Chris777 Posted February 21, 2020 Share Posted February 21, 2020 Curious to hear if anyone has used the MA expander die for 9mm. Am currently looking at the Redding, Lyman M dies as well for my 1050 and am curious about the MA die. Anyone use them or have a comparison to the usual suspects? Thanks Chris Link to comment Share on other sites More sharing options...
iflyskyhigh Posted February 21, 2020 Share Posted February 21, 2020 Are you not expanding at the powder drop?Sorry. I know it’s not what you asked.Have you considered the Mr Bullet funnel?I ask because if you are the Mr Bullet powder funnels are just about the best thing out there. Especially if you are using mixed range pick up 9MM brassI was having issues with inconsistencies in belling with the Dillon powder funnel. Some we belled too much and some not enough. Switched to the Mr Bullet and all the issues went away. And now that I actually have a Mr Bullet it works out perfect. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
36873687 Posted February 22, 2020 Share Posted February 22, 2020 I just got one my self. Think his reason powder funnel bell sucks Link to comment Share on other sites More sharing options...
Chris777 Posted February 22, 2020 Author Share Posted February 22, 2020 6 hours ago, iflyskyhigh said: Are you not expanding at the powder drop? Sorry. I know it’s not what you asked. Have you considered the Mr Bullet funnel? I ask because if you are the Mr Bullet powder funnels are just about the best thing out there. Especially if you are using mixed range pick up 9MM brass I was having issues with inconsistencies in belling with the Dillon powder funnel. Some we belled too much and some not enough. Switched to the Mr Bullet and all the issues went away. And now that I actually have a Mr Bullet it works out perfect. Sent from my iPhone using Tapatalk - I have used the MBF funnel and it works ok, but is a PIA to adjust when switching to different bullets mfg (I buy what ever bullet is on sale and sometimes they require different belling) - On my 1050, on the upstroke, the MBF cause the die head to pull and then make a loud clack when the expander is pulled out of the case. Its just a noise thing, but don't like it - Like to have the adjustability of a seperate die - so I am looking at a dedicated expander in station 3 (swage station on my 1050) - Not sure if there are any differences between the various die mfg's when it comes to expanders. I have a MA 9mm size and decapping die and wanted to some feedback on their expanders. Link to comment Share on other sites More sharing options...
RGA Posted February 22, 2020 Share Posted February 22, 2020 I think the M-die is the best in the business if you are looking for a seperate expanding step. Can be a *** to adjust though with the thin nut on top. (Or you could choose to adjust using the die body.) Link to comment Share on other sites More sharing options...
36873687 Posted February 22, 2020 Share Posted February 22, 2020 13 hours ago, Chris777 said: - I have used the MBF funnel and it works ok, but is a PIA to adjust when switching to different bullets mfg (I buy what ever bullet is on sale and sometimes they require different belling) - On my 1050, on the upstroke, the MBF cause the die head to pull and then make a loud clack when the expander is pulled out of the case. Its just a noise thing, but don't like it - Like to have the adjustability of a seperate die - so I am looking at a dedicated expander in station 3 (swage station on my 1050) - Not sure if there are any differences between the various die mfg's when it comes to expanders. I have a MA 9mm size and decapping die and wanted to some feedback on their expanders. So we’re on 1050 u going to use ? MA die. Unless u buy after market tool head or use at station two ? Link to comment Share on other sites More sharing options...
HesedTech Posted February 22, 2020 Share Posted February 22, 2020 I’ve used the Mdie and while it works well I Recommend the expander plug from NOE with the Lee Universal expander die. Much stronger combo. The links for plug and die: https://noebulletmolds.com/site/shop/expanders/expander-plug-pistol/359-x-355-p-exp-plug https://leeprecision.com/universal-case-expanding-die.html However, I use a Dillon 1050 now with the MBF powder funnel and found no need for the NOE expander. Link to comment Share on other sites More sharing options...
iflyskyhigh Posted February 23, 2020 Share Posted February 23, 2020 - I have used the MBF funnel and it works ok, but is a PIA to adjust when switching to different bullets mfg (I buy what ever bullet is on sale and sometimes they require different belling) - On my 1050, on the upstroke, the MBF cause the die head to pull and then make a loud clack when the expander is pulled out of the case. Its just a noise thing, but don't like it - Like to have the adjustability of a seperate die - so I am looking at a dedicated expander in station 3 (swage station on my 1050) - Not sure if there are any differences between the various die mfg's when it comes to expanders. I have a MA 9mm size and decapping die and wanted to some feedback on their expanders.All valid points. If you aren’t already, try a little Hornady One Shot. That “THUNK” you feel and hear when the case gets pulled out of the powder expander should go away. Link to comment Share on other sites More sharing options...
hurley326 Posted February 23, 2020 Share Posted February 23, 2020 I use a Lee Universal Expander with the insert taken out and a Mr Bullet Feeder powder funnel inside of it instead. Im loading on a Mk7 Evo Pro Link to comment Share on other sites More sharing options...
ddc Posted February 26, 2020 Share Posted February 26, 2020 (edited) On 2/23/2020 at 2:44 PM, hurley326 said: I use a Lee Universal Expander with the insert taken out and a Mr Bullet Feeder powder funnel inside of it instead. Im loading on a Mk7 Evo Pro I'm doing the same. It's great being able to adjust the flare without messing with the powder system. Mine is on an 1100 in station 2. Took the swage backer out. Eventual plan is to get the CNC toolhead and move it to station 3 and either put the swage system back in or get a swage sense from Immortal Arms. Correction: Reference to "swage sense" should have said "primer pocket probe" Edited February 27, 2020 by ddc Link to comment Share on other sites More sharing options...
36873687 Posted February 27, 2020 Share Posted February 27, 2020 7 hours ago, ddc said: I'm doing the same. It's great being able to adjust the flare without messing with the powder system. Mine is on an 1100 in station 2. Took the swage backer out. Eventual plan is to get the CNC toolhead and move it to station 3 and either put the swage system back in or get a swage sense from Immortal Arms. Can u use this in station two as backer die also? Got feeling that’s a no but trying not to buy a toolhead Link to comment Share on other sites More sharing options...
ddc Posted February 27, 2020 Share Posted February 27, 2020 14 hours ago, 36873687 said: Can u use this in station two as backer die also? Got feeling that’s a no but trying not to buy a toolhead I don't know. I was curious about that also but have not looked into the possibility. Link to comment Share on other sites More sharing options...
RGA Posted February 29, 2020 Share Posted February 29, 2020 There is a easy way to find out. Just try it and see what happens... Link to comment Share on other sites More sharing options...
36873687 Posted February 29, 2020 Share Posted February 29, 2020 (edited) Tried the 9 mm die on 1050. On toolhead u won’t use lock ring on the die. On expander had shave the nylon nut down to be able to lock it down. No biggie I think Wayne is getting thinner nuts to work. My brass is processed an swaged already so I’m just taking backer die out use in station two. Much smoother than belling at powder drop Edited February 29, 2020 by 36873687 Link to comment Share on other sites More sharing options...
Chris777 Posted March 6, 2020 Author Share Posted March 6, 2020 On 2/29/2020 at 1:44 PM, 36873687 said: Tried the 9 mm die on 1050. On toolhead u won’t use lock ring on the die. On expander had shave the nylon nut down to be able to lock it down. No biggie I think Wayne is getting thinner nuts to work. My brass is processed an swaged already so I’m just taking backer die out use in station two. Much smoother than belling at powder drop Thanks... Just picked up the MA 9mm expander as well. Found the same issues you noted with the nylon lock nut being just a bit too thick to be able to lock it down at the point where it flares the case to the required dimension. Running a 1050 as well. Will try the hardware store for a thinner jam nut or try to sand or shave down the nylon nut that ships with the expander. If there is V2 in the works, I think the expander and die body need to be increased in length by 1/2" to fit everyone's press. The MA expander die is quite a bit shorter overall than the M-die, but the MA machining and finishing cant' be compared to other commercial dies. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now