YellowShooter

i did that and didnt like it, i tried the pad at match yesterday and thats what i want, i will get a plugr I see that u like that raise comb lol There is a guy here that had an extra one... Look this guy up Tyro Shooter

Thanks for the info. I need to order a 4 & 4.5 # striker spring to try out with the 13# recoil spring then. The Zev Tech reduced power striker spring that I have that came with their Competition Spring Kit is listed as a 2#, so I don't think I wanna go that low & risk light primer strikes. The one in your kit that says 2.0# is about the same as a Wolff 4.0# spring and the 3.0# is about the same as a Wolff 4.5# spring. They are referring to the trigger pull using those springs when using the complete trigger kit. Oh ok cool. I'll give that one a try with the 13# then. Thanks! I just realized that we are running a similar setup! I just went tru 100 round of commercial 115gn, no failure! And both muzzle flip and felt recoiled was reduced. I am currently running: - Jager SS guide rod. - 13# ISMI. - ZEV Connector, Plunger and reduced Striker Spring. I like it!

@ Travtastik: See you there. Stages look to be fun. Absolutely! What Sqd are you in? @ bagdrag: =) Thanks!

Yup! =) Stage: Clearing House Went the wrong way, had rifle with muzzle pointed up, backed out, broke 180, DQ. RO, and other shooters didn't think it was unsafe, but I broke the 180 =(

Not so good... I am shooting again tomorrow in TN... We shall see So you didn't have fun? DQ? DQ!

Not so good... I am shooting again tomorrow in TN... We shall see

I guess you are never really done getting stuff... Added a 12Q from IP and 2 DAA Racemaster Pouches Removed the EZ8, pending a 2.8 from IP

YS, I keep an EZ8 on my belt as well....sometimes I miss a target....well, I miss a target often:) I think the EZ 8 is a good MatchSaver for me..... Actually... To make everything match I ordered a 2.8 from Kevin

Thanks! I had a buddy thats literally JUMPED on the trade lol

Got mine! looks awwwwwesome

Good to know!

$25?! Man this thing looks awesome! http://www.doublealpha.biz/ipsc-holsters-rigs/pouches/hoppner-schumann-speedmag-5cw Anyone had any experience with these? I currently run the Blade Tech double pouch... Meh I wanna to able to rotate them around! Other pouch I am considering: - Double Alpha Magazine Pouch RACE MASTER... 60 bucks tho, and I need some special spacer to fit glock mags - Double Alpha SINGLE STACK Racer Magazine Pouch... 32 but same spacer problem - Blade-Tech Pro-Series Competition Single Mag Pouch... 40, but why when I can get it done with 25! What do you guys think? Any other viable options? Thanks!

My thoughts exactly, if I won't see a whole lot of benefits and adding the potential for light strikes... It might not be worth it...

Awesome! Cool all I need now is the extended striker! That's the striker spring I got from Zev Thanks guys! Now my remaining concern is safety... Am I compromising anything with: - TiN plunger with lighter spring - 13# ISMI - Zev lighten striker spring - Zev Race Connector - Jager Guide Rod I'll start using various factory load from 115 gr to 147 gr. Eventually I'll tune it more with reloads

Why not keep the factory striker spring?

Good info! I started this thread because while doing my research I came across terms like "firing while out if battery"... Now that's not good lol. I forgot to mention that I also have the Zev plunger and I believe that it came with a reduced plunger spring. If I start getting light strikes I will get a new striker spring, reason is the 2# zev helps with the overall trigger pull. Now with your current setup what improvement or benefits are you getting out of it? I don't wanna be that guy that "upgrades" his gun just cause he can lol Thanks

As some of you guys might know I have recently acquired a new G34 Gen 4. The gun is strictly a range / 3 gun pistol. Since I have no intention to use this as a self defense weapon I am messing around with all the component I can get my hands on! Just to see what like best Here is the inquiry with recoil springs, the objective is to decrease muzzle flip and have a softer percieved recoil. I order a Jager captured spring guide rod with a ISMI 13# to start with ( again I have not clue what I am getting my self into ) but from general consensus and previous shooter 13# seams to be the appropriate starting point. This 13# will be used in conjunction with a Zev reduced striker spring (2# I believe) as well as the Zev V4 connector. I understand that in order to really tune the gun I will need to start realoading my own 9mm. However with the current setup will I noticed any improvement using both 115 and 147 gr factory ammo? Is there any safety/reliability concerns? Thanks guys!

=) looks cooool!

Damn it... And I thought I was special! He did the same to me. Kevin, hat off to you! great CS!!!!

The dot covered the 3" target pretty good (30%) at 100 yard, I would go with a 1 moa if I had to guess

Riiiight... How the heck am I supposed to measure that?!

@ Steve: what do you mean? @ Hayden: Yea I am facing the same problem... I got the MGM one... And it's crap at least for this lever. Can't get it tight enough, to much wiggling. I have one order the other one from Breakaway... We shall see. The one from PA is out of stock

.220" did the trick! Perfect POI/POA and the sights lines up!

UPDATE: DONE! for now... See you guys tomorrow in ATL!

Hummm You can get some stuff at Adventure Outdoors. Huuuuuge Gun store. You probably can get most of your stuff there.