 29, 2015 by himurax13 Link to comment Share on other sites More sharing options...
twowheels Posted April 29, 2015 Share Posted April 29, 2015 Chet you don't need to fill the hole when you remove the FPB. Link to comment Share on other sites More sharing options...
jon49erfan Posted April 29, 2015 Share Posted April 29, 2015 The 75 Shadow SA is $300 more than the normal SA and has a different hammer, sights, and a non FPB slide. To me, I'd get the standard SA and do the work yourself and save money. Since the gun isn't Production legal anyway, pulling the fpb isn't a big deal. Well besides the cooler looking rollstamp, I prefer not to have guns that use a crosspin to retain the firing pin. It also comes with the 75 champion hammer, 1.5mm Fiber Optic Front & Fixed Rear Sights, Alimunum SAO trigger with overtravel adjustment, and a lighter recoil and main springs. http://czcustom.com/CZ75SHADOWSABLACK.aspx I know what the differences are, thats why I listed them. The trigger is just a stock 75 SA trigger. The hammer and sights are $150. Paying the extra money to stay in production makes sense, but this isnt production legal so who cares? Save the other $150 and buy ammo. Link to comment Share on other sites More sharing options...
himurax13 Posted April 29, 2015 Share Posted April 29, 2015 (edited) The 75 Shadow SA is $300 more than the normal SA and has a different hammer, sights, and a non FPB slide. To me, I'd get the standard SA and do the work yourself and save money. Since the gun isn't Production legal anyway, pulling the fpb isn't a big deal. Well besides the cooler looking rollstamp, I prefer not to have guns that use a crosspin to retain the firing pin. It also comes with the 75 champion hammer, 1.5mm Fiber Optic Front & Fixed Rear Sights, Alimunum SAO trigger with overtravel adjustment, and a lighter recoil and main springs. http://czcustom.com/CZ75SHADOWSABLACK.aspx I know what the differences are, thats why I listed them. The trigger is just a stock 75 SA trigger. The hammer and sights are $150. Paying the extra money to stay in production makes sense, but this isnt production legal so who cares? Save the other $150 and buy ammo. The SA triggers I have received in the past were plastic. Plus you can save the money on not having to buy a new hammer, sear spacer, new sights, fitting the sear to the safety without screwing up the sear, assorted springs, and have something that is worth a tad more than a B modeled CZ. I also like the dovetail and sight options of the Shadow slide a bit more. Edited April 29, 2015 by himurax13 Link to comment Share on other sites More sharing options...
chetc Posted April 30, 2015 Author Share Posted April 30, 2015 since i already have the CZ75B SA i am going to rip it apart and do the normal polishing of parts where needed ect. i might be taking it apart more than once (LOL) so i want to replace the pins with ones that do not have to be peened or staked, i am going to machine the hooks will be taking it apart a few times unless i get lucky on the first try, looking for suggestions on what pins i will be needing ect, and if someone knows the thickness of the spacer, and the ID and the OD that goes in the place of the lever for the FPB. so i can machine one up ahead of time thanks Chet Link to comment Share on other sites More sharing options...
jon49erfan Posted April 30, 2015 Share Posted April 30, 2015 (edited) measure the lifter. that will give you ID, and thickness for the spacer. Edited April 30, 2015 by jon49erfan Link to comment Share on other sites More sharing options...
Leadpilot Posted April 30, 2015 Share Posted April 30, 2015 since i already have the CZ75B SA i am going to rip it apart and do the normal polishing of parts where needed ect. i might be taking it apart more than once (LOL) so i want to replace the pins with ones that do not have to be peened or staked, i am going to machine the hooks will be taking it apart a few times unless i get lucky on the first try, looking for suggestions on what pins i will be needing ect, and if someone knows the thickness of the spacer, and the ID and the OD that goes in the place of the lever for the FPB. so i can machine one up ahead of time thanks Chet If you plan on taking the gun apart a few times I'd get the CGW floating trigger pin, firing pin retaining pin, and a couple of their hammer pins. I was going to machine a spacer as well but for $1.50 it's not worth the hassle. Link to comment Share on other sites More sharing options...
chetc Posted April 30, 2015 Author Share Posted April 30, 2015 since i already have the CZ75B SA i am going to rip it apart and do the normal polishing of parts where needed ect. i might be taking it apart more than once (LOL) so i want to replace the pins with ones that do not have to be peened or staked, i am going to machine the hooks will be taking it apart a few times unless i get lucky on the first try, looking for suggestions on what pins i will be needing ect, and if someone knows the thickness of the spacer, and the ID and the OD that goes in the place of the lever for the FPB. so i can machine one up ahead of time thanks Chet If you plan on taking the gun apart a few times I'd get the CGW floating trigger pin, firing pin retaining pin, and a couple of their hammer pins. I was going to machine a spacer as well but for $1.50 it's not worth the hassle. good info, that is what i need to know thanks chet Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now