chetc Posted March 10, 2015 Share Posted March 10, 2015 i am looking into getting my wife a 9 mm gun for the range, i bought her a Sig P320 a few weeks ago, so we were at the range the other day, and she held a XDM 9mm 4.5 in barrel. she really like the grip the XDM, i like the P320, but i have no problem getting my wife the XDM, i am reading about the roll pin failures on the striker. has this been corrected in the new XDM's if not the way it looks this gun needs to fired with a snap cap, am i correct. Chet Link to comment Share on other sites More sharing options...
DWNZRO Posted March 10, 2015 Share Posted March 10, 2015 I have that exact gun with more than 20,000 rounds through it. I've never had a roll pin fail, but I do dry fire with snap caps. Granted, I drop the striker on an empty chamber pretty frequently during the "unload and show clear". Moral of the story is, if you're doing a session of dry fire then use snap caps. But it won't hurt anything to drop the striker on an empty chamber every once in a while. Obligatory photo: Link to comment Share on other sites More sharing options...
Tarkeg Posted March 10, 2015 Share Posted March 10, 2015 Here you go... Cheap insurance. http://shop.powderriverprecision.net/product.sc?productId=32&categoryId=4 Link to comment Share on other sites More sharing options...
Loves2Shoot Posted March 10, 2015 Share Posted March 10, 2015 Have they fixed the flaw of the Glock? Long and the short of it is if there isn't a round in the chamber, something will stop it. Replacing the designed roll pin with one that won't absorb the energy puts that energy into the striker. I would rather replace the simple roll pin as needed than a striker. Link to comment Share on other sites More sharing options...
Reshoot Posted March 11, 2015 Share Posted March 11, 2015 There is no issue with that pin, in my neck of the woods. I shoot 2 Xdm's and shoot with an entire group of people that shoot them. I have never met anyone that has had that pin break Link to comment Share on other sites More sharing options...
d_striker Posted March 11, 2015 Share Posted March 11, 2015 I've got 4 XDm's. I've had the pin break in a couple of them from dry firing without a snap cap. It's not a big deal though. You don't even know the pin is cracked until you go to punch it out. Link to comment Share on other sites More sharing options...
BritinUSA Posted March 11, 2015 Share Posted March 11, 2015 I use snap-caps when I dry-fire (not that often) but I ordered a set of these pins just so I have some in my spare-parts kit. Link to comment Share on other sites More sharing options...
MTGlass Posted March 11, 2015 Share Posted March 11, 2015 I had the striker retainer pin come apart in three pieces in my XD .40 Service. I also have three XDm's which get run much harder than the XD .40 so I replaced the factory split pins in all my XD guns with "Metric Coiled Spring Pin, 18-8 Stainless Steel, M3 Diameter, 16mm Length" from McMaster-Carr; part# 91612A149. Of course, I now have 21 spares floating around. Link to comment Share on other sites More sharing options...
Vlad Posted March 11, 2015 Share Posted March 11, 2015 I've seen 2 break on the range. The first one we "fixed" by scavenging 5 range bags for the correct diameter roll pin, cutting it size with a Leatherman, and hammering into place with a random heavy object. The second time we kinda pushed it back in, it looked like it hold up for the rest of the match, and the gun went to smith after. Link to comment Share on other sites More sharing options...
drysideshooter Posted March 13, 2015 Share Posted March 13, 2015 My son and I own several XDm's. The pin in known to fail primarily due to dryfiring. Since it's a known issue I got several of the pins from Springer Precision and keep them and a roll pin starter in the tool kit. That being said, with a couple of XDm's with very high round counts, we haven't had one fail yet. I suppose if we didn't have the replacement parts to fix them Murphy's Law would have probably kicked in and we would have had some fail. Link to comment Share on other sites More sharing options...
pbgunrunner Posted March 21, 2015 Share Posted March 21, 2015 I replace mine in my annual complete tear down and lube. I dry fire the heck out of my gun without caps. Ive never had one broken, but ive had one chewed up that was on its way. I got a 5 pack from rich at canyon creek- cheap insurance!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now