STUGOTSIG Posted April 2, 2008 Share Posted April 2, 2008 I just picked up a 4lb keg of 320 mainly for .45ACP but, wanted to know if anyone loads 9mm with 320. Specs? Link to comment Share on other sites More sharing options...
spook Posted April 2, 2008 Share Posted April 2, 2008 I use N320 for Production 9x19 minor. I put 4.1 grain under a 124gr. RN @ 1.10" OAL. Start loading @ 3.9grain and you'll be fine. Link to comment Share on other sites More sharing options...
Skywalker Posted April 2, 2008 Share Posted April 2, 2008 Should work good! I use N320 for laoding 9x21mm (minor), .40" and 45". In 9x21mm, I load 4.3 grs of N320 under a 124grs FMJ bullet, @ 1.155" O.A.L., CCI small primers. The result is about 127 PF. Link to comment Share on other sites More sharing options...
eerw Posted April 2, 2008 Share Posted April 2, 2008 I run about 4.4 for about a 130PF with a MG124JHP out of a CZ Link to comment Share on other sites More sharing options...
8ring Posted April 3, 2008 Share Posted April 3, 2008 4.2gr N-320 under a Winchester 124gr FMJ averages about 1,050fps in my CZ85C. Chris Link to comment Share on other sites More sharing options...
pevadijk Posted April 3, 2008 Share Posted April 3, 2008 (edited) I load 4,4 grains N320 and I use 124 grain FMJ Berry's (COL=1.155) and that does slightly above PF130 in my 9mm Edge. Edited April 3, 2008 by pevadijk Link to comment Share on other sites More sharing options...
Skywalker Posted April 3, 2008 Share Posted April 3, 2008 FYI: Lapua (Vihtavuori manufacturer) has a reloading guide with listed loading data for all its powders. You'll find 9x19mm loading data (for handguns) on page 48. Link to comment Share on other sites More sharing options...
STUGOTSIG Posted April 3, 2008 Author Share Posted April 3, 2008 Thanks gang! Good starting point data:) Link to comment Share on other sites More sharing options...
Dalmas Posted April 3, 2008 Share Posted April 3, 2008 Here you can find all my 124/VV320 data. Dalmas Reloading Log Link to comment Share on other sites More sharing options...
ffl Posted April 4, 2008 Share Posted April 4, 2008 Dalmas, about halfway down your spread sheet has a glitch, and the column don't line up. might be translation to OO.Org who knows. could you check and repost. I am trying to develop a 38 Short colt load. dcs Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now