trip5466

thanks

So my fairly stock M2 that has never given me problems has finally got one. The final shell in the tube is coming out onto the carrier and not lifting into the chamber. I have to tap on the bottom of the carrier and it lifts with little pressure. I have a 9 rd tube and I changed the extension tube spring to one with more pressure since intially the rounds were sticking 1/2 in the tube and 1/2 out on the carrier. I have also cleaned out the recoil tube assembly but did not change the recoil spring. Help me out Thanks Trip

Maybe a stupid question but are squads posted? Thanks T

I am trying to get my Race Master mounted on my ELS belt. Any suggestions??

cool...thanks!

Did you figure out what classifiers you are going to run? Thanks Trip

Quick Question without reading thru the last 27 pages- Is paper IPSC or IDPA?? Thanks T

Great...thanks!

So I am moving up north and wanted to know if there was any clubs or matches up there in/around Newport Rhode Island. Thanks Trip

I am trying to track down either and extended aftermarket mag release or a stock one for a GEN 4 G22. Got a little to frisky with a dremel...it happens... Thanks Trip

Anyone know the shipping address for ammo at MGM??

Is Squading posted?

I need a rear sight for an 1100 tac. I have seen the Hi viz rears but do not know which one to get and I would like to get something a bit more sturdier. DON'T JUDGE ME T

I did the same thing Bigbore did and it works great...especially if you want a pistol grip. I recommend taking your recoil pad off and putting a piece of Starboard( can be found at a boating supply store) on there in its place. It is 1/4" deep and you can form it to fit anything. It is hard but the recoil does not bother me on a SLP. Additionally it is nice having a hard thin recoil pad that does not catch on your shirt. When cutting the Stock as per Mike 45's directions cut the rear of the trigger assembly hole first before you fit the back of the receiver plate. Good luck

I just installed the Nordic round button extension on mine. Pretty easy just drill and tap a whole but cut 2 threads off the bottom of the screw to make it work. Mine would not release shells with the whole screw.

thanks

Not to be a total cherry but you wouldn't happen to know a part number for Brownells do ya?

So I am getting my thumb ripped apart on my weak hand load with my lifting gate on my SLP and my SX3. I tried the mod like TRUBL and it is kicking my butt. I checked out the T.E. Kelly link and saw that he took down more but when you take down to much it causes the shell to hit the top of mag tube and get hung up. It looks like TE Kellys SLP has a another little piece of metal to stop this from happening. I talked to a pretty savvy guy at MG Nationals this weekend and he did the same thing and had the same problem so he had to dremel(ever so lightly) the top of the mag tube to round it off. Does anyone know where to buy more lifting gates, that I can start over with, that I can tig wield it like 00BULLIT. I definitely think this is the way to go for those of us with fat thumbs. Thanks

Also, 20" barrels usually perform better with cans since the shorter barrel's harmonics are not as effected as much as longer barrels so you should have good grouping with your LTR.

Getting a can with a solid compensator is the way to go. You don't have to worry about screwing up the threads if you plan on taking it on and off alot. I recommend Surefire- my shift is negligable and the break is great without the can...the only way to go on big bore! Additionally, the Surefire shift(very small) remains constant when you take the can off and put it back on. That is data you need if you are buying a can. Some cans impact shift changes everytime you take it off and on...guys on military long guns and the associated cans see that alot.

Benny- Question for you from a shotgun novice...Is the muzzle flip more with a high comb or a low comb? The standard FN stock looks like it has the same height and the remington 1100 looks like it is lower?

BTW, I saw a PG that fits a winchester 1200...will that work???

Sweet...I appreciate it