dblaelliott Posted March 20, 2012 Share Posted March 20, 2012 Hi, I'm looking for load data on titegroup, my lee book is very limited. any ideas? Thanks, Aaron Link to comment Share on other sites More sharing options...
EkuJustice Posted March 20, 2012 Share Posted March 20, 2012 what kinda gun, OAL Link to comment Share on other sites More sharing options...
RUSHARP2 Posted March 20, 2012 Share Posted March 20, 2012 I use 4.7 grains under a 180 Montana Gold cmj. I load to 1.18. It makes about 170 in my Tanfoglio Limited with 4.75 in barrel. What gun are using and what is your intended use? Link to comment Share on other sites More sharing options...
dblaelliott Posted March 20, 2012 Author Share Posted March 20, 2012 I'm using a Glock 22C, 165gr. precision delta flat nose. Mainly just target shooting, maybe get back into IDPA if I have time. Link to comment Share on other sites More sharing options...
dblaelliott Posted March 20, 2012 Author Share Posted March 20, 2012 Oh yeah, I've been loading 4.3 gr. titegroup at 1.125 oal and it seems kinda lite Link to comment Share on other sites More sharing options...
Cy Soto Posted March 20, 2012 Share Posted March 20, 2012 I'm using a Glock 22C... Just FYI the Glock "C" pistols are not IDPA legal. You may need get a different barrel for it. On a separate note, the search function is your friend... Link to comment Share on other sites More sharing options...
dblaelliott Posted March 20, 2012 Author Share Posted March 20, 2012 didn't know that, I've got some buyers remorse with this glock, thinking about upgrading to a STI. Link to comment Share on other sites More sharing options...
Cy Soto Posted March 20, 2012 Share Posted March 20, 2012 didn't know that, I've got some buyers remorse with this glock, thinking about upgrading to a STI. I am a Glock guy myself and I will say that, if you get the chance to move to an STI, you will not be disappointed. Link to comment Share on other sites More sharing options...
dblaelliott Posted March 20, 2012 Author Share Posted March 20, 2012 I have nothing against glock, quite the contrary. if I had it to do over though, I'd get a third gen. glock 17, and a STI chambered in .40 Link to comment Share on other sites More sharing options...
RiggerJJ Posted March 20, 2012 Share Posted March 20, 2012 Check the Hodgdon website. Lots and lots of load data! Www.hodgdon.com/basic-manual-inquiry.html jj Link to comment Share on other sites More sharing options...
dblaelliott Posted March 20, 2012 Author Share Posted March 20, 2012 checked hogdon site, they only have data for hp's, is there any difference in loading fmj versus hp? Link to comment Share on other sites More sharing options...
Cy Soto Posted March 20, 2012 Share Posted March 20, 2012 checked hogdon site, they only have data for hp's, is there any difference in loading fmj versus hp? There is some but it's not huge. Nonetheless the published velocities will be different than the ones you see in your pistol for different reasons: 1) Your G22 has a longer barrel than the typical 4" used in the published data, 2) Glock barrels are polygonal and, 3) the barrel of your 22 is compensated. Your best bet is to get yourself a chronograph and run your reloads through it. Link to comment Share on other sites More sharing options...
Doc Hunter Posted March 22, 2012 Share Posted March 22, 2012 Get yourself a Storm Lake drop in bbl. and never look back. They also make a conversion bbl. to 9mm. You have options. Link to comment Share on other sites More sharing options...
dblaelliott Posted March 22, 2012 Author Share Posted March 22, 2012 I've been considering a after market bbl for it, kinda want a supported chamber , is storm lake fully supported? Link to comment Share on other sites More sharing options...
ogiebb Posted March 22, 2012 Share Posted March 22, 2012 1.140 oal, 180gr CMJ with 4.5 TG win small pistol give me a nice soft 170pf. shot thru my Gans and SV 5" barrels Link to comment Share on other sites More sharing options...
peasant Posted May 3, 2012 Share Posted May 3, 2012 (edited) 180 Precision Delta fmj fp... 1.180 oal, 5.0 TG Fed small pistol... out of an STI Edge 5 inch... runs good for me... I like the KKM for a Glock to get the support your looking for...I little more money but worth it...great to work with... Edited May 3, 2012 by peasant Link to comment Share on other sites More sharing options...
40S&W Posted May 3, 2012 Share Posted May 3, 2012 Berry Plated 165gr. HBRN, 5.0 gr. TG, OAL 1.134, avg. 1085 FPS, avg. 168.21 PF Berry Plated 165gr. HBRN, 5.1 gr. TG, OAL 1.134, avg. 1098 FPS, avg. 170.22 PF This is my load for SS/L-10 Berry Plated 165gr. HBRN, 5.7 gr. TG, OAL 1.134, avg. 1173 FPS, avg. 182.00 PF Custom 1911 with a match 5" non-ramped bushing KKM barrel. There is a little more muzzle flip with the 165gr., but it is more accurate than the 180gr. IMHO, with the round nose less chance of feed problems vs. the flat point as long as you have the correct OAL for your barrel & mags. Although I have no problems with the 180gr. flat point or conical in my gun at the same OAL. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now