GJGary

The best to clean moly out of a barrel is MEK. Never had a lead problem because the bullet to barrel was always sized right.

I have only used 4 small pistol primer manufactures and this is my cents worth. Listed softest to hardest. Federal Winchester Tula CCI I would get an extended firing pin from CGW of CZ Custom and then you would have a much less problem.

Hopefully tomorrow my 3500 125s arrive

Add a ultra-lite kit (springs and extended firing pin), SRS and the new disco (which I will install today) to that hammer and you will be happy.

Standard Berry plated bullets recommends not exceed 1200ft/sec. The Berry's HBRN-TP or HBFN-TP can do up to 1500ft/sec.

I really like 7625. Percision Delta 124JHP 4.45gr 1.090 OAL 1048ft/sec avg 129pf precision Delta 124FMJ 4.55gr 1.135 OAL 1058ft/sec avg 131pf

You need to slug your barrel (youtube has videos on how to) Then get your lead .001 to .002 bigger. Dardas has a slug you can buy and some nice options in weight and size. My CZs are.355 and .3555 so I like .357. My friends older 75 is .356 so every one might be different.

Just sell the titegroup! Which is probably going to happen when you try the n320.

The Precision Deltas will do under an inch at 25 yards out of either of my open guns. The PDs are my #1 bullet but the HBRNs are gaining ground and my CZs love them both. Just got out the sample pack of PDs, HBRNs and Rainiers. Should see them Sat. Have fun.

I have some Percision Delta 124JHP and some Berry's 124HBRN-TP that I could send you a sample pack. PM me your address. I really have no interest in the 147s.

Powder weights give me piece of mind and worth every penny. I have a rcbs 5 10 and love it and to be able to throw a powder check weight on it is priceless.

agree the Bayous are good but unavailable for the forseeable future. get the BBI's if you need bullets soon. Looked into Bayou months ago but impossible to get so I am looking for a more reliable source of available bullets that shoot well. Percision and BBI seam to be around 7cents for a 9mm projectile bought by the case.

Thanks that's what I was looking for since the Percision 125gr bullet loaded a little short for me. I drop check every new bullet and -.010 in oal I load so I make sure that they never engage the rifling.

Does anyone have experience with both of these? I have shot some of the Percision 125 molly and would like to know the difference between the 2 of them good and bad. Do they load to the same OAL, smoke more or less and any molly build up? I am trying to avoid buying 500 from BBI to find out. It looks like the BBIs might load a little longer(OAL) Thanks

I also like plated bullets and don't have any problems with them and Berry's Hollow Base Thick Plated bullets are running better than most of my jacketed bullets. They are my most watched list since I can't have enough of those Berry's.

Power Pistol and it will sound like you are taking a third world country over......

Ordered my 124jhp on 2/5 and received today also. Very happy.