bigboy69 Posted April 3, 2017 Share Posted April 3, 2017 (edited) Does anyone have any load data out of an open gun for 9mm? Can you please post if you barrel has popple holes etc. Thank You Im sorry Im talking about the 135g Blue Bullet Edited April 4, 2017 by bigboy69 Link to comment Share on other sites More sharing options...
teros135 Posted April 3, 2017 Share Posted April 3, 2017 Who uses 147 in 9 major? Anyone? Bueller? Link to comment Share on other sites More sharing options...
Slostang Posted April 3, 2017 Share Posted April 3, 2017 K.C. shoots 147 major but he is the only one I know of shooting it with regularity. I've loaded some up to play with after talking to him about it. I used plated bullets but coated should be roughly the same. 7.0gr of 3n38, 147 plated HP, CCI SR primer @ 1.165OAL. Avg velocity for me was around 1170fps. Recoil pulse and sound is different for sure but very soft in the hand. 5" barrel with 3 small holes. Link to comment Share on other sites More sharing options...
glocklover Posted April 3, 2017 Share Posted April 3, 2017 I shoot a 147gr black bullet with 6.4grs of VV3n38. It easily makes major. It's nice and soft shooting. I shoot a Glock open gun. Link to comment Share on other sites More sharing options...
bigboy69 Posted April 4, 2017 Author Share Posted April 4, 2017 (edited) There were some people talking on here that were going to try it on their open gun with the 135g Blue Bullets. Edited April 4, 2017 by bigboy69 Link to comment Share on other sites More sharing options...
andersonj55126 Posted April 4, 2017 Share Posted April 4, 2017 On 4/3/2017 at 1:40 PM, teros135 said: Who uses 147 in 9 major? Anyone? Bueller? Muneki Samejima uses 147 FP Berrys for 9 Major Link to comment Share on other sites More sharing options...
Steelix Posted April 4, 2017 Share Posted April 4, 2017 I used 135gr when PF was 175, 38s 135gr, 8.9 of HS6 will be 188pf. I did use the rest up after pf came down and was loading 8.5 of HS6 but that's 38s. Link to comment Share on other sites More sharing options...
echotango Posted April 4, 2017 Share Posted April 4, 2017 (edited) 4 hours ago, andersonj55126 said: Muneki Samejima uses 147 FP Berrys for 9 Major I shot his load thru his gun and mine. It is a nice load. If I remember correctly, it is with cfe. Edited April 4, 2017 by echotango Link to comment Share on other sites More sharing options...
al503 Posted April 5, 2017 Share Posted April 5, 2017 I've been doing some experimenting with 135 x-treme HP bullets that I had lying around. 8.15 grains of 3n38 at 1.2" got 168 from a 4.5" bbl with 4 small bbl holes and 169 in a 4.5" bbl with no holes. 9.4 grains of AA7 got about the same velocity. Loads are very accurate and much softer to shoot than 124/125 bullets. Link to comment Share on other sites More sharing options...
bigboy69 Posted April 5, 2017 Author Share Posted April 5, 2017 13 hours ago, al503 said: I've been doing some experimenting with 135 x-treme HP bullets that I had lying around. 8.15 grains of 3n38 at 1.2" got 168 from a 4.5" bbl with 4 small bbl holes and 169 in a 4.5" bbl with no holes. 9.4 grains of AA7 got about the same velocity. Loads are very accurate and much softer to shoot than 124/125 bullets. IS THIS 9MM OR 38 SUPER? Link to comment Share on other sites More sharing options...
al503 Posted April 5, 2017 Share Posted April 5, 2017 8 hours ago, bigboy69 said: IS THIS 9MM OR 38 SUPER? 9mm. Link to comment Share on other sites More sharing options...
bigboy69 Posted April 7, 2017 Author Share Posted April 7, 2017 On 4/4/2017 at 8:18 PM, al503 said: I've been doing some experimenting with 135 x-treme HP bullets that I had lying around. 8.15 grains of 3n38 at 1.2" got 168 from a 4.5" bbl with 4 small bbl holes and 169 in a 4.5" bbl with no holes. 9.4 grains of AA7 got about the same velocity. Loads are very accurate and much softer to shoot than 124/125 bullets. I didnt think AA7 was good to use in 9mm?? I was thinking more like WAC Link to comment Share on other sites More sharing options...
al503 Posted April 7, 2017 Share Posted April 7, 2017 (edited) 9 hours ago, bigboy69 said: I didnt think AA7 was good to use in 9mm?? I was thinking more like WAC Its on the very slow end like 3n38, n105, sp2, etc. Many seem to be using WAC without issue. I like to play it safe. The slower, the better/safer in 9 major, IMHO. The only thing I didn't like about AA7 was that it is a little dirty. It's so slow that it doesn't have a complete burn, according to another member who ran my 124/125 load through quickload. With a much smaller charge and the fact that the bullet is in the barrel a touch longer, it seems to be a lot cleaner with the 135's in my limited testing so far. Edited April 7, 2017 by al503 Link to comment Share on other sites More sharing options...
bigboy69 Posted April 10, 2017 Author Share Posted April 10, 2017 On 4/7/2017 at 7:35 PM, al503 said: Its on the very slow end like 3n38, n105, sp2, etc. Many seem to be using WAC without issue. I like to play it safe. The slower, the better/safer in 9 major, IMHO. The only thing I didn't like about AA7 was that it is a little dirty. It's so slow that it doesn't have a complete burn, according to another member who ran my 124/125 load through quickload. With a much smaller charge and the fact that the bullet is in the barrel a touch longer, it seems to be a lot cleaner with the 135's in my limited testing so far. Thats good to know. i'm going to make my steel load with AA&, 6.6g with a blue 125g bullet. Link to comment Share on other sites More sharing options...
al503 Posted April 10, 2017 Share Posted April 10, 2017 10 hours ago, bigboy69 said: Thats good to know. i'm going to make my steel load with AA&, 6.6g with a blue 125g bullet. Should be a nice load. It'll be soft but that should be enough powder to still make some gas for the comp. Link to comment Share on other sites More sharing options...
andersonj55126 Posted May 12, 2017 Share Posted May 12, 2017 Here is load info for 147 and 124. I just received some 135 RN and 145 RN from Bayou and some 135 TC and 147 RN from Blue bullets. I will work on loads for these and report back. Full-length barrel with 3 small holes. Berry 147 RN - 6.49gn HS6 - 1.200" - 9mm WIN - 1179.3fps -173.4PF Berry 147 RN - 7.2gn 3n38 - 1.230" - 9mm WIN - 1172.7fps -172.4PF Berry 147 RN - 8.02gn AA7 - 1.230" - 9mm WIN - 1174fps -172.6PF (this is an interesting load because is has the same amount of gas as 124 HS6 but lower pressure and softer) Berrys round nose bullet profile is nice in that you can load much longer than typical bullets. MG 124 JHP- 8.06gn HS6 - 1.170" - 9mm WIN - 1379.5fps - 171.1PF Berry 24 RNTP - 8.14gn HS6 - 1.199" - 9mm WIN - 1383.2fps -171.5PF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now