fellas

Hi how are you guys now i decided to upgrade my gun for IPSC production for sure. I use a glock 17 gen 4 and i noticed that the gun without any minor upgrades is not made for this division . with CZ and Tanfoglio as two major gun makers for IPSC production i am looking at these guns . Here in Malta CZ there are a lot which i shot one of a friend of mine with very minimal recoil and the advantage of changing the springs of the gun and still be legal like recoil and main spring . with the stock 2 there is no one that has it but about handling i can get a Limited pro which has the same frame without the dust cover but the problem is with the trigger, with light strikes and the gun get expensive when you start changing sears , firing pins , hammer so what is your opinion thanks

i don't own a stock 2 but I'm looking forward to get one. here in Europe the stock 2 is getting more popular than ever with top shooter using it in production division. As for loads on Italian forums i read a lot using the stock 2 with heavy bullets like 145gr or 147gr with N 320 with 3.4 -3.6 1.135 COAL this si of what i read might be helpful

I am looking to upgrade my mag pouches for glock 17 . i have the safariland 771 where yesterday when doing some training my mags fell off (explained this in another tread). I can get the hoppner and shuwman 5cw with tek lok which are very reasonable priced or the daa racer pouch. Do the tek lok take many space on the belt and result in not too much Velcro to hold the belt with the mag pouches full and with the DAA pouches ,how they fit with glock mags , and though they are a little bit tall will there be space to grab the glock mags thanks for your help i would like o see some pics if possible thanks http://www.doublealpha.biz/ipsc-holsters-rigs/pouches/combo-4x-racer-pouch http://www.doublealpha.biz/ipsc-holsters-rigs/pouches/hoppner-schumann-speedmag-5cw-3-pack andre

i did 3.3 n 320 1.135 oal with average 132 power factor in glock 17

I have these mag pouches but i have a little problem with the retention screws , they are getting loose all the time and when i screw them in they are hitting the belt holder and tearing it up are there any mods , should i change the pouches to other ones thanks andre

As here we dont have US made powders i thought i share mine , sorry for my input

4.2 n 320 coal 1.125 4.7 n 340 coal 1.135

is the first powder Vecatn AS please?

check the strenght of you reloading bench . what i did is i bolted the bench to the floor so i have all the strenght possible, because the flex will slow you down with inconsistent in result in OAL and keep the same storke when handling the press. this is my 1cent help that i can offer

how are you guys , i am looking to upgrade my glock 35 for ipsc standard major (170 PF). what guid rod do you use and what weight are the springs. thanks

i wish that in ipsc production you can shoot the glock 34 , in ipsc only the g 17 is allowed due to the slide cutting and barrel ;lenght , but then you use 2000 euro guns tuned to the perfection. how pathetic

i dont know about uspsa but in ipsc production you cannot change anything that why glock is not so popular in ipsc but ius still a world champ because robert vogel won the ipsc world championship in greece with a glock 17

thanks for your great info guys i think it obvious that i get the trojan thanks to your helpo thank again fellas

I am looking to get my first 1911 a reliable one to shoot some ipsc classic price tag is the same for which one you opt thanks

thanks guys for the input now there way to color coats lead bullets and i think they eliminate the lead bullet feeder problem here the link to color coating lead bullets this guy is great with so many reviews

i like to get Hornady reloading items and recently i acquired a Case feeder. when it working good the LNL splits ammo like a champ but when the cases start falling it's a nightmare i 'll be more fast without it . the other thing is the cases jamming with the spring not getting into the shellplate did hornady address these problems what are your tips guys thanks andre

3 gun sweden what you think of the OA M1 have you any experience and do parts interchange with US made AR 15's

Toady i had the pleasure to shoot my new g 17 i shot about 400 round with no failure to eject except some light primer strikes the primers are cheddite from italy . my load was 4.4 n 340 with coal of 1.,142 (still have to chrono)very nice recoil with shot all on a n Alpha of an IPSC target . any suggestion on reloads will be gratefull using n 340 this will be used for ipsc production thanks for all the great info found here

I am from Malta europe JP rifles are very expensive and here no one imports them thanks

Hi guys i was reading this post and now i have the same problem i am looking to get a rifle for some ipsc shooting nothing professional , as you know US made rifle are very expensive here like JP rifles , i am looking for an Oberland Arms the M1 Bull barrel or the Schmeisser Ultra Match what are you thoughts on these rifles i read on this post that the Oberalnd Arms broke during a match any suggestion will be grateful thank fellas

hi guys i normally use n320 but there was a shortage and i had to buy n 340 i normally load 124gr cast 4.1gr n320 oal 1.135 which is a very nice load but now i have n 340 i have the vv loading data but i like to see you guys what are you using thanks

thanks guys

On signal engage targets FOFS as they become visible WHAT IS IT

hi guys any one use one of these what is the difference between them i planning to use it for ipsc production with a glock 17 thanks afellas

as the title says anyone shoots standard division minor thanks fellas