HighSpeedFocusedFailure Posted July 14, 2023 Share Posted July 14, 2023 Does anyone know if this part exists? I use mags that don’t lock back. I don’t ride the lever with thumbs or anything like that and I’d like to make sourcing slide stops easier for myself in the future. Anybody done it before on a S1 or seen it for sale? Link to comment Share on other sites More sharing options...
Open1215 Posted July 14, 2023 Share Posted July 14, 2023 EGW made them for tanfoglio at one point. They are hard to find and they stopped making them. Om not sure if they work on CZ or not. Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 14, 2023 Author Share Posted July 14, 2023 Cool, thanks for the info. Guess I’ll have to hit up some CZ places and see what they say. Link to comment Share on other sites More sharing options...
nkresho Posted July 15, 2023 Share Posted July 15, 2023 (edited) I imagine you could get a czechmate one to fit if you grind a little off. I think the sp01 is just a tad slimmer than the TS. CZECHMATE SLIDE STOP PIN NO LEVER | CZ-USA I'm not certain of the diameter though. Anybody with a TSO and Sp01 or czechmate and sp01 could check as they both come with pins and levers. Sold my TSO and the pins with it or i'd check for you. Edited July 15, 2023 by nkresho Link to comment Share on other sites More sharing options...
PhotoRecon Posted July 15, 2023 Share Posted July 15, 2023 (edited) I bought some pins for my Czechmate a couple years ago but they've been out of stock ever since. Got some .196" bar stock off Amazon and started making my own with my dremel. They work fine. Ohhh...checked the website and maybe the shortage is finally over... Edited July 15, 2023 by PhotoRecon Link to comment Share on other sites More sharing options...
Superkaratemonkeyfighter Posted July 15, 2023 Share Posted July 15, 2023 Cut the lever off a stock one. Link to comment Share on other sites More sharing options...
858 Posted July 15, 2023 Share Posted July 15, 2023 (edited) The CM pins are in stock in Europe. I've been buying from IPSC store lately, shipping takes maybe 10 days, and is pretty close to the price in the states. There's instructions on the forums how to make your own also. https://seboweapons.com/en/cz-75-ts-ts-orange-and-czechmate/444-slide-stop-pin-ts-shadow-2.html?search_query=slide+stop+pin&results=88 Here's the CZ75 pins (ET-130038) in stock: https://www.ipscstore.com/en/sport-guns-et-parts/6856-eemann-tech-pin-for-cz-75.html https://www.ericgrauffelonlineshop.com/fr/eemann-tech/1436-eemann-pin-for-cz-75--9384045007530.html IPSC Store lists parts as on customs docs as sporting goods, if that matters to you. Edited July 15, 2023 by 858 Link to comment Share on other sites More sharing options...
PhotoRecon Posted July 15, 2023 Share Posted July 15, 2023 BTW...the homemade pins cost me $1.15 each to make but if the factory are available I'll go with them instead. Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 15, 2023 Author Share Posted July 15, 2023 Whoa tons of info. Thanks everybody. Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 15, 2023 Author Share Posted July 15, 2023 1 hour ago, 858 said: The CM pins are in stock in Europe. I've been buying from IPSC store lately, shipping takes maybe 10 days, and is pretty close to the price in the states. There's instructions on the forums how to make your own also. https://seboweapons.com/en/cz-75-ts-ts-orange-and-czechmate/444-slide-stop-pin-ts-shadow-2.html?search_query=slide+stop+pin&results=88 Here's the CZ75 pins (ET-130038) in stock: https://www.ipscstore.com/en/sport-guns-et-parts/6856-eemann-tech-pin-for-cz-75.html https://www.ericgrauffelonlineshop.com/fr/eemann-tech/1436-eemann-pin-for-cz-75--9384045007530.html IPSC Store lists parts as on customs docs as sporting goods, if that matters to you. Thanks for all this! Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 15, 2023 Author Share Posted July 15, 2023 1 hour ago, PhotoRecon said: BTW...the homemade pins cost me $1.15 each to make but if the factory are available I'll go with them instead. Did you have homemade ones fail or otherwise not work? Search is a bit wonky, any chance you can link the thread about building them? Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 15, 2023 Author Share Posted July 15, 2023 3 hours ago, Superkaratemonkeyfighter said: Cut the lever off a stock one. I absolutely love this solution! Link to comment Share on other sites More sharing options...
HighSpeedFocusedFailure Posted July 15, 2023 Author Share Posted July 15, 2023 6 hours ago, PhotoRecon said: I bought some pins for my Czechmate a couple years ago but they've been out of stock ever since. Got some .196" bar stock off Amazon and started making my own with my dremel. They work fine. Ohhh...checked the website and maybe the shortage is finally over... This is awesome. Do you know the diameter for the SP01 Shadow pin? Link to comment Share on other sites More sharing options...
PhotoRecon Posted July 15, 2023 Share Posted July 15, 2023 I didn't follow any directions. I measured a factory one and then cut it off bar stock with a cutting wheel then did a little dremeling until the measurements of the groove matched. Maybe 15 to 20 minutes. No failures or problems. If I had the right tools it would have turned out pretty as well lol... I don't know the pin diameter on the SP01, sorry. Link to comment Share on other sites More sharing options...
shred Posted July 15, 2023 Share Posted July 15, 2023 TS2 pistols come with one of each-- lever and no, so you might be able to pry one loose from a TS2 shooter that isn't using it. Link to comment Share on other sites More sharing options...
858 Posted July 15, 2023 Share Posted July 15, 2023 3 hours ago, HighSpeedFocusedFailure said: Did you have homemade ones fail or otherwise not work? Search is a bit wonky, any chance you can link the thread about building them? I broke a forged pin I made for a TSO. It took 15k rounds. Link to comment Share on other sites More sharing options...
858 Posted July 15, 2023 Share Posted July 15, 2023 3 hours ago, HighSpeedFocusedFailure said: This is awesome. Do you know the diameter for the SP01 Shadow pin? They are not the same. CZ75 and S1 pins are shorter. The CM/TS/S2 pins can be shortened. Technically they'll fit in a S1 but will stick out the left side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now