stick Posted August 14, 2023 Share Posted August 14, 2023 I'm running a P10F Competition Ready/Optics ready in Cary Optics. I ordered three Henning DWX Basepads with MBX Follower & Springs. Here's the info from Henning: For the P10 19 round magazine this kit will increase capacity to 22 + 1 IF YOU SHORTEN THE LEGS OF THE FACTORY FOLLOWER (SLIGHTLY). See last picture ! Adding MBX Extreme follower and spring: When you combine our extension with the MBX follower and spring kit in a 19 round P10 magazine, you will increase the capacity to 24 + 1. Problem is when I put 24 in the mag, I can run 24 rounds because I have one in the pipe and 23 in the mag. When I Barney with one round and put in the ag with 24, after the first shot, the gun doesn't cycle. The springs and followers are new. I put 24 dummy rounds into each mag for about a week. Anyone successfully running 24+1? Link to comment Share on other sites More sharing options...
sandflea316 Posted August 14, 2023 Share Posted August 14, 2023 Load the mag to capacity then unload it. Do it a dozen times. Do that and do what you did before keeping them loaded to 24, that should help Link to comment Share on other sites More sharing options...
ColoradoNick Posted August 15, 2023 Share Posted August 15, 2023 8 hours ago, stick said: I'm running a P10F Competition Ready/Optics ready in Cary Optics. I ordered three Henning DWX Basepads with MBX Follower & Springs. Here's the info from Henning: For the P10 19 round magazine this kit will increase capacity to 22 + 1 IF YOU SHORTEN THE LEGS OF THE FACTORY FOLLOWER (SLIGHTLY). See last picture ! Adding MBX Extreme follower and spring: When you combine our extension with the MBX follower and spring kit in a 19 round P10 magazine, you will increase the capacity to 24 + 1. Problem is when I put 24 in the mag, I can run 24 rounds because I have one in the pipe and 23 in the mag. When I Barney with one round and put in the ag with 24, after the first shot, the gun doesn't cycle. The springs and followers are new. I put 24 dummy rounds into each mag for about a week. Anyone successfully running 24+1? No problem 24+1 here Link to comment Share on other sites More sharing options...
stick Posted August 17, 2023 Author Share Posted August 17, 2023 On 8/14/2023 at 6:15 PM, sandflea316 said: Load the mag to capacity then unload it. Do it a dozen times. Do that and do what you did before keeping them loaded to 24, that should help I'll Try it. Thanks On 8/14/2023 at 10:48 PM, ColoradoNick said: No problem 24+1 here Did you do anything special, or did it work from the start? Link to comment Share on other sites More sharing options...
Drell Posted August 17, 2023 Share Posted August 17, 2023 Mine was 24+1 from the start in my DWX. No problem cycling. Link to comment Share on other sites More sharing options...
ColoradoNick Posted August 17, 2023 Share Posted August 17, 2023 4 hours ago, stick said: I'll Try it. Thanks Did you do anything special, or did it work from the start? Didn't even try and break the springs in, they just worked 24+1 from the start. I actually just got two more that also work. Link to comment Share on other sites More sharing options...
stick Posted August 18, 2023 Author Share Posted August 18, 2023 On 8/17/2023 at 11:19 AM, ColoradoNick said: Didn't even try and break the springs in, they just worked 24+1 from the start. I actually just got two more that also work. What gun are you running them in? Link to comment Share on other sites More sharing options...
ColoradoNick Posted August 18, 2023 Share Posted August 18, 2023 (edited) 1 hour ago, stick said: What gun are you running them in? What do you mean? A Full size DWX Edited August 18, 2023 by ColoradoNick Link to comment Share on other sites More sharing options...
Dirty_J Posted August 19, 2023 Share Posted August 19, 2023 This has been my experience with most MBX mags. They’ll load to capacity… but you need a 9 major Barney round to get the slide to cycle. Link to comment Share on other sites More sharing options...
Drell Posted August 19, 2023 Share Posted August 19, 2023 3 hours ago, ColoradoNick said: What do you mean? A Full size DWX Same running them in a DWX Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now