Alan Adamson Posted September 29, 2011 Share Posted September 29, 2011 I'm looking at a standard STI frame, there are a bunch of reasons why this happened, but regardless, the frame is cracked vertically from the top edge of the frame in the square notch where the slide release cutout is... The crack extends from the top of that notch, vertically down to the flat or shelf where the slide release sets... this is right behind the detent to put this in perspective. Here's a picture taken through a 7x loop. so, what are the options to fix this? I doubt it can be welded and recut, So besides the costs for the frame kit from STI, how involved is the fix and how costly? I'm pretty sure I know what happened, but until my gunsmith looks at it, I'm going to keep that to myself... This isn't my gun, but I might have an option to buy it... In the course of looking it over, I found this problem and what I believe caused it (which can easily be fixed). The top end looks pretty good. Thanks for any advice, Alan Link to comment Share on other sites More sharing options...
GeneralChang Posted September 29, 2011 Share Posted September 29, 2011 (edited) STI will warranty the frame I bet, give them a call. 512-819-0656 ask for the warranty department. Edited September 29, 2011 by GeneralChang Link to comment Share on other sites More sharing options...
Merlin Orr Posted September 29, 2011 Share Posted September 29, 2011 If you buy a new frame kit I want this one.... I think it can be welded.... May not really be economically feasible by the time all is said and done though..... Link to comment Share on other sites More sharing options...
Too_Slow Posted September 29, 2011 Share Posted September 29, 2011 If STI warranties the frame they will want the old one back so they can destroy it and put the old SN on the new frame. I have had this done before on an old 38 Super open gun. Brian Link to comment Share on other sites More sharing options...
AZGunut Posted October 2, 2011 Share Posted October 2, 2011 It is from the square corner of the slide stop constantly pounding the rounded corner of the frame. We put a heavy bevel on the slide stop to help alleviate this. Look at 4-5 of your friends gun in the same spot and don't be surprised if almost all of them are cracked there as well. Let us know what STI says, always wanted to know. Link to comment Share on other sites More sharing options...
brongy Posted September 28, 2013 Share Posted September 28, 2013 sorry to ressurect an old thread but can anyone show what the bevel on the slidestop looks like to avoid this from happening? Link to comment Share on other sites More sharing options...
Jediwarrior Posted September 28, 2013 Share Posted September 28, 2013 (edited) I have seen a lot of STI frames that are cracked in this area. I will happen with hard use. STI reinforced this area with added material directly under this corner. You frame does not have this improvement. Here is a pic of that reinforcement. A bevel or radius on the corner of the slide stop won't prevent this. When installing an oversized slide stop, like EGW, file a radius where the corner contacts the radius on the frame. This allows the slide stop to enter and lock into position. I beg to differ with AZ guy, the slide stop does not impact down to cause this. It's the pounding from the barrel to the VIS and HIS, especially with bull and compensated barrels. Saw my first cracked frame in 1999. Edited September 28, 2013 by Jediwarrior Link to comment Share on other sites More sharing options...
Jediwarrior Posted September 28, 2013 Share Posted September 28, 2013 (edited) This reinforcement does NOT prevent cracking. It does prevent the crack from propagating all the way down inside. The early cracked frame I saw eventually had to be retired when it started having reliability issues. It was a 38 Super open racegun. Edited September 28, 2013 by Jediwarrior Link to comment Share on other sites More sharing options...
Jasonub Posted September 29, 2013 Share Posted September 29, 2013 Did Sti replace the retired frame? Sent from my iPhone using Tapatalk - now Free Link to comment Share on other sites More sharing options...
troupe Posted October 9, 2013 Share Posted October 9, 2013 If STI won't replace the frame, check with George at EGW. They can weld almost anything cracked and they produce world class work as well as parts. I have known George for many years, and there work is top rated. Tommy Roupe Link to comment Share on other sites More sharing options...
thayerp81 Posted October 22, 2013 Share Posted October 22, 2013 i second the welding option Link to comment Share on other sites More sharing options...
Jediwarrior Posted November 2, 2013 Share Posted November 2, 2013 Welding will not prevent cracking again. This is due to a design flaw. The cross-section on that part on the left side is too thin. There are probably thousands of STI/SVI/SPS frames out there that are cracked and the owner is not aware of it, or the owner doesn't care. Here is a pic of an early TRI frame with a cutout on the right side for an ambi slide stop. This created a weak spot which caused it to crack on the right side. Note the holes for a scope mount. This allowed the frame to flex too much and caused cycling problems. It was retired. Link to comment Share on other sites More sharing options...
RocketCity1911 Posted November 8, 2013 Share Posted November 8, 2013 FYI...My frame has the slide stop crack. I checked with STI and they will not warranty that problem on the frames that have the extra reinforcement. They said it was common and would not get worse. However, my scope mount had cracked around the screw closest to the slide stop and they did replace it under warranty. Link to comment Share on other sites More sharing options...
robb315 Posted January 11, 2016 Share Posted January 11, 2016 (edited) . Oops. Wrong thread. Edited January 11, 2016 by robb315 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now