fellas

Go for which one you like both are great guns to shoot. The blue one has ticker grips than the old Limited Custom and also more heavy on the front of the gun.

Regarding the ignition problem with all tanfoglio are the following through my own experience 1) Primers need to be seated deep , (this is main problem ) 2) Firing pin block safety touching the firing pin itself (try removing the fps and see if you have any light strikes if yes it's problem no1) 3) Light springs with hard primers With 15lb springs hammer it should pop every hard primer so before spending money buying stuff you dont need just do these steps I shoot a stock 2 for 5 years with factory parts, no extreme, no domina and trigger is super fine everytime, but mostly rule 1 applies

I will get tanfoglio springs as wolf spring are not so ready available in europe. i keep you posted , thanks for the reply

Last week i had a problem with the stock 2 not extracting at a competition using factory ammo. I use reloads for my training LRN 145 gr with pf 132 coal 1.136 and shot quite a lot before the match without even a hiccup. At the match the first stage was ok but the second one had a couple of stops ruining the stage and the third one had to stop . the issue was sort of double feeding , cleaned the mags tried again did the same then i changed to the stock 3 and work flawlessly . Ammo was factory Selier and Bellot 124 gr. what could be the casue thanks andre

agree 147 lead rn bullet with 3.5 n 320 coal 1.136 fps 910 922 922 905 924 920 hornady lnl ap

yes that's it,

i had the same problem talked to tanfoglio directly . Christian bonomi whos is in charge of team tanfoglio replied with a small modifiaction to the factory interruptor i will attach everything here so everyone can find it useful hope it helps setup disconnector.pdf

seat the primers well and remove the fp safety , it should work like a clock

thanks for the review

have to agree tanfoglio runs great with factory hammers and 1 piece sear . both my S2 and S3 are factory with just minor polishing , just shoot them as they are

Hennings i don't know but sure thinner than both wooden grips but slightly wider than the EG

yes it's the unica , it sits straight with great aggressive grip on the gun unlike the RHT and old tanfoglio one's with the thumb touching the slide. I think you can order directly from eric grauffel https://www.ericgrauffelonlineshop.com/en/thumb-rest-/101-thumb-rest.html?search_query=thumb&results=7

If you want to fit the safety just take material from the bottom , do not over do it otherwise it will not function To test it hold the trigger back and lower the hammer until it starts engaging , and with a punch push the firing pin slowly feeling if it's moving flawless, if you feel it touching continue removing material from the bottom. if you want the avoid all the hassle, just remove the safety it's legal in IPSC and put the extreme 2.0 hammer . With extreme medium hammer spring and light firing spring no issues with worst primers like Fiochhi and S&B

Try the new one from tanfoglio it fits perfectly , a friend of mine got one and it's an absolute on the gun, the grip on the gun is more aggressive with the thumb rest which leads to perfect recoil control

know a guy that has 80,000 on a stock 2 without changing nothing ammo was reloaded to pf 132, at least that what he said and i believe him , mine has 30,000 reloaded cleaned maybe 7 times run like a champ

Try RN bullets

prefer grip on the stock 2 , but both good guns can't go wrong with both of them

It's the older version of the limited custom , still with a bull barrel but without the slide cuts, the one after this has slide cuts and the newest version tanfoglio change the cuts one the slide , enforced the the frame and even changed colour hope it helps

It feels smoother than the Normal Hammer and EXtreme Delta Hammer?

so fitting a titan on a stock 2 is tricky ?

keep us posted on the unica springs please

i have the same problem on the normal stock 2 , all parts are factory , should i do the same procedure to eliminate the problem ? thanks for your expertise on the matter

i had a discussion on facebook on the STOCK 2 group regarding the new hammer but the comments were deleted, i asked what is the difference from the TITAN and if it can be used with 13lbs spring without having misfires, but the answer was no, also the guy said the DA and SA had good improvements over the first extreme hammer , hope it helps , looking forward for a detailed comparison between titan and unica

nice write up welldone

i have both , and what i can say is that with right loads theyl shoot flat , i run the stock 3 with a pf of 135 145gr LRN and 10lbs factory recoil spring and shoots super flat the stock 2 with a pf of 130 145gr LRN and 10lbs factroy recoil spring , but the grip is the most crucial thing when shooting fast in my opinion hope it helps