Jamese35

Give johnny glock a call or go to his Web page johnnyglocks.com and talk to him. He built my gen 4 34 trigger and it's insane. It's the best glock trigger I have felt and I've shot alot of glocks including Bob Vogels glocks and johnny trigger is best hands down.

Hey all I'm looking for some info on the zev pro pluss magwell as I have searched all over and can't finde anything. So first how do the gen 4 back straps need to be modified to work with the magwell, second with it fit in the idpa ssp box on a 34 gen 4, third will it work with stock 17 round magazines or do I need extended mags? And if the zev doesn't meat these requirements which magwell do? I'm looking for something that will fit in the ssp box and still have the biggest funnel posible with out haveing to spend a crap load on extended mags. Thanks all Jimmy

Lucas botkin from t-rex arms is cross eye dominant and has a YouTube on how he does it There is also a girl I shoot with that was told to shoot left handed because she was left eye dominant and she did good, but then we were messing around and had her start right handed wick is her dominant hand and had her just turn her head so the gun lined up with her dominant eye and that was it a hole new game for her. She shot better times about 30 percent faster .other then that I can't help much.

My glock groups great at 25 yards, in fact I'll shoot a 8 inch plat all day long at 100 yard with it. As for the 25 yard A zone, from what I tend to see in my area most people don't slow down enough to take a good sight picture on all the shots. You can't shoot faster then you can see the sights. The reason you do good on A zone head shots I'd because you know it's a smaller target so you take a split second longer to make sure your sights are lined up properly. It also helps to really learn where the A zone is so when it's covered be a shirt or at a longer range you don't have to look for the notches in the target.

I'm with you my 929 runs flawlessly and varry tight groups at 25 yards with my 160 grain bullets, and they are sized at .356

My dad did the same as zzt did with a day sp-01 holster. It works great and gets used ever Monday night. Just take it slow and test fit it often

It's not the crimp. It would only key hole in th tactical sport not any other gun. I took out all yhe Aguila brass and havent had a problem with them at all, and that's useing the same krimp as I had been. In fact it's putting them in a 1 inch group at 15 yards off hand. I took and backed the crimp off alot and no difference and then I started watching which brass it was doing it on and it was always Aguila, I took out all the Aguila and no more key holes at all.

I thought that at first to but both my g34 and my dad tactical sport have a 1:10 twist. Even my xd mod 2 4inch shot the 160s good and that has a 1:16 twist. I'm glad it turned out to be just a brass isue, we both really like the 160 grain bullets, and when people ask what are you shooting their jaw drops when I tell them that they are 160s lol.

Damn big fingers make it hard to type at times. Sorry lol

I swapped my front to a dawson .100. Just stay the same as the stock hight and you'll be good.

Well guys I went and played with the crimp and it didn't help. So I started picking up brass as we shot and noticed it was doing it on Aguila brass. So I touch out every loaded Aguila and shot them, every one key holed. Then I took a hand full of anything but Aguila and they all shot beautiful not one key hole. So the problem was brass, and my guess is that Aguila might just be thicker. Thanks for all the hell guys Jimmy

Thank you for your help. I will play with the crimp and see if that fixes it. And if it doesn't I'll drop down to 147s.

If that's the case why does my 929 shake the bullets out of the brass with a lesser crimp? That being sade I'm going to back the crimp off some and see what happens. The other thing I don't understand is why do they not key hole on any of my other 9mm I shoot them out of? I'm at a loss.

I'm running a Lee press with a factory crimp die, so basically a taper crimp. It works varry well for the 929 when dropping in that moon clip, nothing g hangs up they slide right in. And my 929 is a 9mm so it doesn't use traditional revolver amo.

The back story is last year when I started shooting revolver I had a lighter crimp and I noticed the my bullets were shaking loos, then I tighten the crimp a bit, then in a mtch I had one shake completely out of the case locking the gun up, so I kept tightening it until that stopped and that's where I left it. When I shot with Bob vogel he also told me to put a heavy crimp on my bullets to. FYI my loads shot out of his gun great too. I really don't see it being crimp because it's only dad's gun the key holes the bullets and it's just the cz his xdm runs them good aswell, but I also don't know everything lol that's why I'm here. Yes I slugged the chambers and they are almost identical. He also shoots some of my 124 grain bullets with 3.8 grains of tightgroup at the same oal of 1.155 and he has no key holes with them. And that runs the same crimp as the 160s. Both bullets are running at .356 in diameter.

If I reduce the crimp much more it tends to shake the bullets out of the case when I shout them in the revolver.

So here's the deal I am tuning through all my 9mm guns a 160 grain polycoated bullet with 2.8 grains of tight group and a oal of 1.155 and a pritty heavy crimp on that bullet. The bullet is shooting out of my glock 35 beautiful and my 928 revolver I mean they will stack them one on top of the other with no isues. Now my dad runs the same thing out of his cz tacticalsport and even now and agen he is getting on key hole on him. It's the same set of reloads that I run in my guns and I never have a key hole. So why is he getting them but I'm not? All of the key holes were in heavy cardboard uspsa targets. And they are traveling ate 820 fps at ten feat from the crono. Any advice would be great thank you Jimmy

Thank you guys for all the help. I've put about 5k rounds through the gun since I first posted this with no problems. I did put a johny glocks comp trigger in it and a jager products polymer guid rod with a 11 pound spring and they have about 4k rounds our of the 5k on them. The gun has been perfict and runs varry flat giving me an edge of the guys I shoot with and three of them are running sti dvc 2011. Thank you agen Jimmy

Thank you for the help. Jimmy

Hey all I'm new to the form and I have a few questions, I've serch ed this and can't seem to find the answer. I just picked up a new gen 4 34 and I noticed that when I dry fire and I pull the trigger then I start to cycle the slide, the striker is sticking out of the breach face. Is this normal? I haven't noticed any problems during normal live fire. I'm new to the glock platform and just want to know if this is normal. I have tried slow cycling when I live fire and the slide will get hung up on the next round. Any information is a great help. Thank you varry much. Jimmy P.S. the gun is all stock other then the vogel sights i put on it.