rpm28 Posted July 19, 2012 Share Posted July 19, 2012 Looking for 220gr. subsonic loads.....who's got em? Link to comment Share on other sites More sharing options...
prreed10 Posted July 19, 2012 Share Posted July 19, 2012 Lots of info here: http://300blackout.com Link to comment Share on other sites More sharing options...
Tom Freeman Posted July 19, 2012 Share Posted July 19, 2012 Get a couple pounds of Vhit N-110. It will give you the best accuracy of pretty much anything out there. Link to comment Share on other sites More sharing options...
Mark K Posted July 20, 2012 Share Posted July 20, 2012 8.9gr of H110 Mark K Link to comment Share on other sites More sharing options...
rpm28 Posted July 21, 2012 Author Share Posted July 21, 2012 Thanks guys, much appreciated. Link to comment Share on other sites More sharing options...
UW Mitch Posted July 24, 2012 Share Posted July 24, 2012 I bought some from Southwest Ammo on their group buy: http://www.southwestammunition.com/category_s/124.htm My thinking is this way I don't have to cut and form my own brass. Once I shoot this up, I'll have some brass to use to reload with down the road. ~Mitch Link to comment Share on other sites More sharing options...
dogtired Posted July 26, 2012 Share Posted July 26, 2012 I could not get anything subsonic until I found some AA1680, I think it was 11.1 gr with 220/225 bullets. Link to comment Share on other sites More sharing options...
oregonshooter Posted July 26, 2012 Share Posted July 26, 2012 Lilgun works great in my 9.75" 300whisper with 220smks or 168smks and I think the charge is 8.2gr but I'd have to check Link to comment Share on other sites More sharing options...
Aaron M Posted July 26, 2012 Share Posted July 26, 2012 What gas tube length? pistol? Carbine? Suppressor? Link to comment Share on other sites More sharing options...
rpm28 Posted July 26, 2012 Author Share Posted July 26, 2012 What gas tube length? pistol? Carbine? Suppressor? Pistol length with integral suppressor. Leonidas upper in the works. Link to comment Share on other sites More sharing options...
Mark K Posted July 26, 2012 Share Posted July 26, 2012 What gas tube length? pistol? Carbine? Suppressor? I am using pistol length with Noveske adjustable gas block. I had to fine tune it to get it to cycle dependably, and lock back on last shot, etc. I am using a Liberty Pandora suppressor. Mark K. Link to comment Share on other sites More sharing options...
oregonshooter Posted August 3, 2012 Share Posted August 3, 2012 What gas tube length? pistol? Carbine? Suppressor? mines a pistol ported Douglas with 3pos switchblock from Paladin machine I use a trident 9 on it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now