MuayThaiJJ Posted January 28, 2021 Share Posted January 28, 2021 Hey guys, I'm converting a few 45acp frames (one for me and one for a buddy) to host 9mm uppers. Both frames are ramped (his is Springfield Champion Loaded, mine is a Pantera 2011). So I am wondering if I could use one ejector to work with both calibers? I was looking at this one: https://shopwilsoncombat.com/Extended-Ejector-38-Super_9mm_45-ACP-Colt-Government_Commander_Officers-Blue/productinfo/34S/ Does anyone else have a success story with a single ejector handling both 45acp and 9mm? thanks! Link to comment Share on other sites More sharing options...
HI5-O Posted January 28, 2021 Share Posted January 28, 2021 I use the Brazos tuned ejector for 9mm single stack, 38SC open and 40 limited with no problems. Should work with 45 but I have not installed one in a 45. Haven’t shot any of my 45s in years. Can always call Brazos and ask. Link to comment Share on other sites More sharing options...
IPSCLUVERRR Posted January 30, 2021 Share Posted January 30, 2021 I have all of my .45’s slides cut for a 9mm ejector channel so that I don’t have this issue. I can swap 9mm, .40 and .45 slides all day long Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted January 30, 2021 Author Share Posted January 30, 2021 5 minutes ago, IPSCLUVERRR said: I have all of my .45’s slides cut for a 9mm ejector channel so that I don’t have this issue. I can swap 9mm, .40 and .45 slides all day long What ejector do you use to handle both 9mm and 45acp? Link to comment Share on other sites More sharing options...
IPSCLUVERRR Posted January 30, 2021 Share Posted January 30, 2021 I’ve been using the egw oversized ejector and machining them to fit. I have a couple of the bunker arms ejectors that I’m waiting to try out Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted January 30, 2021 Author Share Posted January 30, 2021 13 minutes ago, IPSCLUVERRR said: I’ve been using the egw oversized ejector and machining them to fit. I have a couple of the bunker arms ejectors that I’m waiting to try out This one? https://www.egwguns.com/hd-oversized-ejector-38-9mm-40-10mm-blue Link to comment Share on other sites More sharing options...
MuayThaiJJ Posted January 30, 2021 Author Share Posted January 30, 2021 Hmm, interesting - my SPS Pantera slide in 45acp looks to be cut for 9mm ejector already. When locked I can see a GAP from the ejector to the middle of the slide, empty space. I tried sliding it onto my Springfield 1911 and it has the width for the 9mm ejector, but not the height clearance. The 9mm ejector is a smidge too tall...could this mean SPS has all their slides cut for 9mm??? And all I need is a tuned ejector for this to work??? Link to comment Share on other sites More sharing options...
IPSCLUVERRR Posted January 31, 2021 Share Posted January 31, 2021 18 hours ago, MuayThaiJJ said: This one? https://www.egwguns.com/hd-oversized-ejector-38-9mm-40-10mm-blue yep thats the one Link to comment Share on other sites More sharing options...
IPSCLUVERRR Posted January 31, 2021 Share Posted January 31, 2021 1 hour ago, MuayThaiJJ said: Hmm, interesting - my SPS Pantera slide in 45acp looks to be cut for 9mm ejector already. When locked I can see a GAP from the ejector to the middle of the slide, empty space. I tried sliding it onto my Springfield 1911 and it has the width for the 9mm ejector, but not the height clearance. The 9mm ejector is a smidge too tall...could this mean SPS has all their slides cut for 9mm??? And all I need is a tuned ejector for this to work??? possibly, unfortunately I do not have a SPS so I cannot tell you for sure but I would not be surprised if the slide was cut for a 9mm ejector. Link to comment Share on other sites More sharing options...
Don_B Posted January 31, 2021 Share Posted January 31, 2021 I'm sure these can be made to work but my concern would be a 9mm ejector being that close to a large pistol primer when ejecting a live round. Link to comment Share on other sites More sharing options...
Aircooled6racer Posted January 31, 2021 Share Posted January 31, 2021 Hello: Just change the ejector, it's a 5 minute job. EGW make some of the best stuff out there. Thanks, Eric Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now