Hunter413

Following in order to hear response about tac heavy pistol question

I use a 15lb mainspring in my still and tul primers... works fine

Running a Dillon 650... steps to adjusting the primer seating depth?

Great match with a good mixture of every aspect. I can barely maintain an enos acct and now I have to go to arfcom! WTH

I snagged 10k of these and have loved them

Appreciate the help guys

This certainly helps as well... I had soaked my slide in my ultrasonic and think it was an issue as well. Still sticking to the federals for the match but practice ammo has been more consistent since I replaced the striker channel and applied the carb cleaner

This is why you have to combat roll!!!

Problem solved problem staying solved. Purchased 5k Federal primers for match use and using the Tul primers for practice ammo. My malfunction drills are going to be AMAZING!

I've got several brands because over the years I have ordered a couple of different kits trying them out. Stock firing pin and spring wouldn't work either.

Took my brand new firing pin assembly out of my G17 that has maybe 100 rds on it and plugged it in and it still wouldn't set them off. Bought a new channel liner but haven't tried it yet.

No- but for us it is a limited ability match. 6.2 Standard Division 6.1.1 Capacity restrictions: a maximum of 9 rounds can be in the gun at the start of a stage. After the start signal there are no capacity restrictions.The man with all the answers! Loving this since I just got my new VMAX from Crucible Armament and it has the new couplers from Nordic Components!!!

Anybody know who the camera guy was that was following around squad 9? I got absolutely no photos of my best major match ever... :/

Should have asked you yesterday but it slipped my mind. Is there still tac ops slots open? I sent my reg in but haven't got anything back. I assume it is because you have been 2000 miles from home all week but just wondering. Thanks man

That Taran guy is a pretty spiffy shooter And still keeps great hair even in 50mph desert dirt winds

The accuracy is better with the gen 4 but I found the beaver-tail to be more of a novelty than a help. See if you can borrow someone elses for a day before jumping in. A gen 3 is cheaper and there are more parts for it.

I purchased 20k tula small pistol primers last year and although my 2011 Edge runs them just fine I have literally hit a wall with them in my Glock 34. I purchased the glockworx ext firing pin and have tried everything from 2-6lb striker springs in it and still can't get them to pop consistently. Am I missing something or should I just save em for when I acquire a 2011 9mm?

I do it because I love it but I can continue to do it because I've got some help along the way and can turn some coin by doing well at big matches. Do I sell everything I win? NO, but does some of it go back into gas, hotels, food, and most importantly ammo you betcha.

I don't even eat cracker jacks but this is sound logic!

In 3 gun its pretty limitless minus optics and ports or comps. I suggest a trigger, grip tape, fiber optic sights, mag extensions, and a whole lot of ammo for practice. The gun will likely go a lot further than most anyone can push it in near stock form. Get your moneys worth with practice.

It is from years of reading left to right. I am right eye dominant but prefer to shoot right to left because I shoot with both eyes and this allows the larger field of view to pick up targets faster. My right eye is obviously looking down the sights which leaves my left eye to pick up targets as I swing. Maybe that makes sense and maybe it doesn't. Best thing is to try it and see on a timer and then you will know which way you prefer.

I have been long term "borrowing" a friends vmax that has one on it and have put close to 2k rounds through it and literally thrown it at every dumb barrel I have seen and haven't had a problem. Negative side to it is that the gun only holds 10 with the lancer ext. and I prefer at least 12. The vmax I am having built now is coming with the new Nordic Components couplers so that I can modify my tube at any time if I see fit. For example shotgun only stages or stages where I don't dump the shotgun I could hold 16 if I wanted to get nuts. If round count doesn't bother you than go for it because it definitely holds up.

Kevin at Invictus Practical by far has the best customer service imaginable and he has every intention of keeping it that way. If your not happy he is not happy. To address some of your concerns the IP caddies do have a very sturdy metal backing that can be bent with quite some force to mold it to your body line. This isn't a bend that is going to move every time you go prone either. In regards to the "yard sale" effect that some caddies have it is a non-issue with the IP caddies. I am very athletic and what I lack in shooting skills I try to make up for with moving quickly on the range. I haven't lost a shell yet from just moving, running, squatting, etc.. I did lose some once when someone decided to put a dump barrel IN MY WAY haha. Well the dump barrel won but that was my own fault. The consistency of the grab on the shells as well as the ease at which they come out actually surprised me because like I said before they don't "yard sale." It is an investment but as you said before the IP caddies can be used for load two or quad load. They also offer a load two only line of caddies if you are certain that's what you want. I have a 6d that i wear on my weak side as that is how i load weakhand and quad strong hand. So even then it may still be useful later on. Hope it helps...

Any updates on this combo? About to load some 147 xtremes with 3.1 grs of clays behind them. I've been running wsf behind them but am wanting better accuracy and haven't been able to find it with this combo.

The ejector isn't the same I know for certain.