noylj Posted December 20, 2012 Share Posted December 20, 2012 I have seen several race guns with the C-More sight mounted sideways. Besides looking strange, I can't see how the owner can make sight adjustments with the windage screws and the elevation lock screw being next to the slide. What is the advantage of this mount? Link to comment Share on other sites More sharing options...
EkuJustice Posted December 20, 2012 Share Posted December 20, 2012 There is an opening in the mount so adjustments are easily done. The advantage is the sight is right over the bore so the index is more iron sight like and there isn't the offset for close tight shots like the verticle Link to comment Share on other sites More sharing options...
A45100 Posted December 20, 2012 Share Posted December 20, 2012 I changed to a sideways mount this year and I really like the dot being a lot closer to the bore of the gun. I pick the dot up a lot quicker, I don't have as much offset on those real close, tight shots and I have less trouble finding the dot on the one handed shots, especially weak hand only. What I don't like is the bulk and I've got such a long slide racker now that it really torques the slide when I rack it and it kind of binds things up. I've got my gunsmith working on a new mount to a Vortex Razor Dot. it looks like we are going to be able to get the dot at the same height, with a lot less bulk. Link to comment Share on other sites More sharing options...
EkuJustice Posted December 20, 2012 Share Posted December 20, 2012 Running a cheely shorty racker on the right side in mine an am really liking it. It's a hair slower maybe but my gun runs so its rarely needed Link to comment Share on other sites More sharing options...
Sarge Posted December 20, 2012 Share Posted December 20, 2012 Dot sits lower than the more traditional, and much better looking, vertical mount. Comes in handy if you switch back and forth a lot between optics and iron sights. Link to comment Share on other sites More sharing options...
TGibe Posted December 21, 2012 Share Posted December 21, 2012 Dot sits lower than the more traditional, and much better looking, vertical mount. Comes in handy if you switch back and forth a lot between optics and iron sights. Yeah. Sarge covers my main reason for converting - switching between iron sights and open is much easier for me. YMMV Link to comment Share on other sites More sharing options...
Jaxshooter Posted December 21, 2012 Share Posted December 21, 2012 I also converted last year after shooting the traditional mounts for years. Dot aquisition is much eaiser and you don't have to make hold over/under adjustments like a top mount. I have a short racker on the right side of my Limcat. Johnny made two rackers for my gun one long that comes out on the left side and the short one for the right side. I like the right side racker better than I did a normal left side racker that I used before the change in mounts. Link to comment Share on other sites More sharing options...
Rick88 Posted December 23, 2012 Share Posted December 23, 2012 If your moving from production or limited the sideways mount works well for beginners in open, kinda like training wheels on a bike but once you learn, the vertical mount will be the best choice overall. Link to comment Share on other sites More sharing options...
Chip_E Posted December 23, 2012 Share Posted December 23, 2012 I went for the sideways mount because it indexed more like the iron sights I was used to in production, because I knew there'd be fewer ejection issues, and almost all the open shooters at my club use it. Might have something to do with Jim Thompson (Quinn II) being an active member of the club and on the BOD. After shooting the sideways mount, I'm hooked. However, when wifEy and I shot the Brazil IPSC Championship, we borrowed guns from some great guys there. Her borrowed Limcat had the standard mount, and she never complained or had a problem with re-learning the indexing. She was nice enough to let me take the loaner with the sideways mount....maybe because she knew I'd complain. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now