bradthegunmaniac Posted October 26, 2014 Share Posted October 26, 2014 When I pull the trigger and hold it in while racking the slide to check the reset the slide will stay back???? Link to comment Share on other sites More sharing options...
mwx40x40 Posted October 26, 2014 Share Posted October 26, 2014 I hate to say, but I assuming nothing here. Did you take the magazine out? Link to comment Share on other sites More sharing options...
bradthegunmaniac Posted October 26, 2014 Author Share Posted October 26, 2014 LOL yes Link to comment Share on other sites More sharing options...
buckaroo45 Posted October 26, 2014 Share Posted October 26, 2014 Precluding a major mechanical failure, first place I'd look would be the slide release cause it's the only thing that would NORMALLY lock the slide back. Did you recently field strip the gun? It's a stretch but mebbe it didn't go back together correctly. You won't know till you look. Link to comment Share on other sites More sharing options...
beltjones Posted October 27, 2014 Share Posted October 27, 2014 Please state your answer in the form of a question. Also, your thread title gives very little information to prospective readers. Link to comment Share on other sites More sharing options...
MikeRush Posted October 27, 2014 Share Posted October 27, 2014 When I pull the trigger and hold it in while racking the slide to check the reset the slide will stay back???? I've seen that with a Glock using light recoil springs. It will hang up just out of battery, mine would then proceed forward if I released the trigger. Never seen it on a 19/2011. Need more detail. Is it staying completely to the rear, or almost returning to battery? Either way I'd start with a fresh recoil spring then check to make sure the disconnector moves freely. Link to comment Share on other sites More sharing options...
works for ammo Posted October 27, 2014 Share Posted October 27, 2014 So if you press the trigger, hold it back and rack the slide the slide hangs up and dose not return forward? What happens when you release the trigger? Dose the slide release forward? If that is the case I would check the sear spring tension on the disconnector. Link to comment Share on other sites More sharing options...
bradthegunmaniac Posted October 27, 2014 Author Share Posted October 27, 2014 Works for ammo that is exactly what happens. The slide more or less hangs up feels like it catching on some thing. If I let the trigger out slide falls. Link to comment Share on other sites More sharing options...
JON Posted October 27, 2014 Share Posted October 27, 2014 Jake Link to comment Share on other sites More sharing options...
Powder Finger Posted October 27, 2014 Share Posted October 27, 2014 hanging on disco. Link to comment Share on other sites More sharing options...
BigGabe Posted October 28, 2014 Share Posted October 28, 2014 Easy to see if it's hanging on the disconnector . Look down through the ejection port to see if the bottom of the breech face is stopping when it gets to the disconnector as you let the slide move forward. My slide will override the disconnector with the trigger held back but your spring pressure my be more then mine or you my need to polish the disconnector some. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now