Torogi Posted December 12, 2013 Share Posted December 12, 2013 Or you could maybe check with Jim Bodkin at shooterready.biz. I heard he carry some EG parts and also a dealer of Henning's products. Link to comment Share on other sites More sharing options...
Kahai808 Posted December 20, 2013 Author Share Posted December 20, 2013 picked up my stock 2 yesterday! started polishing my trigger bar. between learning to disassemble, polishing and reassembling it took me a good 3.5 hours. installed new hammer spring, sear spring,TR spring, EG xl firing pin. i guess we will see how it goes on saturday at norco. gonna put my first rounds through it and shoot a match. should be fun Link to comment Share on other sites More sharing options...
dlp40cal Posted December 23, 2013 Share Posted December 23, 2013 where are you buying the stock 2 i would like to have one ,and cost. Link to comment Share on other sites More sharing options...
dlp40cal Posted December 23, 2013 Share Posted December 23, 2013 where did you buy stock 2 and cost please. Link to comment Share on other sites More sharing options...
dlp40cal Posted December 23, 2013 Share Posted December 23, 2013 where did you buy stock2 and cost Link to comment Share on other sites More sharing options...
Kahai808 Posted December 23, 2013 Author Share Posted December 23, 2013 I'm running a 13lbs spring with the EG firing pin, CCI and Win primers run just fine! Link to comment Share on other sites More sharing options...
Mlussoro Posted December 24, 2013 Share Posted December 24, 2013 you bought that gun in CALI? funny cuz i heard they were on the no GO list? i tried to sell my gun to a buddy of mine in cali this summer and the local gun shop wouldnt even look at it , didnt want it in their parking lot or near the store because EAA and TANG were not legal, the only way was to put a 6 to 7 inch barrel and put a block in the mags so they could only hold 1 round and it would be legal under the thompson center fire pistol law Link to comment Share on other sites More sharing options...
Torogi Posted December 24, 2013 Share Posted December 24, 2013 i would like to add that in CA, we have a roster list. If a gun is not on the list, its called off-roster gun. It is not an illegal gun, it is just that, off-roster gun. Before it gets political, look up who does SSE or have your buddy visit Calguns. or you could PM me for info. Not all LGS do SSE btw. Link to comment Share on other sites More sharing options...
Kahai808 Posted December 24, 2013 Author Share Posted December 24, 2013 you bought that gun in CALI? funny cuz i heard they were on the no GO list? i tried to sell my gun to a buddy of mine in cali this summer and the local gun shop wouldnt even look at it , didnt want it in their parking lot or near the store because EAA and TANG were not legal, the only way was to put a 6 to 7 inch barrel and put a block in the mags so they could only hold 1 round and it would be legal under the thompson center fire pistol lawMlussoro it was a single shot exemption. Which makes it perfectly legal. Torogi is correct. Link to comment Share on other sites More sharing options...
kneelingatlas Posted December 24, 2013 Share Posted December 24, 2013 you bought that gun in CALI? funny cuz i heard they were on the no GO list? i tried to sell my gun to a buddy of mine in cali this summer and the local gun shop wouldnt even look at it , didnt want it in their parking lot or near the store because EAA and TANG were not legal, the only way was to put a 6 to 7 inch barrel and put a block in the mags so they could only hold 1 round and it would be legal under the thompson center fire pistol law A word to the wise: most things heard in a LGS are partly or completely bullshit You can count on the OWNER of the gun shop to give you a reliable answer to a question about the policy of that particular shop, but anything more than that should only be considered a primer for your own research. As a certifiable gun nut, I've been in quite a few gun shops and it's astounding some of the stupid crap you'll overhear Link to comment Share on other sites More sharing options...
Mo Hepworth Posted December 24, 2013 Share Posted December 24, 2013 picked up my stock 2 yesterday! started polishing my trigger bar. between learning to disassemble, polishing and reassembling it took me a good 3.5 hours. installed new hammer spring, sear spring,TR spring, EG xl firing pin. i guess we will see how it goes on saturday at norco. gonna put my first rounds through it and shoot a match. should be fun bottom of sear cage where the trigger bar runs under and down....top of plunger, and disconnector top and bottom. Link to comment Share on other sites More sharing options...
Kahai808 Posted January 3, 2014 Author Share Posted January 3, 2014 Bought another Stock II for a back up last week! Now just have to wait for Cali's damn 10day wait. Pic's coming soon! Link to comment Share on other sites More sharing options...
Kahai808 Posted January 9, 2014 Author Share Posted January 9, 2014 Finally got the twin! Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 9, 2014 Share Posted January 9, 2014 Now that's what I call a 69! Link to comment Share on other sites More sharing options...
Kahai808 Posted January 9, 2014 Author Share Posted January 9, 2014 Hahaha! Link to comment Share on other sites More sharing options...
Torogi Posted January 9, 2014 Share Posted January 9, 2014 Very nice! Kinda like mine Link to comment Share on other sites More sharing options...
ogiebb Posted January 9, 2014 Share Posted January 9, 2014 where did all those Stock 2's come from ? .... those are nice looking Stock 2's Link to comment Share on other sites More sharing options...
Kahai808 Posted January 9, 2014 Author Share Posted January 9, 2014 From some crazy guy in Arizona lol!!!!! Link to comment Share on other sites More sharing options...
ogiebb Posted January 10, 2014 Share Posted January 10, 2014 From some crazy guy in Arizona lol!!!!! Hahahaha.... They look real good w/ the silver grips Link to comment Share on other sites More sharing options...
Vanniek71 Posted January 10, 2014 Share Posted January 10, 2014 I'd love to add a stock 2 to my Tanfo stable! Link to comment Share on other sites More sharing options...
BeerBaron Posted January 10, 2014 Share Posted January 10, 2014 lovely looking stock II's. it's interesting that your EAA branded stock II has the barrel protruding from the slide. my tanfoglio branded (aus market) stock II has the slide and frame fit flush with the barrel. and if anything (since we have min barrel length rules) aus barrels are usually the same or longer than their US counterparts (see CZ shadow for example). I wonder if mine has longer slide and frame? here's a pic of my little stock II. very basic. just has pen spring mainspring, recoil spring change, factory walnut grips and a set of henning grip screws. Link to comment Share on other sites More sharing options...
CleverUsername Posted January 10, 2014 Share Posted January 10, 2014 (edited) That is a double action limited(4.75" barrel and longer slide). Interesting that its considered a stock there. Edited January 10, 2014 by CleverUsername Link to comment Share on other sites More sharing options...
Vanniek71 Posted January 10, 2014 Share Posted January 10, 2014 That is a double action limited(4.75" barrel and longer slide). Interesting that its considered a stock there. It's not tapped for an optic mount though, aren't all the Limited guns tapped? Mine is. Link to comment Share on other sites More sharing options...
BeerBaron Posted January 10, 2014 Share Posted January 10, 2014 Hmm they do call it a "stock 2 limited". The slide has "stock" on the left side and "limited 38" on the right. It seems like they use the limited frame and slide but without the holes for optic mount drilled. Measuring the slide from the front to the back along the join between slide and frame it's 7.5 inch. It's 4.5 inch from muzzle to slide stop hole. Muzzle to breach face is indeed 4.75 inch. Barrel is 4.75 inch. 121mm. Muzzle end to the part of the frame where the trigger guard starts is 3 inch. Link to comment Share on other sites More sharing options...
kneelingatlas Posted January 10, 2014 Share Posted January 10, 2014 It's because of the 120mm minimum on pistol barrels in Australia. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now