-
Posts
643 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by T Bacus
-
-
Very slick rig! Why are you going to convert it to 9mm? Does 38 Super make major PF?
I have an unendng supply of free 9mm brass. Major is not an issue because I'll never shoot the gun in USPSA, only ICORE and Steel Challenge.
-
If they made 500, at least half are at the IRC every year! (Nice gun, but not super rare.)
Mike,
Is this your endorsement for me to run my clymer 9mm finish reamer down mine?
Lee
I will be opening mine up for 9mm. I just got the Hogue big butt grips I ordered for it and will be putting a C-More on it when the mount arrives. I plan on making a better comp for it and then trying it out in a few matches next year.
As for super rare, that would be the 929!
-
I'm not sure what I'm looking at...... Can you give me some details?
S&W 627-4 8 shot chambered in 38 Super. Performance Center model from 2002, they made around 500.
-
Couldn't find a 929 so I had to settle for this...
Oh well, for $800 I guess I did ok. I think I'll play a little ICORE next year.
-
Not to mention a short fore end with no way to change that I'm aware of. I thought they operated on the same inertia system and similar weight of an M2, why would there be less recoil?
Believe Vinci is gas operated, hence lower recoil.
Nope.
-
We will all be up again this year. This is one of my most favorite matches all year!
-
if it looks stupid and it wins, it isn't stupid
But it still looks stupid
-
If you already have a Magpul BUIS rear sight why not buy the matching Magpul front sight? Magpul BUIS front sights cost around $40.
-
Compensators on rimfire steel guns are not about reducing recoil for fast follow-up shots. They are about cleanliness of dot movement during recoil.
-
! watched one incendent on stage 2 where two of the RO's corner a shooter who disaggreed with their calls and wouldn't let him get a word in edgewise and raised their voice while he kept calm.
I worked stage 2. We made LOTS of people very angry, I don't know which specific incident you are referring to, but it is also possible I missed it completely because I mostly downrange holding the timer or scoring and I referred all issues to the folks at the top of the hill and the CRO.
Believe me when I say that we were not happy about it, and in no way were we trying to be mean to anyone but I've been personally accused by one shooter of trying to ruin his match because I didn't warn him his feet were outside the free fire zone while he was shooting, another asked for a reshoot because the dust from me walking behind him interfered with his shooting as if I had any control over the dust and is just a sample of the type of issues raised. I'd bet 10% or more of the shooters were unhappy at us.
I think a lot of shooters were very frustrated on that stage due to the dust, hard to see targets, and the VERY heavy back target. It felt pretty crappy to make that many shooters unhappy, but we just tried to run the stage for everyone the same way and call the targets the same for everyone.
A big thank you to the Noveske shooters who stayed behind at the end of the match and helped tear down our stage. You guys know who you are, and you rock.
The only complaint I had with stage two was how poorly I shot the rifle tarets. The RO's were nothing but friendly and as helpful as the rules allow. You guys did a great job and as a competitor I appreciate it.
Thank you!
-
Put a magnet on it, if it's s/s it will stick. The color could be from heat treatment and they didn't bead blast them back to a natural stainless finish.
-
Here's mine. I have not put it on a scale so I don't know the weight.
-
So perhaps the ultimate match would be nine stages. One all pistol, one all shotgun and one all rifle. Then three option stages were the competitor can choose what gun to engage what targets, and three stages with no options, shoot the targets with the guns required in the stage description. The question is, would a match with something for everyone make everyone happy?
-
Hard chrome is an exceptionally durable finish.
I thought that eventually hard chrome will have issues with the underlying steel. That is why you don't find many surviving chrome plated 19th century pistols on the antique market. On the otherhand I would be buying with the idea of wearing the pistol out in my lifetime, not to be some sort of heirloom.
The pistols you speak of were not finished in hard chrome, they were nickel plated.
-
What Pat said.
-
very nice, but beyond my abilities My grandson would probably like that. we will see
Madd Mac's offers a similar bolt handle with installation for a very reasonable price.
http://www.maddmacsprecisiontactical.com/2245-parts--accessories.html
-
The answer is really not all that difficult. There is no reason you cannot allow the competitor some choice in how they choose to shoot a stage, so as to play to their strengths, while at the same time insuring all firearms are used. Require that all paper targets may be shot with rifle or pistol, all steel may be shot with pistol or shotgun and clay targets must be shot with the shotgun. Then put plenty of all three down range.
-
My Briley bolt handle broke at the Colt 3 Man 3 Gun. Being that I was pretty pleased with it's performance for the two years it was on the gun I ordered another one.
-
FYI
They now make one that screws into claw piece and attaches without any drilling & taping. Haven't tried one yet but it looks like a great idea.
http://www.tandemkross.com/The-Challenger-Ruger-MK-III-and-2245-Charging-Handle_p_110.html
If you re-read the first paragraph you'll see I mention this.
-
Don't mean to high jack, but I'm curious about thicker 22/45 grips. Anyone have suggestions? I'm fairly new to this "open" .22 concept, but I have the TS Comp because that's what came on my gently used TS upper. I like it except for the grip being a little on the slim side compared to my 2011; I would like the 22/45 grip to feel a little more similar.
Any 1911 grip panels will fit on the 22/45. You will just need to trim them a little around the slide release. My gun has a set of VZ Operator II's on it and I like the extra thickness.
-
I won a Tandemkross slide racker at the Maryland State NSSF Championships. Up to that point I had never really considered adding a slide racker to a Ruger because most of the ones I had seen stuck out to the side and I don't like that. I liked the looks of the TK unit and the fact that it stuck out to the rear rather than the side. What I didn't like was the adapter that allowed you to attach it to the gun. Now the adapter is necessary to allow the racker to be installed without gunsmithing, but for me, I was much happier with the idea of just threading the back of the bolt and installing it directly, without the adapter. Now I have never done any work on a Ruger bolt but easy, right? Not!
First hint of a problem, I located dead center on the back of the bolt and hit it with a sharp punch to mark the center. Result, a little shiny spot where the bluing rubbed off and a flattened punch. Ok, plan # 2. Take the bolt and mount it my milling machine, then use a High Speed Steel Center Drill to mark the center of the bolt. Result, slightly larger polish mark and a ruined center drill. The Ruger bolt is the hardest piece of steel I have ever tried to work on, so time to go to war! Plan # 3. I plunge cut the bolt with a 5/16 carbide end mill. After cutting to a depth of about .050 I finally hit soft steel and cut a hole through the back of the bolt. Since there was no way a drill bit or tap was going to make it through the hard outer skin of the bolt I then counter sunk the hole to a depth of .050 with a 3/8th carbide end mill. This the allowed me to then drill through the back of the bolt with a P drill and then tap the hole with a 3/8-24 tap.
End result is this...
I'm happy with both the looks and the function, but what a pain!
Since I was in a hole drilling mood anyway I decided it was time to address the last issue I had with this gun, the fit of the upper. I have a black Tactical Solutions upper that is a very nice fit on this frame but the pink upper is very loose, loose to the point that I can feel it moving around as I present the gun from low ready. Because I had decided that this lower was now going to be a dedicated open steel gun I wanted to fit the top and bottom to a movement free fit. There are several ways to shim the fit but what I didn't like about them was that they fill the space between the upper and lower, creating a tight fit by forcing the top end up and away from the frame. I wanted to draw the upper down into the frame the way it's suppose to work. So rather than shimming I drilled a 6-48 hole down into the top of the lug on the frame to tighten the space under the lug. This way when the mainspring bolt is installed it pulls the upper back and into the lug, forcing the upper down against the lower. Fortunately the lug was very soft and drilled and tapped easily. The upper is now tight against the lower and as an added benefit the lack of wobble dropped my trigger pull another 1/4lb.
So this project is done. Good thing I just picked up another 10-22.
-
I am currently using the Tandemkross comp on my 22/45 and have been very pleased with it's performance. At the Maryland State NSSF Championships last month I had two RO's tell me my gun was the first one they could really feel the blast coming off of the comp.
My review of the TK comp from the Steel Challenge forum...
-
Helps if you do this to it...
-
Front sight was slide mounted. I no longer have the gun. It was a Detonics Scoremaster frame with a Colt Gold Cup slide and Detonics 6" bull barrel. This was my first competition gun. Slide was replaced a couple of months later with a Detonics slide and the barrel was shortened and a compensator added. I sold the gun in early 1986 to fund my first 38 Super.
ambi safety that does not loosen for 2011
in 1911-style Pistols
Posted
I have been using this safety from Wilson for years. The quality is great and I have always been pleased with how they fit the frame. I've used them on both single stacks and 2011 style guns.
http://shopwilsoncombat.com/Ambidextrous-Thumb-Safety-High-Ride-Blue/productinfo/423B/