Tom D

There seems to be a little confusion, there is not a 22 rimfire class because of the knock down steel part of the match. This is not 2 matches, it is one match, 24 stages for the price of $125 Thanks Tom

Hi Keith, This is not USPSA so we are going to use ICOR revolver stats. Any Revo without a scope or optics is limited. I think 7 & 8 shot pistols should have a place to play. Later Tom

DMW_STEEL_500.pdf I am happy to announce the Drazy Metal Works Steel 500. This is going to be a 500 round steel match that has 12 stages of steel challenge type corses, and 12 field corses designed by Ray Hirst. It will be shot in 2 days with a prize table at the end of the match. The dates are May 30 and 31.The location is PASA Park, Barry IL. If I did it right the application is at the top of this post. If you have any questions, you can email me or Ray. Tom Drazy Tom@DrazyMetalWorks.com Ray Hirst Ray.Hirst@sbcglobal.net Thanks Tom

I think this is a typo, thoes dates are a Sat, Sun, and Monday. The dates are when it was in 2008 in San Angelo. I talked with Ken yesterday and he had not picked a date yet. Later Tom Drazy Black Bullets International

I don't have nothin' to do with gettin' you in, Butch--I'm shooting it myself. Probably not well, but what the hell. Come on down and bring some Turley! Troy Hi, I at set up right now and there is room for at least 15 more shooters. Walkups are welcome but the MD asks that you register on Thursday night at the match motel instead of at the range on Friday morning. Squad selection would be limited. The match motel is the Rodeway and the number is 318-747-2400. Thanks Tom Drazy

I have been shooting 180 gr Moly's at minor about 139 pf, using 3 gr of bullseye, loaded at 1.12, very soft in my SS40. Low smoke and very accurate! Tom Drazy

Hi, There were about 6 or 7 calibrations this year. Mostly on stage 13. I put a new design of a forward faller on that stage. It is ajustiable for calibration. If it was edge hit or low hit, it did not fall, but everytime it was hit in the correct place, it worked fine. To my understanding, it did not fail once in either match. By the way, I have repaired EVERY popper that belongs to USSA on the range at least once, most of the more than 5 times. I have been the "Mr.Fixit" for the last 5 Natoinals on this range. Shotguns bend the latch over easily, we had to hammer them back into place after just about every squad. We have ground, bent, hammered, or welded just about everything we can. There were 4 poppers on the range that I did not have to work on, I brought 2 and there were 2 from Max Davidson, (Maxco) that worked. Thanks Tom Drazy Drazy Metal Works

Hi, I am using the same coating prosess as did Masterblaster, we recently made some changes to our website, and will be able to order from it very soon. My own loading shows that the bulles will run about 80 to 100 fps faster than jacketed. My steel load for my 40 was 4 gr of bulseye with a 180 zero, it made 139 pf, I had to drop the load to 3gr with the 180 coated to get down to the same pf. Thanks Tom Drazy

HI, We are working on the web site. We should have the on line ordering up this week. We have only been in buisness about a month. The main reason we have not been advertizing is that when we bought out Masterblaster, Tom had already sold the bullet molds. I was waiting untill we had them all. I have been trying to by new ones, but the mold maker (Magma Engerning) is backed up more than 1000 mold blocks. Currently I have 180, and 200 gr TC 40cal, and the 200 gr rn bullets. To get in touch with my buisness partner (Tony Capers) his ph# is 612-328-3311. He is taking care of the orders and doing the shipping. As the new molds come in, I will post it on this page. I am going to be at Nationals in Tulsa. I have to leave on Saturday. I am on set up. I will have a table at the vender tent. Email is the easiest way to get in touch with me, mine is Tom@DrazyMetalWorks.com. Tony's is Info@blackbulletsinternational.com. Thanks Tom

Hi Doug, Sorry that it is the same weekend as the match in CA, but it was one of the only weekends we could fit it in. We figued that not a lot of shooters from the midwest were going to another country (California ) to shoot. Good luck at the match Doug! Tom

We are planning on the original 8 stages plus 3 or 4 more stages. Tom

I am pleased to announce the PASA Open / Midwest Steel Challenge. The fee is $60 for either match or $100 for both! 11 or 12 stages of steel!! 9 or 10 stages of USPSA including the dark house!! Shoot steel on Saturday and then a USPSA level II match on Sunday. Match Name: PASA Open / Midwest Steel Challenge Match Type: Handgun Approval Status: Pending Starting Date: 8/16/08 Ending Date: 8/17/08 Location: PASA Park, Barry, IL Range Master: Ray Hirst Match Director: Ray Hirst Contact: Ray Hirst Phone: 217-228-0428 Email: Ray.Hirst@GradnerDenver.com Web address: http://WWW.PASAPARK.COM Fee: $60-$100 Additional info: Go to WWW.PASAPARK.COM for match registration. Match Level: Level II Thanks Tom Drazy Tom@DrazyMetalWorks.com

Very Cool!! I started using Airsoft last winter (our range frequently closes because of berms frozen solid with ice). I've moved on from the obligatory HG to SG and M4 also (FA Airsoft is about as much fun as you can have without a Tax Stamp ). Love the looks of that Table Top rack with the 1/3 Poppers...can you tell me the overall width? Thanks in advance, CZ52' Yes I can, they are 36" wide. The plates are 6" on center. Tom

Very Cool!! I started using Airsoft last winter (our range frequently closes because of berms frozen solid with ice). I've moved on from the obligatory HG to SG and M4 also (FA Airsoft is about as much fun as you can have without a Tax Stamp ). Love the looks of that Table Top rack with the 1/3 Poppers...can you tell me the overall width? Thanks in advance, CZ52'

I believe Drazy will be the Range Master. Not sure on exactly who the match director is yet, but I'm guessing EB. Chris Davies will be the MD, I will be the RM Tom