deerslayer Posted May 13, 2022 Share Posted May 13, 2022 On 5/10/2022 at 7:55 PM, mannyc said: notanoperator9 & BRuss here are the pictures. M-ARMS Magwell and Monarch 1 Grips (thick) dimensions are: outer: 1.75" W x 2.65" L inner: 1.00" W x 1.65" L depth: .32" , aluminum, weight: 1.8 oz Bought it overseas directly from M-arms, took about two weeks to get here, like the magwell since it clamps around the opening and their grips are also great. What kind of basepads work with it? Link to comment Share on other sites More sharing options...
mannyc Posted May 13, 2022 Share Posted May 13, 2022 8 hours ago, deerslayer said: What kind of basepads work with it? I'm using CZ Customs basepads, works well with it, haven't tried the others. Link to comment Share on other sites More sharing options...
deerslayer Posted May 13, 2022 Share Posted May 13, 2022 10 hours ago, mannyc said: I'm using CZ Customs basepads, works well with it, haven't tried the others. Thanks, good to know. Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted May 23, 2022 Share Posted May 23, 2022 Comparison video between CZUB Brass Grips and the new Lok TSO brass grips: Link to comment Share on other sites More sharing options...
BRuss Posted May 24, 2022 Author Share Posted May 24, 2022 17 hours ago, MuayThaiJJ said: Comparison video between CZUB Brass Grips and the new Lok TSO brass grips: Thanks Nick, Would you be able to provide the dimensional measurements for the CZUB and LOK magwells? Weights from your video are: CZUB Brass Magwell Weight: 3.35oz LOKgrips Brass Magwell Weight: 4.52oz Link to comment Share on other sites More sharing options...
CC3D Posted May 28, 2022 Share Posted May 28, 2022 Something different, but I thought I'd throw it in here. 3D printed magwell on my TSO, been running this one for a while now with no issues. I prefer the plastic to a metal magwell, it is much easier on your feed lips and once it gets torn up, it costs less than a dollar to print a new one and throw it on. The one in this pic has probably 4-6 matches on it, 1k rounds, hundreds of reloads- has not broken or needed replacement yet. width: Outer diameter: 52mm Inner diameter: 44mm length: OD: 76mm ID: 65mm height: 22mm Link to comment Share on other sites More sharing options...
BRuss Posted June 1, 2022 Author Share Posted June 1, 2022 On 5/28/2022 at 11:57 AM, CC3D said: Something different, but I thought I'd throw it in here. 3D printed magwell on my TSO, been running this one for a while now with no issues. I prefer the plastic to a metal magwell, it is much easier on your feed lips and once it gets torn up, it costs less than a dollar to print a new one and throw it on. The one in this pic has probably 4-6 matches on it, 1k rounds, hundreds of reloads- has not broken or needed replacement yet. width: Outer diameter: 52mm Inner diameter: 44mm length: OD: 76mm ID: 65mm height: 22mm I dig it. Is it just PLA? Link to comment Share on other sites More sharing options...
CC3D Posted June 1, 2022 Share Posted June 1, 2022 11 hours ago, BRuss said: I dig it. Is it just PLA? Yes it is! Link to comment Share on other sites More sharing options...
Buufu Posted June 16, 2022 Share Posted June 16, 2022 On 5/10/2022 at 8:55 PM, mannyc said: notanoperator9 & BRuss here are the pictures. M-ARMS Magwell and Monarch 1 Grips (thick) dimensions are: outer: 1.75" W x 2.65" L inner: 1.00" W x 1.65" L depth: .32" , aluminum, weight: 1.8 oz Bought it overseas directly from M-arms, took about two weeks to get here, like the magwell since it clamps around the opening and their grips are also great. How do you rate the aggressiveness/grippiness of the monarch grips? I’m really interested in them but can’t find reviews on their grippiness. How would you rate them against lok bogies or others? Link to comment Share on other sites More sharing options...
mannyc Posted June 16, 2022 Share Posted June 16, 2022 10 hours ago, Buufu said: How do you rate the aggressiveness/grippiness of the monarch grips? I’m really interested in them but can’t find reviews on their grippiness. How would you rate them against lok bogies or others? I used the Lok Bogies G10 before and these are not as aggressive, in my opinion these sits in middle in the aggressiveness between the stock CZ Czechmate aluminum grips and the Lok Bogies G10 grips. Link to comment Share on other sites More sharing options...
rougeqc21 Posted August 27, 2022 Share Posted August 27, 2022 @BRuss are those the short gridloks with the sebo magwell in your original post pic? Link to comment Share on other sites More sharing options...
BRuss Posted August 29, 2022 Author Share Posted August 29, 2022 On 8/27/2022 at 1:24 PM, rougeqc21 said: @BRuss are those the short gridloks with the sebo magwell in your original post pic? Yep, CZ Shadow 2 Palm Swell GridLOK Aggressive Brass -Cut for Magwell? Short: TS 2 | Tactical Sport Orange | Czechmate (factory CZ Magwell) -Weight: 9 oz Stained with Birchwood Casey Brass Black Link to comment Share on other sites More sharing options...
Z-Chaos-Factor Posted August 18, 2023 Share Posted August 18, 2023 (edited) On 5/4/2022 at 10:51 AM, BRuss said: I was recently shopping around for a bigger magwell for my Czechmate, and found it somewhat difficult to find comparable dimensions between the different options other than "looks bigger". I'm hoping to start a thread where this information can be consolidated. I can provide approximate dimensions/weight for the stock and Sebo IPSC Open magwells. Czechmate/TSO Stock Magwell (CZ) Material - Aluminum Weight - 0.95oz Outer dimensions (~2.5"Lx1.66"W) Inner dimensions (~2"Lx1.5"W) Additional depth below frame (~0.24") Sebo Weapons IPSC Open Material - Aluminum Weight - 1.45oz Outer dimensions (~2.9"Lx1.9"W) Inner dimensions (~2.5"Lx1.8"W) Additional depth below frame (~0.3") Did you order the sebu directly through their website??? How long did it take to get into the states? Did you ever compare it to the lok magwell? Edited August 18, 2023 by Z-Chaos-Factor Link to comment Share on other sites More sharing options...
BRuss Posted August 21, 2023 Author Share Posted August 21, 2023 (edited) On 8/18/2023 at 12:34 AM, Z-Chaos-Factor said: Did you order the sebu directly through their website??? How long did it take to get into the states? Did you ever compare it to the lok magwell? I ordered from IPSC Store. Both times it took about 1-2 weeks. I have an aluminum LOK magwell on a 9mm TSO. LOKGrips CZ TSO | TS Series Magwell GridLOK Aluminum Material - Aluminum Weight - 1.41oz Outer dimensions (~2.89"L x 1.96"W) Inner dimensions (~2.44"Lx1.85"W) Additional depth below frame (~0.46") Edited August 21, 2023 by BRuss Lok magwell details and comparison Link to comment Share on other sites More sharing options...
858 Posted August 21, 2023 Share Posted August 21, 2023 The IPSC Store is pretty decent. I bought an Eeman magwell from them, it took about 2 weeks. Link to comment Share on other sites More sharing options...
Michaelsabre Posted February 28 Share Posted February 28 On 5/28/2022 at 10:57 AM, CC3D said: Something different, but I thought I'd throw it in here. 3D printed magwell on my TSO, been running this one for a while now with no issues. I prefer the plastic to a metal magwell, it is much easier on your feed lips and once it gets torn up, it costs less than a dollar to print a new one and throw it on. The one in this pic has probably 4-6 matches on it, 1k rounds, hundreds of reloads- has not broken or needed replacement yet. width: Outer diameter: 52mm Inner diameter: 44mm length: OD: 76mm ID: 65mm height: 22mm Did you 3D print it youself? It looks awesome! Link to comment Share on other sites More sharing options...
BigPerformer337 Posted April 3 Share Posted April 3 I know this is an old one but is there a magwell that actually blends well with the frame (without having to dremel it to match)? The factory one, Floyds custom, & Eeman tech brass all leave a solid lip on the inside where mags can get hung up on reloads. Thanks guys! Link to comment Share on other sites More sharing options...
BRuss Posted April 8 Author Share Posted April 8 On 4/3/2024 at 4:55 PM, BigPerformer337 said: I know this is an old one but is there a magwell that actually blends well with the frame (without having to dremel it to match)? The factory one, Floyds custom, & Eeman tech brass all leave a solid lip on the inside where mags can get hung up on reloads. Thanks guys! The LOK magwell did not need additional blending for my TSO. Link to comment Share on other sites More sharing options...
BigPerformer337 Posted April 9 Share Posted April 9 16 hours ago, BRuss said: The LOK magwell did not need additional blending for my TSO. Thank you . I just wish the LOK didn’t look like a skirt lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now