flagaman Posted August 4, 2008 Share Posted August 4, 2008 Was at a local gun show today and found a 625-2. Thought I would try to pick it up to go with my 625-6. Turned the tag over; $879.00. Maybe a misprint so asked him his best price, $800.00 he says. Am I dreaming or have these things gone up this much since I got mine a year or so ago? Link to comment Share on other sites More sharing options...
HighVelocity Posted August 4, 2008 Share Posted August 4, 2008 The older 625's bring quite a premium, at least around here. Every once in a while I will see one for around $600 but usually over $700. A pre-lock 625 is very hard to come by lately. Link to comment Share on other sites More sharing options...
JamesLovesJammie Posted August 4, 2008 Share Posted August 4, 2008 It wasn't at a Scheels store, was it? Ours are EXTREMELY overpriced. They sell used guns for new price and new guns at Manufacturer's Suggested Retail price. They also won't budge on price and offer no help after the sale if you have any problems with your purchase. Link to comment Share on other sites More sharing options...
Airedale Posted August 4, 2008 Share Posted August 4, 2008 I found a clean 625-4 at my local P&G recently for $620 or so. Dave Link to comment Share on other sites More sharing options...
Carmoney Posted August 4, 2008 Share Posted August 4, 2008 The prices on all versions of the 5" 625 have been slipping upward since the factory discontinued that gun at the beginning of the year. Still, $800 is too much for a 625-2. He did you a favor, though, as the 625-2s are problematic guns with floating hands and tight chambers that create problems for shooters. Link to comment Share on other sites More sharing options...
EEH Posted August 5, 2008 Share Posted August 5, 2008 The prices on all versions of the 5" 625 have been slipping upward since the factory discontinued that gun at the beginning of the year. Still, $800 is too much for a 625-2. He did you a favor, though, as the 625-2s are problematic guns with floating hands and tight chambers that create problems for shooters. Speaking of discontinued--do you think they will start to re-make them again. Link to comment Share on other sites More sharing options...
rwmagnus Posted August 5, 2008 Share Posted August 5, 2008 The prices on all versions of the 5" 625 have been slipping upward since the factory discontinued that gun at the beginning of the year. Still, $800 is too much for a 625-2. He did you a favor, though, as the 625-2s are problematic guns with floating hands and tight chambers that create problems for shooters. Speaking of discontinued--do you think they will start to re-make them again. Of course simple supply and demand. Same story with the 610. Restrict supply for awhile then bring it back. The key is maintaining quality. Link to comment Share on other sites More sharing options...
flagaman Posted August 6, 2008 Author Share Posted August 6, 2008 Thanks all for your responses. If they would bring it back, I would hope they would offer 3, 4 and 5" barrels. I would practically kill for a 3" to balance out my J & K frame CCW collection. Link to comment Share on other sites More sharing options...
Airedale Posted August 6, 2008 Share Posted August 6, 2008 Thanks all for your responses. If they would bring it back, I would hope they would offer 3, 4 and 5" barrels. I would practically kill for a 3" to balance out my J & K frame CCW collection. They are currently producing 3" model 25s. Dave Link to comment Share on other sites More sharing options...
flagaman Posted August 6, 2008 Author Share Posted August 6, 2008 (edited) Thanks for the info. Believe these are the exotic, read ouch when you shoot it, lightweight type aren't they? I have, unfortunately, became recoil sensitive as I have matured. Arthritis and such I guess. I don't have any of the ultralite type guns at all, just uncomfortable after putting a few cylinders downrange. I do like the new nightguard, but again, it is probably on the light side for much shooting. I have even loaded down and still feel it after a bit. I am just not as tough as I used to be! Edited August 6, 2008 by flagaman Link to comment Share on other sites More sharing options...
Airedale Posted August 6, 2008 Share Posted August 6, 2008 Thanks for the info. Believe these are the exotic, read ouch when you shoot it, lightweight type aren't they? I have, unfortunately, became recoil sensitive as I have matured. Arthritis and such I guess. I don't have any of the ultralite type guns at all, just uncomfortable after putting a few cylinders downrange. I do like the new nightguard, but again, it is probably on the light side for much shooting. I have even loaded down and still feel it after a bit. I am just not as tough as I used to be! Nope-all steel, square butt model 25s-just like Mom used to make. Dave Link to comment Share on other sites More sharing options...
rwmagnus Posted August 6, 2008 Share Posted August 6, 2008 IMO Model 25's are one of the best if not the best 45ACP. 3"ers have always been sought after but I'll stay with the 5" and longer models. Link to comment Share on other sites More sharing options...
Kimberkid Posted August 6, 2008 Share Posted August 6, 2008 I was ecstatic when I found out that not only was S&W making 610's again, but that my local shop could actually get one. I was less ecstatic when he said it would be $750 plus shipping and tax. Link to comment Share on other sites More sharing options...
Viggen Posted August 6, 2008 Share Posted August 6, 2008 The prices on all versions of the 5" 625 have been slipping upward since the factory discontinued that gun at the beginning of the year. Still, $800 is too much for a 625-2. He did you a favor, though, as the 625-2s are problematic guns with floating hands and tight chambers that create problems for shooters. Speaking of discontinued--do you think they will start to re-make them again. Of course simple supply and demand. Same story with the 610. Restrict supply for awhile then bring it back. The key is maintaining quality. They will be back eventually. As for quality, Smith wouldn't know quality if it bit them in the butt. On the other hand, Smith does give you enough of a revolver to work with and you can make them run. Link to comment Share on other sites More sharing options...
Round_Gun_Shooter Posted August 6, 2008 Share Posted August 6, 2008 Thanks for the info. Believe these are the exotic, read ouch when you shoot it, lightweight type aren't they? I have, unfortunately, became recoil sensitive as I have matured. Arthritis and such I guess. I don't have any of the ultralite type guns at all, just uncomfortable after putting a few cylinders downrange. I do like the new nightguard, but again, it is probably on the light side for much shooting. I have even loaded down and still feel it after a bit. I am just not as tough as I used to be! Lew Horton special. Blue and Nickel Limit of 250 LOOK HERE Link to comment Share on other sites More sharing options...
flagaman Posted August 7, 2008 Author Share Posted August 7, 2008 Thanks, very nice smart looking piece with an equally smart looking price I see. Afraid that's a little steep for me. Unless I can hustle up some more money, I'm afraid that $600 or so is about it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now